HAMPTON BAY HBDB150J-GS User manual

PART DESCRIPTION
A Front Panel (x1)
B Back Panel (x1)
C Lid Panels (x1)
D Bottom Panel (x1)
Be sure to place ridged side up for proper assembly
E Side Panels (x2)
F Lid Support (Pre-assembled at the factory, x1)
G Self-Tapping Screws (x12)
H Gas Shock Bracket/Hinges (x2)
I Gas Shocks (x2)
J Machine Screws (x6)
USE AND CARE GUIDE
150 GALLON DECK BOX ASSEMBLY
A
C
B
E
I
H
F
J
G
PACKAGE CONTENTS
THIS SIDE UP
D
Warranty
WHAT IS COVERED
This product is covered under a 10 year limited warranty against
defects inmaterials and workmanship from the date of purchase.
WHAT IS NOT COVERED
This warranty does not cover damage due to neglect, abuse, or weather
related damage.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit
HAMPTONBAY.com
Questions, Problems, Missing Parts? Before returning to the store,
call Customer Service at 1-855-HD-HAMPTON.
Monday – Friday: 8 am to 7 pm, EST / Saturday: 9 am to 6 pm, EST
HAMPTONBAY.COM
Care and Cleaing
• Use soap and water with a soft cloth to clean this product. DO NOT use
bleach, ammonia, or caustic cleaners, as these will damage the finish.
• Locks, latches, and hinges should be lubricated regularly, and gas
shocks wiped with a dry cloth to remove dust and dirt.
• Rinse with clean water and dry with a soft, absorbent cloth towel.
Safety Information
CAUTION: Never use this product to store
flammables, explosives, or hazardous materials.
CAUTION: To avoid risk of suffocation, never
allow children to play inside the container.
CAUTION: Supports 225 lbs., evenly distributed
weight.
CAUTION: This product is not a toy and not
intended for use by children.
Pre-Assembly
TOOLS REQUIRED
Phillips Screwdriver
Item #317-694-702
Model #HBDB150J-GS
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay
through the purchase of this deck box. We strive to continually create
quality products designed to enhance your home. Visit us online at
HAMPTONBAY.com to see our full line of products available for your
home improvement needs.
Thank you for choosing Hampton Bay.

Assembly
1Attaching Side Panels to the Bottom Panel
• Place the bottom panel (D)
ona level surface.
• Slide a side panel (E) onto the
bottom panel (D), then repeat
with the other panel.
E
E
D
Assembly
6Attaching the Bracket/Hinge
• Position the Bracket/Hinge
(H)into the grooves at the top
inside corner of the back panel
(B). Secure in place using
three Machine Screws (J) and
two Self-Tapping Screws (G).
• Use two Machine Screws (J)
to attach the Bracket/Hinge
(H) to the Side Panel(E).
• Use one Machine Screw (J)
toattach the Bracket/Hinge
(H) to the Back Panel (B). Use
twoSelf-Tapping screws (G)
toattach Braket/Hinge (H)
tothe Back Panel (B).
• Repeat this process to
assemble the other Bracket/
Hinge (G).
E
B
H
G
J
Assembly
7Attaching the Bracket/Hinges to the Lid Panel
• Attach the Bracket/Hinge (H)
to the inside of the Lid Panel
(C) with four Self-Tapping
Screws (G) on each Bracket/
Hinge (H). 90°
H
G
C
Assembly
8Attaching the gas Shocks
• Attach the Gas Shocks (I)
to the two round nubs on
the Bracket/Hinges (H) by
pushing both ends until you
hear a “snap.”
H
I
Assembly
4Attaching Front and Back Panels to the Bottom Panel
Be sure front and back panel tabs are
engaged to the base panel.
• Rotate box so that the bottom side is up. Using finger
pressure, snap base panel onto back panel tabs.
• Repeat this process for front panel.
Assembly
2Attaching the Back Panel
• Slide the back panel (B) into
position using the slots at
the rear edge of the two side
panels (E).
• Press the lock tabs (1) into
the slots (2) in the bottom
panel and lock in place. E
E
B
D
12
Assembly
3Attaching the Front Panel
• Slide the front panel (A) into
position using the slots at the
front edge of the two side
panels (E).
• Press the lock tabs (1) into
the slots (2) in the bottom
panel and lock into place.
A
D
1
2
Assembly
5Attaching the Lid
• Hold the Lid Panel (C)
horizontally and align the lid
tabs (1) with the back panel
hinge pins (2).
• Push the Lid Panel (C)
horizontally into the back
panel hinge pins (2) and
rotate the Lid (C) closed
tolock into place.
C
12
90°