HAMPTON BAY CRESTRIDGE FCS60619R-ST User manual

THANK YOU
USE AND CARE GUIDE
CRESTRIDGE 4PC DEEP SEATING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1005 605 239
Model #FCS60619R-ST
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this set. We strive to continually create
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!

2
Table of Contents
Table of Contents....................................2
Important Safety Instructions ..........................2
What is covered ................................... 3
What is not covered ................................3
Warranty .......................................... 3
Pre-Assembly....................................... 3
Planning Assembly ................................. 3
Hardware Included ................................. 4
Chair Package Contents ....................... . . . . . . 4
Glider Chair Package Contents ....................... .. . . . . . 5
Table Package Contents ...................... . . . . . . . 5
Care and Cleaning ............................ . . . . . . 11
Chair Assembly .....................................6
Glider Chair Assembly .......................... . . . . . . 8
Table Assembly ....................................10
Important Safety Instructions
Save These Instructions .............................
Read All Instructions Before Use.......................
2
2
SAVE THESE INSTRUCTIONS
WARNING: THIS SET WAS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE. HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
3. Do not move chair while occupied. Failure
to obey this caution could result in injury.
the manufacturer.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: This set is heavy, and may require two
adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the set.
WARNING: Weight limit for each chair is 250 lbs
(113.39 Kg) for each seat.
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
3 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames and fabric to be free of manufacturing defects to the original purchaser for three years, and a two year limited
warranty of the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
comercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.

M6x15 Combination Bolt
M6x30 Combination Bolt
24+1
10+1
AA
BB
M6x25 Bolt 4+1 CC
M8x30 Combination Bolt 4+1 DD
M8x20 Combination Bolt 2+1 EE
Plastic Washer 4+1 FF
M8x30 Countersunk Bolt 4+1 GG
Hex Wrench 1 HH
Wrench 1 II
Part Description Quantity
4
Pre-assembly (continued)
HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
CHAIR PACKAGE CONTENTS
Part Description Quantity
A Sling Bucket 2
B Right Arm 2
C Left Arm 2
DConnector Bar 2
ESupport Bar 2
A
B
C
E
D
AA BB CC DD EE
FF GG HH II

5
Pre-assembly (continued)
GLIDER CHAIR PACKAGE CONTENTS
Part Description Quantity
F Glider Chair Right Arm 1
G Glider Chair Left Arm 1
H Glider Chair Sling Bucket 1
I Glider Chair Connector Bar 1
J Glider Base 1
F
H
G
I
J
TABLE PACKAGE CONTENTS
K
N
M
L
Table Rim
Table Leg
Leg Connector
1
4
1
K
L
M
Tile 3 N
Part Description Quantity
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

6
Chair Assembly
1Connecting The Sling Bucket, Connector Bar And Support Bar To The Right Arm
2Connecting The Sling Bucket, Connector Bar And Support Bar To The Left Arm
Place the right arm (B) on a soft surface.
Attach the connector bar (D) to the right arm (B)
using M6x15 combination bolts (AA).
Insert the support bar (E) into the right arm (B).
Do not tighten all bolts at this step.
Attach the sling bucket (A) to the right arm (B) using M6x30
combination bolts (BB) and an M8x30 combination bolt (DD),
as shown below.
Attach the sling bucket (A) to the left arm (C)
using M6x30 combination bolts (BB) and an
M8x30 combination bolt (DD), as shown below.
Insert the support bar (E) into the left arm (C).
Do not tighten all bolts at this step.
Attach the connector bar (D) to the left arm (C)
using M6x15 combination bolts (AA).

7
Chair Assembly (continued)
3Securing The Support Bar
4Tightening All Bolts
Turn the chair right side up.
Do not fully tighten all bolts at this step.
Tighten the support bar (E) to the two chair
arms (B&C) using M6x25 bolts (CC).
Once all of the bolts are in place, fully tighten all the bolts
using hex wrench (HH).
Ensure all connections are secure before use.
CC
E
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

8
Glider Chair Assembly
1Connecting The Glider Chair Sling Bucket And Glider
Chair Connector Bar To The Glider Chair Right Arm
2Connecting The Glider Chair Sling Bucket And Glider
Chair Connector Bar To The Glider Chair Left Arm
Place the glider chair right arm (F) on a soft surface.
Attach the glider chair connector bar (I) to the glider chair right arm (F) using
M6x15 combination bolts (AA).
Do not tighten all bolts at this step.
Attach the glider chair sling bucket (H) to the glider chair right arm (F) using an M6x30
combination bolt (BB) and an M8x20 combination bolt (EE).
Attach the glider chair sling bucket (H) to the glider chair left arm (G) using an M6x30
combination bolt (BB) and an M8x20 combination bolt (EE).
Do not tighten all bolts at this step.
Attach the glider chair connector bar (I) to the glider chair
left arm (G) using M6x15 combination bolts (AA).
EE BB
AA AA
H
F
I
EE
AA AA
BB
G
H
I

9
Glider Chair Assembly (continued)
3Attaching The Glider Base To
The Two Glider Chair Arms
4Checking The Glider Chair
Attach the glider base (J) to the two glider chair arms (F & G)
using M8x30 countersunk bolts (GG) and plastic washers (FF).
Do not fully tighten all bolts at this step.
FF
GG
J
Once all of the bolts are in place, fully tighten all the
bolts using the hex wrench (HH) and wrench (II).
Turn the glider chair right side up.
Ensure all connections are secure before use.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

10
Table Assembly
1Attaching The Table Legs To The Table Rim
2Attaching The Leg Connector To The Table Legs
Attach the leg connector (M) to the table legs (L)
using M6x15 combination bolts (AA).
Do not tighten all bolts at this step.
Place the table rim (K) upside down on a soft surface.
Attach the table legs (L) to the table rim (K) using
M6x15 combination bolts (AA).
Do not tighten all bolts at this step.
AA
AA
M
L
AA
L
K