HAMPTON BAY MADISON 13H-001-SR2 User manual

THANK YOU
USE AND CARE GUIDE
1-PAIR MADISON LOUNGE CHAIR SWIVEL ROCKERS
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
HAMPTONBAY.COM
Item #583-070
Model #13H-001-SR2
8.00 a.m. - 6.00 p.m., EST, Monday - Friday
1-877-527-0313
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Hampton Bay!

2
Table of Contents
Safety Information
DANGER: Please keep children out of the assembly area
during assembly. Do not let children play on the chairs
without adults’ attendance.
WARNING: The chair will fall if over-rocking.
The chair will make noise if the bolts are not fully tightened.
CAUTION:
IMPORTANT: Please check the tightness of bolts every
30 days.
Warranty
5 YEAR FRAME / 1 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frame to be free of manufacturing defects to the original purchaser for ve years and the fabric for one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, re, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Table of Contents.......................................................
Safety Information......................................................
Warranty.....................................................................
5 Year Frame Limited Warranty, 1 Year Fabric
Pre-Assembly............................................................
Planning Assembly.....................................................
Hardware Included.....................................................
Package Contents .....................................................
Assembly .................................................................
Limited Warranty ........................................................
What Is Covered...........................................................
What Is Not Covered......................................................
2
2
2
2
2
2
3
3
3
4
5
Care Instructions......................................................... 2
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat frames with liquid wax for maximum protection against
UV light and salty, damp air. When not in use, store furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may
be cleaned by hand with a mild solution of soap and water. Rinse cushions thoroughly and allow to drip dry. Do not machine wash or
tumble dry, as cushions may shrink. Do not use bleach or solvents on fabrics. When cleaning the tabletop make sure to use a soft,
clean cloth that doesn’t bleed color as well.
You may contact our customer service department with any questions by phone at 1-877-527-0313 or visit www.hamptonbay.com.
Care Instructions

3 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 20 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Nut 8
BB Bolt (M8x40) 8
CC Washer 16
DD Washer plate 8
EE Bolt cap 16
FF Nut cap 16
FF
Wrench
AA
EE
BB CC DD
GG
GG
1

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Chair seat 2
B Chair base 2
C T-rock 2
A
B
C

5 HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly
1 Aligning the T-rock mechanism 2 Assembling the T-rock
□Place the chair seat (A) upside down on a clean smooth
surface.
□Align the T-rock (C) to the U-bar (1) of the chair seat (A).
Place the metal plates of the T-rock (C) against two
plastic stoppers (2).
□Attach each metal plate (3) on the T-rock (C) to the chair seat
(A) with two bolts (BB), two washers (CC), and one washer plate
(DD) using the wrench (GG). Insert the hardware from the top side
of the U-bar.
□Place the metal plate on bottom side of U-bar and attach with two
nuts (AA), two washers (CC), and one washer plate (DD) using the
wrench.
□ Tighten all the bolts using the wrench (GG).
□ Cover all bolts with the bolt caps (EE) and nut caps (FF).
FRONT SIDE
2
REAR SIDE 1
2
C
DD
DD
CC
AA
FF
CC
3
C
A
AA
EE
BB
CC
EE
BB
CC
DD
FF
IMPORTANT: It is very important to position/assemble
the washer plate (DD) completely. Carefully follow the
diagram below.
WARNING: Do not try to put the T-rock on the rear side.
See the diagram below.
IMPORTANT: Please identify the front side and rear side
and put the T-rock on the front side only.
IMPORTANT: You may need to loosen pre-installed bolts
on the T-rock if the T-rock and the U-bar cannot be lined up.

6
Assembly (continued)
3 Assembling the base 4 Checking the stability
□Turn over the chair seat (A).
□the shaft (1) of the chair assembly into the
chair base (B) until the chair seat (A) is completely locked
into the chair base (B). The plastic insert in the base should
lock the metal shaft and click in place.
□Check the stability of the chair.
□Repeat steps 1 through 3 for the other chair.
A
B
1
Insert and twist

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. – 6.00 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.