HandHeld ALGIZ 10X User manual

ALGIZ 10X
VEHICLE DOCK
QUICK START GUIDE
POWER SPECIFICATION
Do not power both DC input options at the same time. This may cause damage to the vehicle
dock or the ALGIZ 10X.
1 2 3
DC Input Jack
DC 9-36V Input
Terminal Block
handheld

INSERT ALGIZ 10X INTO THE VEHICLE DOCK
1. Insert the ALGIZ 10X in the vehicle dock as shown in the picture.
2. Push down the top latch to lock the unit in place.
REMOVE ALGIZ 10X FROM THE VEHICLE DOCK
1. Pull the latch on the back to release the ALGIZ 10X.
2. Remove the ALGIZ 10X carefully.
SPECIFICATION
Mount: VESA 75. Screw hole: M3x5mm
POWER INPUT
There are two options to connect a power source. Both options accept a voltage range
between 9~36V.
Cauon!
CAUTION!
Use only included power cord or ALGIZ 10X AC/DC adapter. Other power cords or adapters
may cause damage to the vehicle dock or the ALGIZ 10X.