
1. FM scan
2. Full automatic scan/Memory station
3. AM unit
4. Battery level
5. FM, SW unit
6. Frequency point/Time/Station address
7. Short Wave
8. Sleep time
9. AM
Features
Before turning the radio On/Off, put the 18650 battery in, and pay attention to
the positive and negative poles. The LCD screen will light up and display the time
status. Press the Power button to turn on the radio. To turn it off, press the Power
button again.
Long-press the Sleep time button and the LCD will display 90. Press it again
and it will change sleep time until riches Off.
To select the broadcast receiving mode, press the Band button to choose
between AM, FM, SW1, and SW2. You can fine-adjust the radio station with the
minimum step value of 0,1MHz for FM or 0,005MHz for SW. To fine-tune, short-press
the Tune + or Tune - buttons, and to rapidly search radio stations, hold the Tune +/-
buttons for 1 second. For complete automatic scanning, long-press the Scan button,
and the scanning indicator will start flashing in the upper left corner of the display.
After completing the automatic scan, press M+ or M- to pick up the station.
To adjust the volume, press the Vol+ or Vol- buttons to increase or decrease
the volume from 00 to 31.