Happy Beds Ava 5 Drawer Dressing Table User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Ava 5 Drawer Dressing Table

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

02
15 Bottom of drawer front
19
21
Right side
1
Bottom of drawer
04
Back
Description
Rear right upper of drawer
1
Qty
Rear intermediate of drawer
1
Tray lower right front
1
1
Mirror panel
Upper base
09 Bottom of drawer rear
72
27
20
18
Box
1
1
1
Top right of drawer front
Box
Tray bottom left
1
1
Tray upper left
1
125
Upper left right side
1
1
Bottom left of drawer
78
08
07
06
05
01
Left side of drawer
1
17
07
78
13
10
Parts List
1
1
2
Bottom left of drawer side
ofPage
Bottom left of drawer side
Intermediate of drawer front
1
Top left of drawer front
Qty
Tray bottom right rear
1
1
1
1
1
1
1
1
2
Description
PartPart
1
1
1
1
1
1
1
1
Left side
17
22
23
24
Top
73
79
72
27
73
72 23
19
79
24
20
14
12
22
04
05
25
24
16 15
06
2
1
1
2
1
1
1
1
1
1
1
1
1
12
11
2
1
1
1 1
1
3
Right side of drawer
2
2
2
21
18 73
08
09
10
11
01 02
02
16
Bottom of drawer rearDivision
14
Bottom right of drawer side
21
Left side of drawer
Right side of drawer
13
Vendor: S000139

Description
A1 1
Trapeze
5
5
5
VD
Structural Screw Cover
G
E
1
Small plastic foot
VC
VB Metalic slide the left field
L
Drawer slide left
Drawer slide right
46
2
1
Structural Screw
Simple Minifix Screw
J
1
P5
4,5 x 45 mm Screw
4,5 x 25 mm Screw
A
6
VA 5
18
46 x 8 mm Screw
of
R3,5 x 14mm Screw
S
Metalic slide the right field
4
10
24
12
12
8
8 x 50 mm Wooden Dowel
8 x 30 mm Wooden Dowel
Metalic angle plates
B3 Metalic bracket 4
Bore patch adhesive
Nail
Bushing
N
M
1
Cam Lock
Allen Key
3
I
H
Page
5 x 60 mm Screw
A3
P
Hardware List
O
Qty
Glue
3,5 x 14 mm Screw
Part
A2
4
21
B7
X4 Handle
46
5
6
12
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
** Materials for wall mounting are provided.
B5
F
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

J
J
Attach the hardware J Bottom of drawer front (15) using the a screwdriver (not provided). Insert
hardware parts E and F, Upper left right side (2) using small mallet (not provided).
E
J
09
J
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3:
J
15
E
(2x)
02
Step 1:
Page of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
(2x)
J
J
J
J
14
Step 2:
E
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
21
E
E
E
E
4 21
J
F
04
Attach the hardware J using the a screwdriver (not provided).
Insert hardware part E using small mallet (not provided).
Vendor: S000139
E