Happy Beds Shoreditch Bed User manual

Assembly Intruction
FABRIC STORAGE BED 135CM
SHO201
VERSION: 210518
O
O
O
O
Shoreditch Storage Bed
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

FLAT WASHER (12 PCS)
HARDWARE
PARTS
A
M8 x 25mm (12 PCS)
C
M6 x 30mm (6 PCS)
D
M6 x 15mm (12 PCS)
B
NUT (2 PCS)
E
M6 x 68mm (2 PCS)
FG
SPRING WASHER (12 PCS)
H
5mm ALLEN KEY (1 PC)
IJ
4mm ALLEN KEY (1 PC) SPANNER (1 PC)
03
2
3
4
1
6
5
13
14
15
7
11
10
8
9
12
O
OOO

Safety Advise
04
Please take the time to carefully read through the whole of
these instructions before you commence.
Keep these instructions for future reference.
Unpack, inspect and check off all of the contents.
Please dispose of all packaging safety.
Small component part could choke a child if swallowed.
We strongly recommend that you keep children well away
from the work area.
It would be sensible to lay a sheet or blanket on the oor
where you intend to work to avoid scratching this product
and to protect your oor.
This product is heavy. Take extreme care when lifting to
avoid personal injury or damage to the product.
Assemble the product as close to its intended nal position
in the room as possible.
We strongly urge that you do not use Power Tools, Such as
drills or electric screwdrivers during this assembly as this
could cause irreparable damage to your product and will
invalidate the warranty.
HANDY HINT: If you keep the hardware in a bowl during
assembly you will be less likely to lose them.

2
1
2
A
1
1
3
H
F
&
G
23
Attaching side rails to headboard.
Repeat step 1 for footboard.
Before tightening the bolts, please
ensure the bed frame is square.
05
OOOO

06
3
4
1
2
Fix corner brackets, then repeat for other 3 corner
brackets in each corner of the bed frame.
D
I
13
&
Fix holding block on back of footboard
I
E
2
9
10
OOOO

Before connecting the hydraulic arm, ensure the
07
5Secure hydraulic arms
DO NOT OVERTIGHTEN THE NUTS !
lifting mechanism is functioning correctly - it should lift
up and down freely with adequate clearance on all sides.
J
B
6Assemble the base
3
4
2
666
7
5
5
D
I
5
7
5
3&4
8
I
6
C
OOOO
O
O
O
O

08
7Attach non-woven fabric dust cover rst, then adjustable legs.
11
14
13
13
13
15
8Assemble slats
14
15
13
16
O
O
O
O

09
9
Attach belt to the metal frame by loop-on method as shown, pull
tight after loop-on.
12
10 Place the mattress onto the frame. (MATTRESS NOT INCLUDED)
Notes:
It is imperative that the bed is aligned squarely to prevent the
frame from catching on and damaging the upholstered side rails.
Please use extra caution when opening and closing the bed, ensure
a similar spacing on each side of the frame.
OOOO

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes