Happy Beds Enzo Wooden Gaming Desk User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
Enzo Wooden Gaming Desk

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

1
Shelf
1
Upper Left Side
1
of
1
15
Lower Left Side
13
1
2
1
16
Lower Backboard
Lower Division
1
1
1
1
03
18
11
11
14 Lower Right Side
Bottom Base
1
1
1
Box Qty
Upper Right Side
Top Base
12
17
Top
Top Backboard19
04
1
1
1
1
1
Part
Page
Parts List
Descripion
1
1
1
1
Vendor: S000139
11
12
14
13
04
03
16
17
18
15
19

O
N
8 x 30 mm Wooden Dowel
Structural Screw
F
Page
L
10 x 10 mm Tack
8 x 50 mm Wooden Dowel
Allen Key
Pass Wires
Descripion
J
Qty
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
M
E
Part
11
Smalll Plastic foot
4,5 x 45 mm Screw
Simple Minifix Screw
Structural Screw Cover
3 of
Hardware List
4,0 x 40 mm Screw
Cam Lock
Bore patch adhesive
Vendor: S000139
I
2
1
8
161514131211109876543210
A2
D
G
H
P6
6
20
4
16
16
10
10
6
4
2

Insert hardware part E using small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
11
Step 3:
Step 2:
Insert hardware parts E and F using small mallet (not provided).
Insert hardware part E using small mallet (not provided).
Step 1:
of 4
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page
Vendor: S000139
E
03
E
E
E11
E
E
E
04
E
E
E
E
E
12
E
17
F
F
E
EE
E
F
F
18
E

Insert hardware part E using small mallet (not provided).
16
Step 4:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page 11
15
5
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the hardware part J to the top base (15) and top (16) using the a screwdriver (not provided).
Step 5:
of
Vendor: S000139
14
E
E
13
J
J
J
J
J
J
J
JJ
J
E

DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
6
Page
Attach the upper left side (17) to the top backboard (19) using hardware part G, H and I.
11
Join the upper right side (18) to the assembled section using hardware part G, H and I.
of
Step 6:
Vendor: S000139
FGI
18
19
II
19
F
H
G
G
G
17
G
I

DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Join the top (16) to the assembled section using hardware part O and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
7
Step 8:
Join the top base (15) to the assembled section using hardware part L and a screwdriver. Insert the
hardware part M to the upper left side (17) and the upper right side (18).
Step 9:
ofPage 11
Vendor: S000139
O
L
L
M
M
L
15
17
18
O
O
O
17
16

13
11 Page
11
Step 10:
8
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the lower division (13) to the lower backboard (11) using hardware part G, H and I.
Join the top (16) to the top backboard (19) using hardware part D and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
of
Step 11:
I
D
D
Vendor: S000139
16
GI
G

04
Join the shelf (03) and bottom base (04) to the lower division (13) using hardware part G, H and I.
9
Step 12:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
03
13
Page of
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
14
03
Step 13:
11
Join the lower right side (14) to the shelf (03) and bottom base (04) using hardware part G, H and I.
04 G
G
I
I
Vendor: S000139
G
I
G
G
I
G
I
I
I
G

Page
12
Step 14:
Attach the lower left side (12) to the lower backboard (11) using hardware part G, H and I.
of
Join the top (16) to the lower left side (12), lower division (13) and lower right side (14) using hardware
part L and a screwdriver (not provided). Insert the hardware part M he lower left side (12), lower division (13)
and lower right side (14).
11
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
10 11
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 15:
L
12
I
Vendor: S000139
I
G
G
M
L
LM
16
13
14

If you have any issues with your item please contact the retailer directly you purchased it from
Insert hardware part P6 to the top base (15) and top backboard (19).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
of
Why don't you send us photos of your assembled furniture to [e-mail] to be shared in
Attach hardware part A2 to the o the lower left side (12), lower division (13) and lower right side (14)
using hardware part N and small mallet (not provided).
Step 16:
Page
our #birleahome feature on Instagram.
www.birlea.com
11 11
who will be able to resolve any issues with Birlea.
Step 17:
For complete product information, images and dimension diagrams please visit the website
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
N
N
12
Vendor: S000139
A2
N
N
A2
N
A2
N
A2
A2
A2
14
13
P6
P6
15

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floor, you must place some protection under the legs to stop the product
from moving. If this is not adhered to, it could result in failure to the product that will invalidate
the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes