Ercol Siena 4532 User manual

4532 Siena Medium Dining Table
Thank you for purchasing this Siena Dining table. Please read the instructions carefully before use to ensure
safe and satisfactory operation of this product.
Pre- assembly preparation
Please ensure instructions are read in full before attempting to assemble this product
This item is HEAVY
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the retailer from whom you purchased this
product.
This product is HEAVY, it should be assembled as near as possible to the point of use. TAKE CARE
WHEN LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 20 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG
CHILDREN.
Ref: 00237/4532

Left legs
Right legs
x 1
x 2
x 2
A
BLocking washer x 12
Flat washer x 12
C
E
F
G
Table top
Fittings and parts checklist
A
B
C
C
B
D45mm Bolt x 12
Allen key x 1

1. Assemble the left legs (B) and right legs (C) as shown below.
Step by step assembly instructions
.2
Fittings
D*12
E*1
F*12
G*12
G * 12
F * 12
D * 12
E
B
B
C
C
Two people may be required to carefully turn the table top face down onto a smooth soft surface
such as carpet. Put one set of legs to the table top and matching the holes, secure the bolts
and washers ( locking washer first) into the legs through the holes on the end rail of the table top.
When ALL bolts and washers are in place, hand tight. Repeat with the other set of legs.

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
Ercol Furniture Ltd, Summerleys Road, Princes Risborough, Buckinghamshire. HP27 9PX www.ercol.com
3. After assembling the legs, and with the aid of another person, carefully lift the table and turn it over.
Do not to turn the table over on two legs as this may cause damage.
Please take care as this table is very heavy.