Happy Beds URBAN Wooden 2 Door Wardrobe User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
URBAN Wooden 2 Door Wardrobe

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

2
Page of 7
Vendor: S000350
Parts List Hardware List ( BOX 2 )
Part Descripion Part Description Qty
01
02
03
04
05
08
07
07
06
09
09
10
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
** Note : To secure the item to the wall,
hardware P ( 2 pcs ) and
Q ( 2 pcs ) are not provided.
01 1
Top panel
02
03
04
05
06
07
08
09
10
Bottom panel
Middle panel
Door panel ( Left & Right )
Metal middle
1
1
1
1
2
1
2
2
2
Side panel ( Left )
Side panel ( Right )
Back bone
Back panel
Metal Side ( Left & Right )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I
J
L
M
N
O
P
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
7/8 Hinges
16
16
16
12
4
30
6
Handle 100.96. BLM
Allen key M4 1
2
Handle screw M4 x 19mm 4
JCBC screw M6 x 30mm 14
JCBC screw M6 x 40mm 4
Stud 192 8
8
Stud 192 screw
Drawer stopper ( 2 Pin ) 1
433 Oval tube bracket 2
433 Oval paip 1
M4 x 38mm C.B Screw -
8'' x 1'' PP tape 2
Wall plug -
A1
A3
Q
K1
K2
G
06
10
G
Qty
Box
1
1
2
2
2
2
2
2
1
1

3
Page of 7
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, D, E, L and M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
A2
A2
A2
A2
L
03
A2 A2
A2 A2 A2
A2 B
B
B
A1
A1
M
D
D
A2 A2
A2 A2
A2
A2
B
04
A1
A1
A1
A1
B
B
B
B05
07 X2
06 X2
D
D
E
05
07
07
03
A1
A1
A3
A2
Step 2: Attach the panel (5) and (7) to panel (3) using hardware A1 and A3 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
B
B
B
A1
A1
B

4
Page of 7
Vendor: S000350
Step 3: Insert the panel (8) along the slot.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach the panel (5) and (7) to panel (4) using hardware A1 and A3 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 5: Attach the panel (3) and (4) to panel (1) using hardware A1 and A3 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
05
07
07
03
08
05
07
07
03
08
04
A1
A1
A2
A2
A1 A3
08
07
07
03
05
04 01
A1
A2
A1
A3

5
Page of 7
Vendor: S000350
03
04
05 08
07
07
02
C
F
04
08
07
07
02
K1
K2
01
03
F
I04
08
07
07
02
10
10
10
Step 6: Attach the panel (2) to panel (3) and (4) using hardware C and F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach hardware K1 into panel (1), (2), (3) and (4) using hardware K2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 8: Attach the Metal Middle (10) to panel (2) using hardware I and F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.

6
Page of 7
Vendor: S000350
Step 9: Attach the Metal Side (9) to panel (3) and (4) using hardware I and F.
Attach the Metal Side (9) to Metal Middle (10) using hardware J and F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F
J
F
I
04
08
07
07
02
09
09
03
10 10 04
10
09
M
N03 04
02
05
01
H
G
G
06
09
Step 10: Attach hardware N into hardware M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 11: Fix hardware G onto panel (6) using hardware H with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
06

Page of 7
Vendor: S000350
7
04
01
06
06
03
05
ED
D
E
E
Vertical
Adjustment
Horizontal
Adjustment
Depth
Adjustment
Step 13: To secure the item to the wall use hardware O, P and Q using a screwdriver (not provided).
Then attach hardware part O to the panel (1) using hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
Q
O
P
1.
O
D
2.
Step 12: Attach panel (6) to panel (3) and (4) using hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this
product.

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the product across the
floor as this will cause damage to the joints. If the product is used on hard flooring, such as
wood or laminated floor, you must place some protection under the legs to stop the product
from moving. If this is not adhered to, it could result in failure to the product that will invalidate
the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes