Happy Beds Highgate Wooden 3 Door Wardrobe User manual

Title of Product
Assembly Instructions
www.happybeds.co.uk
Important before assembly:
.
Health & Safety:
.
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product, to avoid
scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
This product or some parts of this product will be heavy. Please use an assistant when lifting.
Please keep small parts out of reach of children.
Always use on a level, even surface.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep these instructions for future reference.
HIGHGATE Wooden 3 Door Wardrobe
HIGHGATE Wooden 3 Door Wardrobe

ASSEMBLY INSTRUCTIONS
HIGHGATE 3 DOOR WARDROBE
Page 1 of 8
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
YOUR HIGHGATE 3 DOOR WARDROBE .
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight - this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Vendor: S000398
www.birlea.com

@
This product or some parts of this product will be heavy. Please use an assistant
when lifting.
Never drag or push the pieces across a hard or stone floor as this will cause
damage to the joints. Use a carpet or a rug for extra care.
If you have problems assembling or have damaged or missing pieces, please
contact us by visiting:
https://www.happybeds.co.uk/customer-service
(Not metal)
These tools are not
necessary, but may
help to assemble
certain parts of the
product.
Do NOT use any power
tools as this may
damage the frame.

Page 2 of 8
** WARNING: THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PARTS LIST HARDWARE LIST: Carton 2 of 2
Part Description Qty Part Description Qty
ACAM NUT 15mm 31
BCAM BOLT 31
C WOOD DOWEL M6 x 25mm 48
D 4
ECSK SCREW M3.5 x 12mm 36
F 3
G6
H 6
J
KPVC NAIL 4
Carton 1 of 2:
2Left Panel 1
3 Right Panel 1
** You will need a screwdriver and a small mallet
( NOT provided)
9
12
13
14 CSK SCREW M4 x 25mm
15 1 1
40NAIL
Vendor: S000398
Fix Shelf Panel( small )
Top Post Panel
Left Post Panel
Right Post Panel
1
1
1
1
I
L
CSK SCREW M4 x 16mm
CSK SCREW M4 x 65mm
T/MS SCREW M4 x 22mm
TXM METAL BAR HANDLE 96mm 3
6
HINGES 7/8"
M
NOVAL BRACKET
OVAL PIPE (646mm) 2
1
Part Description Qty
1 Top Panel
1
5 Bottom Panel 1
6 1
7 1
8 1
10 Top Support Panel 1
Fix Shelf Panel
PARTS LIST
Carton 2 of 2:
1
2
12
7
8
10 14
49
11
5
15
6
18
17
3
13 16 16 16
17
18 1
2
Bottom Post Panel
17 Back Panel Back Panel
4Center Panel
Plinth Panel
Back Support Panel
16 3Door
11 Top Support Panel ( small ) 1
O CSK SCREW M4 x 45mm 2
WASHER (M4) 4
ANTI TIP STRAP 2
CSK SCREW M4 x 20mm 4
P
Q
R
S3 HINGES 2/8"

Page 3 of 8
1A31
B29
C48
4
Insert hardware part A & part B using a screwdriver (not provided).
Insert hardware part C using a small mallet (not provided).
Insert hardware part K using a small mallet (not provided).
Fix hardware I & S with screw E using screwdriver (not provided).
Fix hardware M with screw D using screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
K
4
D18
Vendor: S000398
I,S
E
E
K
K
12
13
16 x3
2
8
10 6
7
A
A
AA
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
CC
CC
CC
CC
CC
CC
CC
C
C
C
C
C
C
CC
C
C
D
D
M
M
I,S
EE
EE
EE
E6
I
M2
CC
CC
B
B
B
B
M
CC
BB
B
B
B
A
A
A
A
C
C
A
A
A
AAA
CC
CCCC
CC
A
AA
A
CC
A
AA
A
C
BB
C
C
3
415
14
1
5
9
11
C
I,S
I,S
S3

Page 4 of 8
CA
B
2
3
Vendor: S000398
CA
B
Attach the Post Panel together (12),(13),(14)&(15) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
14
15
13
12
8
7
4
5
Attach Bottom Panel (5) to Center Panel (4) Using Screw (F) by screwdriver (not provided).
Attach Fix Shelf Panel (11) and Back Support Panel (7) to Center Panel (4) by screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
O2
O
O

Page 5 of 8
4
5
Vendor: S000398
Attach Right Panel (3) to Bottom Panel (5), Fix Shelf Panel (small) (9) ,Plinth Panel (6)
and Top Support Panel (small) (11) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
CA
B
CA
B
Before attach Fix Shelf Panel (9) to Center Panel (4) Insert hardware
part (B) by screwdriver (not provided).
Attach Left Panel (2) to Bottom Panel (5), Fix Shelf Panel (8) ,Back Support Panel (7)
and Top Support Panel (10) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
B2
2
4
59
8
7
10
9
11
5
6
4
B
B
3

Page 6 of 8
6
7
Vendor: S000398
F
CA
B
G6Attach the Top Panel (1) to Left , Right Panel (2) , (3) and Center Panel (4) using
screw (G) By screwdriver (not provided).
Fix the Top panel (1) to Top Support Panel (10) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
14
12
13
15
2
5
3
1
FF
2
4
3
Attach ALL Post Panel (12) , (13) , (14) & (15) to Left , Right &
Bottom Panel (2) ,(3) & (5) by screwdriver (not provided).
Fix both Top Support Panel (8) to Top Post Panel (14) using screw (F) by screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F3
G
G
G
G
G
G

8
Page 7 of 8
9E18 Attach the Door (13) to Left , Right Panel (2) , (3) and Center Panel (4) with Hinges ( I )& (S)
using screw (E) by screwdriver (not provided).
Fix Handle (J) to Door (13) using screw (H) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
I,S
E
E
I
J
H
H6
J3
N1
N
Vendor: S000398
L
Attach The Back Panel (17) & (18) using Nail (K) by screwdriver
(not provided).
Fix Anti tip strap (P) with washer (O) and Screw (Q) To Top Panel (1) by screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
L40
17
17
18
13 13 13
I
I
S
S
S
I
I
I
H
H
HH
3
2
4
3
8
1
Q
RP
P
Q
R
2
2
2
L
Q
Q

10
Page 8 of 8
.Additional Information:
.For complete product information, images and dimension diagrams please visit the website www.birlea.com
.If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve any
issues with Birlea.
.Why don't you send us photos of your assembled furniture to [email protected] to be shared in our #birleahome feature on
lnstagram.
Vendor: S000398
Fix Anti tip strap (Q) with washer (P) and Screw (R) to wall by
screwdriver (not provided).
- Make sure it is firmly attached and make sure it is snug fit
- Seek advice from a qualified trade person on how to attach this safety strap to your specific
wall.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000398
R
P
P
R2 2
11

www.happybeds.co.uk
General Care & Maintenance
Please dispose of all packaging safely.
Wipe clean with a slightly damp cloth.
Avoid the use of all household cleaners and abrasives.
Periodically check all screw & fixings to ensure they are secure.
When moving your product, carefully lift into place. Never drag or push the pieces across the
floor as this will cause damage to the joints and could result in failure to the product that will
invalidate the warranty.
For more information on cleaning and product care visit:
https://www.happybeds.co.uk/help-and-advice
We’ve tried to make this product as easy to assemble as possible. In the unlikely event that
you have problems putting it together or have damaged or missing pieces, please contact
us by visiting:
https://www.happybeds.co.uk/customer-service
Notes