Harbor Mate FC-2021-BW User manual

Page 1Rev. 111120 1-888-651-3431
Beach Fishing Cart
Instructions for Part # FC-2021-BW
General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and prac-
tice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety
• Small parts are included. Please keep beach shing cart away from children while assembling.
• For the safe and proper performance of the cart, please check whether all the screws and nuts are
securely fastened and correctly installed before use.
• Please be careful with the sharp corners during assembly. We recommend wearing gloves to pre-
vent the undesired injury.

Page 2Rev. 111120 1-888-651-3431
Parts
Part Description Quantity
A Beach Fishing Cart 1
B Handle 1
C Holder-1 1
D Holder-2 1
E Wheel 2
F Axle 1
G U-Bolt 2
H Lock Nut M8 4
I Washer 2
J Split Pin 2
K D-Pin 3

Page 3Rev. 111120 1-888-651-3431
Assembly
Step 1: Install the axle
1. Prepare the main body, wheel axle, two U-bolts, and four
lock nuts.
2. Place the axle directly below the two holes at the bottom of
the main body.
3. The U-bolts pass through the holes from the bottom of the
axle upwards. Secure with lock nuts.
Step 2: Install the wheels
1. Before installing the wheels, rst place a washer on the axle.
2. Assemble the wheel.
3. Insert the split pin into the small hole on the top of the axle.
Step 3: Install the handle and holder-1
1. Insert the handle above the square hole on the front of the
main body and secure it with a D-pin.
2. Insert the holder-1 from below the square hole and secure it
with D-pin.
Step 4: Install the holder-2
Insert the holder-2 from below the square hole at the end of
main body and secure it with a D-pin.
Figure 1
Figure 2
Figure 3
Figure 4

Page 4Rev. 111120 1-888-651-3431
Product Warranty and Liability
GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer (original place
of purchase) or Merchant (“Dealer”) will be free of defects in material and workmanship at the time of
receipt, and will meet the specications stated at the place of purchase transaction or online at the
Dealer’s website, under normal use and service when correctly installed, operated and maintained.
This product warranty is effective for the period of time stated below, unless otherwise stated in the
product instructions or depicted in the product advertisement. All Authorized Dealer warranties are
NON-TRANSFERABLE and cover only the original end purchaser. This limited warranty does not
cover products purchased through non-authorized dealers. Non-authorized dealer receipts are not
accepted for warranty verication.
***Warranty claims must be made directly to the original place of purchase.***
WARRANTY PERIOD: This warranty remains in force for one year from the date of the product’s
accepted delivery. The Authorized Dealer offers a one year manufacturer’s warranty for most products
unless otherwise specied on the product advertisement.
WARRANTY SERVICE: The Authorized Dealer will replace any defective or malfunctioning part at
no charge, including payment of the shipping costs of parts or replacement product to and from the
manufacturer. The purchaser is responsible for labor charges. If the product does not meet specica-
tions as depicted in the advertisement, the Authorized Dealer will refund the full purchase price of the
product.
Questions regarding the warranty on a specic product and warranty claims should be directed to the
Authorized Dealer with whom the purchase transaction was made.
WARRANTY LIMITATIONS: The above warranty does not apply to products that are repaired, modi-
ed or altered by any party other than the Authorized Dealer; are subjected to unusual physical stress
or conditions (such as overloaded ramps or corrosion), natural disaster, governmental actions, wars,
strikes, labor disputes, riots, theft, vandalism, terrorism or any reason beyond reasonable control; are
damaged due to improper installation, misuse, abuse, accident or negligence in use, storage, trans-
portation or handling, or tampering; or to products that are considered consumable items or items
requiring repair or replacement due to normal wear and tear.
Product should be inspected prior to signing for delivery. Product damage incurred during shipping,
unless noted on the Bill of Lading at the time of delivery, renders this warranty void.
LIMITED LIABILITY: In no event shall THE AUTHORIZED DEALER be liable to the purchaser or any
third party for any indirect, incidental, consequential, special, exemplary or punitive damages arising
out of the use of the product, including, without limitation, property damage, loss of value of the prod-
uct or any third party products that are used in or with the product, or loss of use of the product or any
third party products that are used in or with the product.