Harman Infinity FUZE 200 User manual

FUZE 200
User Manual
Warning!
Warranty Card
PORTABLE BLUETOOTH SPEAKER

WELCOME TO HARMAN's FAMILY OF LEGENDARY BRANDS

Input: 5V/1A
What’s in the box
Connections
Buttons
1
2
3
QSG

2.0s
2.0s
2. Turn off the bluetooth speaker
1. Turn on the bluetooth speaker
Power on / Power off
4
EQ switching
5
This speaker comes with dual EQ to enter into various
personal preference, to swtich EQ, short press "+" and "－"
buttons to switch.

2.0s
2.0s
Bluetooth connection
6
Music
7
3. When turn on, the speaker will automatically connect to
the last connected device if available. If not, short press
the " " button to re-enter the pairing.
4. Clean up the pairing information by long press the " "
and " " buttons in the same time.
Choose ”Infinity FUZE 200” to connect
2. Connect to bluetooth device
<
Settings Bluetooth
Bluetooth
Infinity FUZE 200
DEVICES
Connected
Now Discoverable
1. The speaker will automatically enter into pairing mode
when power on and wait for the device to connect.

3.0s
x 1 x 1
x 2
Phone call
8
Voice assistant
9
Bluetooth mode, double press the " " button on the
speaker to activate Siri or Google Now on your phone. Please
make sure the Siri or Google Now is enabled on your phone.

Speaker A Speaker B
3.0s
Speaker A Speaker B
True wireless stereo pairing
10
2. Enable bluetooth on your device and connect to
"Infinity FUZE 200",stereo sound will play from both speakers.
1. Long press the " " button to enter into the true wireless
stereo pairing mode as a master speaker. If one of them fails,
clean up the pairing information.

Specifications
Bluetooth version: 4.2
Support: A2DP V1.2; GAVDP V1.3; AVRCP V1.6; HFP V1.7
Transducer: 2 x 45mm
Output power: 7.5W *2
Frequency response:75Hz - 20KHz
Signal-to-noise ratio: >70dB
Battery type: Lithium-ion polymer (3.7V, 2500mAh)
Battery charge time: 4 hour @ 5V 1A
Music playing time: up to 10 hours(50% volume level)
Bluetooth transmitter power: -6 ~ 4dBm
Bluetooth transmitter frequency range: 2.402 — 2.480GHz
Bluetooth transmitter modulation: GFSK, 1/4-DQPSK, 8DPSK
Dimensions: Φ88*116(mm)
Weight: 421g
12
LED Behavior
11
White
Fast flash
White
Slow flash
White
Flash
White
On
White
Fast flash
White
Fast flash
White
On
true wireless
stereo pairing
mode
true wireless
stereo
connected B
A
A
On
Stand by
Bluetooth
pairing mode
Bluetooth
connected
Dual speaker connect

Warning
13
IMPORTANT: To ensure that the FUZE 200 is waterproof,
please remove all cable connections and tightly close the
cap; exposing the FUZE 200 to liquids without doing so may
result in permanent damage to the speaker. And do not
expose FUZE 200 to water while charging, as doing so may
result in permanent damage to the speaker or power
source,IPX7 waterproof is dened as the speaker can be
immersed in water up to 1m for up to 30 minutes.
FUZE 200 is IPX7 waterproof.