Harman JBL IRX ONE User manual

QUICKSTART GUIDE
COLUMN SPEAKER WITH BLUETOOTH®
2. PLUG IN THE INPUTS
1. Turn the Main Level Knob (O) all the way to
the left before connecting any inputs.
2. Connect your devices to the Input Jacks (G, P).
1. POWER ON THE UNIT
1. Connect the power cord to the
Power Receptacle (H).
2. Press the Power Button [J] switch for .5
of a second to engage power.
IRX ONE_Artwork
Mixer Panel
Design: Yanyang Jia
Date: 2023-06-29
Units: mm
M 1:1
Only for QSG
IRX ONE_Artwork
Mixer Panel
Design: Yanyang Jia
Date: 2023-06-29
Units: mm
M 1:1
Only for QSG
IRX ONE_Artwork
Mixer Panel
Design: Yanyang Jia
Date: 2023-06-29
Units: mm
M 1:1
Only for QSG
A
LED Signal
Indicators
IBluetooth®
K
Automatic
Feedback
Suppression
P1/4” Line Input
MEQ Presets
JPower Button
NLimit
Indicator
OMain Level
LMusic Ducking
Q1/4” Mix Out
B
Gain
G
XLR-1/4”
Combo Inputs
H
Power
Receptacle
C
Phantom
Power 48 V
D
Treble Knob
E
Bass Knob
F
Channel
Levels

For complete documentation, visit
www.jblpro.com/irxone
JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 USA © 2023 Harman International Industries, Incorporated
IRXONE Quickstart Guide - 06/2023
Pour la version française de ce document, veuillez visiter le site www.jblpro.com/irxone
Die deutsche Version dieses Dokuments finden Sie unter www.jblpro.com/irxone
Para la versión en español de este documento, por favor visite www.jblpro.com/irxone
Para a versão em português deste documento, visite www.jblpro.com/irxone
Per la versione italiana di questo documento, visitare www.jblpro.com/irxone
이 문서의 한국어 버전은 www.jblpro.com/irxone 를 방문하십시오문하십시오
有關本文檔的中文版，請訪問 www.jblpro.com/irxone
4. PAIR AUDIO
This device supports Bluetooth audio
streaming.
To connect your device:
1. Turn on Bluetooth on your source device.
2. Hold the Bluetooth (I) button for 2
seconds. The LED will blink when the IRX
Speaker is in pairing mode.
3. Find the desired IRX speaker on your
device and select.
3. SET UP THE CHANNELS
1. Select a Preset using the EQ Preset
Knob (M).
2. Determine the CH1 - CH3 Gain (B]
source. For microphone set to 3 o’clock.
For line source set to 9 o’clock.
3. Adjust channel Levels (F) to achieved
desired mix
4. Slowly turn the Main Level Knob (O) to the
right until the desired volume is reached.
5. PLACE IN DESIRED LISTENING POSITION
Speaker Positions