Harris PRE99-1500-08 Operation manual

i
PRE99-1500-08 (Oasis-08)
PRE99-1500-08A (Oasis-08, Analog-only)
PRE99-1500-12 (Oasis-12)
PRE99-1500-12A (Oasis-12, Analog-only)
Installation
&
User Guide
Designs by Pacific Research & Engineering –PR&E®

2
TABLE OF CONTENTS
Safety & Hazard/Warning Labels .......................................................... 3
1 - Introducing Oasis ............................................................................... 4
Oasis Specifications .......................................................................... 6
Harris Warranty Statement ............................................................. 7
2 –Installation ......................................................................................... 10
Preparing the Countertop ................................................................ 10
Connecting the Wiring ...................................................................... 11
Console Power ................................................................................... 13
Configuration Switches .................................................................... 13
3 –Console Setup .................................................................................... 14
Default Configuration ...................................................................... 14
Oasis Control Center Application ................................................... 14
Installing the OCC App ..................................................................... 15
Using Oasis Control Center .............................................................. 15
4 - Use, Applications, and Options ........................................................ 20
5 - Service Information .......................................................................... 25

Safety Instructions Hazard and Warning
Label Identification
RISKOFELECTRICSHOCK
DONOT OPEN
C A UTION
WARNING: SHOCKHAZARD- DONOT OPEN
AVIS: RISQUEDECHOCELECTRIQUE- NEPASOUVRIR
CAUTION: TO REDUCE THERISKOFELECTRIC SHOCKDONOT
REMOVE ANYCOVER ORPANEL. NOUSER SERVICEABLE PARTS
INSIDE. REFER SERVICINGTO QUALIFIEDSERVICEPERSONNEL.
WARNING: TO REDUCE THERISKOFFIREORELECTRICSHOCK,
DONOT EXPOSE THEPRODUCTTO RAINORMOISTURE.
1. ReadAllInstructions.Readallsafetyandoperating
instructionsbeforeoperatingtheproduct.
2. RetainAllInstructions.Retainallsafetyandoperating
instructionsforfuturereference.
3. HeedAllWarnings.Youmustadheretoallwarningson
theproductandthoselistedintheoperatinginstructions.
4. FollowAllInstructions.Followalloperatingandproduct
usageinstructions.
5. Heat.Thisproductmustbesituatedawayfromanyheat
sourcessuchasradiators,heatregisters,stoves,orother
products(includingpoweramplifiers)thatproduceheat.
6. Ventilation.Slotsandopeningsintheproductareprovided
forventilation.Theyensurereliableoperationoftheproduct
andkeepitfromoverheating.Donotblockorcoverthese
openingsduringoperation.Donotplacethisproductintoa
rackunlessproperventilationisprovidedandthemanufac-
turer’srecommendedinstallationproceduresarefollowed.
7. WaterandMoisture.Donotusethisproductnearwater
suchasabathtub,washbowl,kitchensink,orlaundrytub,
inawetbasement,ornearaswimmingpoolorthelike.
8. Attachments. Donotuseanyattachmentsnot
recommendedbytheproductmanufacturerastheymay
causehazards.
9. PowerSources.Youmustoperatethisproductusingthe
typeofpowersourceindicatedonthemarkinglabeland
intheinstallationinstructions.Ifyouarenotsureofthe
typeofpowersuppliedtoyourfacility,consultyourlocal
powercompany.
10.GroundingandPolarization.Thisproductisequipped
withapolarizedACplugwithintegralsafetygroundpin.
Donotdefeatthesafetygroundinanymanner.
11.PowerCordProtection.Powersupplycordsmustbe
routedsothattheyarenotlikelytobewalkedonnor
pinchedbyitemsplaceduponoragainstthem.Pay
particularattentiontothecordsatACwallplugsand
conveniencereceptacles,andatthepointwherethe
cordplugsintotheproduct.
12.Lightning.Foraddedprotectionforthisproduct,unplugit
fromtheACwalloutletduringalightningstormorwhenit
isleftunattendedandunusedforlongperiodsoftime.This
willpreventdamagetotheproductduetolightningand
powerlinesurges.
13.Overloading.DonotoverloadACwalloutlets,extension
cords,orintegralconvenienceoutletsasthiscanresultin
afireorelectricshockhazard.
14.ObjectandLiquidEntry.Neverpushobjectsofanykind
intothisproductthroughopeningsastheymaytouch
dangerousvoltagepointsorshortoutparts,whichcould
resultinafireorelectricshock.Neverspillliquidofany
kindontheproduct.
15.Accessories.Donotplacethisproductonanunstable
cart,stand,tripod,bracket,ortable.Theproductmayfall,
causingseriousinjurytoachildoradultandserious
damagetotheproduct.Anymountingoftheproduct
mustfollowmanufacturer’sinstallationinstructions.
16.ProductandCartCombination.Movethisproductwith
care.Quickstops,excessiveforce,andunevensurfaces
maycausetheproductandthecartcombinationto
overturn.
17.Servicing.Referallservicingtoqualifiedservicing
personnel.
18.DamageRequiringService.Unplugthisproductfrom
thewallACoutletandreferservicingtoqualifiedservice
personnelunderthefollowingconditions:
a. WhentheACcordorplugisdamaged.
b. Ifliquidhasbeenspilledorobjectshavefalleninto
theproduct.
c. Iftheproducthasbeenexposedtorainorwater.
d. Iftheproductdoesnotoperatenormally(following
operatinginstructions).
e. Iftheproducthasbeendroppedordamagedinany
way.
f. Whentheproductexhibitsadistinctchangein
performance.Thisindicatesaneedforservice.
19.ReplacementParts.Whenreplacementpartsare
required,besuretheservicetechnicianhasused
replacementpartsspecifiedbythemanufacturerorthat
havethesamecharacteristicsastheoriginalparts.
Unauthorizedsubstitutionsmayresultinfire,electric
shock,orotherhazards.
20.SafetyCheck.Uponcompletionofanyrepairstothis
product,asktheservicetechniciantoperformsafety
checkstodeterminethattheproductisinproper
operatingcondition.
21.Cleaning.Donotuseliquidoraerosolcleaners.Useonly
adampclothforcleaning.
NOTE:TheVMFamilyofequipmenthasbeentestedandfoundtocomply
withthelimitsforaClassAdigitaldevice,pursuanttopart15oftheFCC
Rules.Theselimitsaredesignedtoprovidereasonableprotectionagainst
harmfulinterferencewhentheequipmentisoperatedinacommercial
environment.Thisequipmentgenerates,uses,andcanradiateradio
frequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructionmanual,maycauseharmfulinterferencetoradio
communications.Operationofthisequipmentinaresidentialareaislikely
tocauseharmfulinterferenceinwhichcasetheuserwillberequiredto
correcttheinterferenceathisownexpense.
TheExclamation Point symbol,withinanequilateral
triangle,alertstheusertothepresenceofimportant
operatingandmaintenance(servicing)instructionsin
productliteratureandinstructionmanuals.
TheLightningFlashWithArrowheadsymbol,within
anequilateraltriangle,alertstheusertothepresenceof
uninsulateddangerousvoltagewithintheproduct’s
enclosurethatmaybeofsufficientmagnitudeto
constituteariskofelectricshock.
3

4
1 –INTRODUCING OASIS
Oasis-08 Control Surface
Rear Cover Dual Meter Display Side Cover
Control Surface Palm Rest Option Panel
Oasis-08 Main Parts
T

5
Oasis Dual Display

6
Harris Corporation reserves the right to change specifications without notice
or obligation.







7
1. The Standard Equipment Warranty Period is 15 months from date of equipment shipment from
a Harris facility. The Customer’s sole and exclusive remedy for any breach of the Standard
Equipment Warranty will be, at Harris’ sole discretion and option, repair or replacement of the
defective Product. Components that Customer claims to be defective must be made available to
Harris for inspection and evaluation. Unless otherwise agreed in writing by Harris, Customs
clearance for all replacement parts under the warranty or otherwise will be Customer’s sole
responsibility. To be entitled to rights under the Standard Equipment Warranty, the Customer
must notify Harris in writing within thirty (30) days after discovering a suspected defect in any
Product or Services, but in any event prior to the expiration of the applicable Standard Warranty
Period. Notice to a Harris dealer, system integrator, sales representative or other third party is not
notice to Harris. Following its receipt of any such Customer notice, Harris will determine whether
the reported problem is covered by this Standard Equipment Warranty. If Harris determines that
the problem is covered, Harris will authorize repair or replacement of the defective Product, as
deemed appropriate by Harris in its sole discretion. For clarification purposes, any technical
support provided by Harris will be for the sole purpose of fulfilling Harris’ warranty obligations. If
Harris determines that Customer is using technical support as a substitute for training of
Customer’s personnel, then such technical support will be subject to additional charges at Harris’
prevailing unit rate for such services.
2. Before shipping any Product to Harris, the Customer must obtain a written Return
Authorization from Harris, and provide any proof of warranty eligibility requested by Harris. Any
Product received by Harris without a Return Authorization may, at Harris’ option, be returned to
the Customer collect. Once a Return Authorization is obtained, the Customer is responsible for
packing and shipping the Product, to which its warranty claim relates, to a service facility
designated by Harris, with all shipping charges prepaid by the Customer, within thirty (30) days
after receipt of the Return Authorization. Harris will pay for return of the repaired or replacement
Product to the Customer if the repaired or replacement Product is shipped to a designated Harris
service facility. Harris will use commercially reasonable efforts to supply Equipment (or part
thereof) from the geographical region of Customer’s site, so as to minimize freight and duty.
Harris bears the risk of loss or damage while the Equipment (or part thereof) is in transit to
Customer from the Harris Service Center, and Customer bears the risk of loss or damage while the
Equipment (or part thereof) is in transit back to the Harris Service Center.
3. Upon receipt of replacement Equipment (or a part thereof), Customer has thirty (30) days to
tender the defective Equipment (or part thereof) to the return carrier for shipment to the service
center designated by Harris. If Customer does not timely return the defective Equipment (or a
part thereof), Harris shall invoice Customer for the list price of such Equipment (or part thereof),
plus applicable shipping. Such failure to return the Equipment (or part thereof) may, in Harris’
discretion, be grounds for termination of the Warranty and/or suspension of any future advance
exchange privileges until such outstanding defective Equipment has been returned. Under the
Standard Equipment Warranty Harris will provide Customer with new, rebuilt, refurbished or
alternate Equipment (or a part thereof) of equal or improved quality, as the exchange Equipment
(or part thereof) to replace eligible defective Equipment (or part thereof). Any alternate
Equipment (or part thereof) will meet or exceed the specifications of the replaced Equipment (or
part thereof). Rebuilt or refurbished Equipment may bear cosmetic blemishes that do not affect

8
performance. Unless otherwise specified by Harris in writing, repaired or replaced Equipment (or
parts thereof) are covered only for the remainder of the term of the applicable Standard
Equipment Warranty. All defective Equipment (or parts thereof) replaced by Harris become the
property of Harris. Harris has no obligation to (i) service, exchange or otherwise replace any
Equipment (or part thereof) that has been damaged, modified, abused, misused or overused as
determined by Harris or has been used with non-Harris supplies or products that have caused
damage or malfunction; (ii) paint, refinish, refurbish, restore or exchange any Equipment (or part
thereof) with cosmetic blemishes; (iii) service, exchange or otherwise replace any Equipment (or
part thereof) if the same would interfere with, impede or be redundant with normal or scheduled
maintenance of such Equipment (or part thereof); (iv) service, exchange or otherwise replace any
Equipment (or part thereof) that is within sixty (60) days of the end of its production life; or (v)
provide any application software support or service involving application hardware or replace any
accessories. If Harris elects to perform any such services at Customer’s request, then such services
will be deemed a service call and all labor, parts and materials used for the service call will be
charged at Harris’ then-prevailing rates.
Harris does not warrant nor guarantee, and is not responsible for:
1. Defects, failures, damages or performance limitations caused in whole or in part by (A) power
failures, surges, fires, floods, snow, ice, lightning, excessive heat or cold, highly corrosive
environments, accidents, actions of third parties, or other events outside of Harris’ control, or (B)
Customer’s abuse, mishandling, misuse, negligence, improper storage, servicing or operation, or
unauthorized attempts to repair or alter the Equipment in any way. Customer must provide
qualified technical personnel to maintain and repair the Equipment.
2. Equipment built to Customer’s specifications that are later found not to meet Customer’s needs
or expectations.
3. The performance of the Equipment when used in combination with equipment not purchased,
specified, or approved by Harris.
4. Signal coverage delivered by antenna equipment whether or not supplied by Harris.
5. Batteries and other consumable goods.
1. OEM or Third Party equipment that is incorporated into Harris Equipment is covered under the
applicable Harris Standard Equipment Warranty unless the OEM or Third Party equipment carries
its own limited warranty, in which event the OEM or Third Party warranty will apply to such
equipment incorporated into Harris Equipment. For example and not limitation, CRTs, LCDs,
FSMs and Optical Test products are OEM products that have a limited 1 year manufacturer’s
warranty.
2. Items Sold As Resale. Items sold as resale are such items that are not manufactured by Harris
but may be utilized in conjunction with or independently of Harris manufactured Equipment
(such as tubes, printers and antenna transmission lines) and shall be covered only by the specific
warranty terms of the supplier or original equipment manufacturer of those items. IF AN ORDER
COVERS EQUIPMENT NOT OWNED BY HARRIS, IT IS SOLD SUBJECT TO HARRIS’
ACQUISITION OF POSSESSION.
3. B-Stock Equipment. B-Stock Equipment for non-transmitter related Equipment is defined as
any non-out-of-production product that is less than three (3) years old. B-Stock Equipment related
to transmitters is defined as equipment repurchased by Harris that is reconditioned or refurbished
for sale to a second generation owner by Harris or its reseller.
4. Used Equipment. IF THE EQUIPMENT SPECIFIED IN AN ORDER IS DESCRIBED AS USED,
UNLESS OTHERWISE AGREED IN WRITING BY THE PARTIES, IT IS SOLD “AS IS” AND WITH
NO WARRANTY.
Harris warrants that the Services will be performed in a professional manner (the “Services
Warranty”). Notice of a breach of the Services Warranty must (i) specify in reasonable detail, the
nature of the claim, and (ii) be received within ninety (90) days from the last day of performance
of the Services. Upon notice of a breach of the Services Warranty and Harris’ determination of the
validity of such breach of the Services Warranty, Harris will re-perform the applicable Services at
Harris’ expense. If after reasonable opportunity Harris is unable to re-perform such Services to the
reasonable satisfaction of Customer, Customer may, as its exclusive remedy, obtain a refund of the
fees paid to Harris under the applicable Order for such Services.
1. Physical Media. Harris warrants all physical media (“software media”) for the Licensed
Programs, including without limit custom software and traffic translators, to be free of defects in
material or workmanship for a period of ninety (90) days from the date of completed installation,
or if Customer should assume responsibility for installation of the Software, for a period of ninety
(90) days from the date of shipment of the Licensed Programs by Harris (the “Software Warranty
Period”). This limited warranty extends only to Customer as the original licensee. Customer’s sole
and exclusive remedy under this limited warranty will be, at Harris’ option, repair or replacement
of the software media.
2. Licensed Programs. Harris warrants that during the Software Warranty Period (or such other
time period as agreed in writing by the parties) the Licensed Programs shall operate substantially
in compliance with Harris’ specifications for the Licensed Programs (the “Software Warranty”).
The entire liability of Harris under this limited warranty is to provide, free of charge, a corrected
copy of any portion of the Licensed Programs which is found by Harris inspection not to be in
substantial compliance with its specifications. If Harris is unable to provide a corrected copy of the
Licensed Programs within a reasonable time, as Customer’s sole and exclusive remedy, Harris will
replace the same with a functionally similar program or refund to Customer the amounts
Customer paid Harris to purchase or license such Licensed Programs. Harris does not warrant
that such Programs are error free or that Customer will be able to operate such Programs without
problems or interruptions. Corrections to the Licensed Programs beyond the Software Warranty
Period will only be made by Harris pursuant to a separate software maintenance agreement.
3. Cost of Corrections. During the Software Warranty Period, Harris will bear the material cost
and shipment of corrected or replacement Software at no charge to Customer. Software
corrections will be sent via e-mail. In the rare event Customer requires a Harris customer support

9
engineer to visit the site, related reasonable pre-approved on-site time and travel expenses will be
billed at the prevailing daily rates, unless otherwise agreed to in writing prior to the visit. A ONE-
DAY MINIMUM CHARGE APPLIES TO ALL ON-SITE VISITS.
4. Software Warranty Exclusions. The Software Warranty does not apply to any software media or
Licensed Program that (A) has been altered or modified, except by Harris; (B) has not been
installed, operated, repaired, or maintained in accordance with instructions supplied by Harris;
(C) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident; or
(D) is used in ultra hazardous activities.
EXCEPT AS EXPRESSLY PROVIDED IN THIS STANDARD WARRANTY POLICY STATEMENT,
HARRIS HEREBY EXPRESSLY DISCLAIMS ALL REPRESENTATIONS, CONDITIONS AND
WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING BY WAY OF EXAMPLE AND
NOT LIMITATION, THE IMPLIED WARRANTIES OF TITLE, MERCHANTABILITY, NON-
INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, IN NO EVENT WILL HARRIS
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES
WHATSOEVER, INCLUDING LOSS OF PROFITS, WHETHER ARISING IN CONTRACT, TORT,
WARRANTY OR OTHERWISE, EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE LIMITATIONS SET FORTH HERE WILL APPLY EVEN IF THE REMEDIES OF
ERROR CORRECTION, REPAIR OR REPLACEMENT, REPERFORMANCE OF SERVICES AND
REFUND OF PAYMENTS COMPLETELY FAIL OF THEIR ESSENTIAL PURPOSE.
NOTWITHSTANDING ANYTHING HEREIN TO THE CONTRARY, THE LIMIT OF HARRIS’
LIABILITY (WHETHER IN CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY, BY STATUTE
OR OTHERWISE) TO CUSTOMER OR TO ANY THIRD PARTY CONCERNING THE HARRIS
EQUIPMENT OR SOFTWARE LICENSES SOLD TO CUSTOMER AND WARRANTED
HEREUNDER, HARRIS’ PERFORMANCE OR NONPERFORMANCE, OR IN ANY MANNER
RELATED TO THIS STANDARD WARRANTY POLICY STATEMENT, FOR ANY AND ALL
CLAIMS WILL NOT IN THE AGGREGATE EXCEED THE ACTUAL AMOUNTS RECEIVED BY
HARRIS FOR THE SPECIFIC PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE.
Applicable Law, Venue and Jurisdiction. This Standard Warranty Policy Statement, and any
disputes related hereto, shall be governed by and interpreted in accordance with the laws of the
State of Florida, USA, regardless of any law principles requiring the application of any other law.
The parties agree that the exclusive venue for any action related to the dispute or interpretation of
this Agreement shall be in the courts with the appropriate jurisdiction located in Orlando, Florida,
and each party irrevocably submits to the jurisdiction of each such court in any such action and
waives any objection it may now or hereafter have to venue or personal jurisdiction in each such
court. The prevailing party in any action related to the dispute or interpretation of this
Agreement shall be entitled to recover its reasonable attorneys fees incurred in pursuing the
action, including those fees incurred throughout all bankruptcy and appellate proceedings.
THE PARTIES FURTHER AGREE, TO THE EXTENT PERMITTED BY LAW, TO WAIVE ALL
RIGHTS TO A TRIAL BY JURY OF ANY ACTION RELATING TO THE DISPUTE OR
INTERPRETATION OF THIS AGREEMENT, WHETHER SOUNDING IN CONTRACT, TORT, OR
OTHERWISE. THE PARTIES SPECIFICALLY ACKNOWLEDGE THAT THIS WAIVER IS MADE
KNOWINGLY AND VOLUNTARILY AFTER AN ADEQUATE OPPORTUNITY TO NEGOTIATE
ITS TERMS.

10
2 - INSTALLATION
T

11
Combicon Plug
Wiring a Combicon Plug

12
Removing the Rear Cover

13
DC Power & USB Connections
Main Card, iButton socket

14
3 –CONSOLE SETUP
http://ecustomer.broadcast.harris.com/
ftp://ftp.pre.com
customer pacific
T

15
OCC app Icons
USB Host connection,
Main card

16
Inputs Tab

17

18

19

20
4 –USE, APPLICATIONS, AND OPTIONS
A=GUEST MIC
B=BACKUP CD