Hartmann Sterillium User manual

Dispenser Tower
500ml / 1L
01- General Features
02- Notes and package list
03- Bottle placement/exchange,
handling and maintenance

Dispenser Tower operating by stepping a foot pedal.
No need of hands contact.
Compact dimensions.
Mechanic operated. No power supply needed.
Adjustable to 500ml and 1L bottles.
All measurements in milimiters.
© Design property of Stand Art Display SL. Any total or partial reproduction is prohibited.
BACK DETAIL
Technical Specifications
DIMENSIONS
WEIGHT
Adjustable Piece
Main Body
10 Kg. (Disinfection not included).
- 475ml / 500ml bottle
Admisible measures for solutions dispensers:
MATERIAL
FINISHING
- 975ml / 1L bottle
- Colored Epoxy Resin.
Base
ELEMENT
Iron
MATERIAL
Iron
Iron
4 mm
THICKNESS
4 mm
1,2 mm
1015 mm 297 mm 297 mm
PACKAGE DIMENSIONS
10,4 Kg. (Disinfection not included).
PACKAGE WEIGHT
1100 mm 280 mm 280 mm
Height Lenght Width
Height Lenght Width
General Features
01
Dispenser Tower 500ml/1L

User Manual.
Notes:
- Please, read manual carefully before using the Dispenser Tower.
- Dispenser Tower can be used for children under adult supervision.
- Do not use the Dispenser Tower out-doors.
- This Dispenser Tower is suitable for BODE/HARTMANN 975ml/1L and 475ml/500ml bottles.
- It is the installer's responsibility to ensure placement of Dispenser Tower complies with applicable
codes, standards and regulatory requirements. Do not place this Dispenser Tower near sources of
ignition/flame.
02
Package include:
C
B
D
E
A
A
B
C
D
E
F
Dispenser Tower
Display with adhesive stripes
Foam inlay for Sterillium 975ml / 1000ml
Foam inlay for Sterillium 475ml / 500ml
Allen wrench
User Manual
Dispenser Tower 500ml/1L
F

User Manual.
03
MAINTENANCE:
Bottle Placement/Exchange:
HANDLING:
- It’s recommended to clean the Dispenser Tower surface with any of the following BODE products:
- Bacillol 30 Foam / Tissues.
- Mikrobac Tissues.
- Dismozon plus (0,4%).
- Mikrobac forte (0,5%).
- Place your hands under the pump nozzle and then press the foot pedal located at the bottom of the
Dispenser Tower. Rub in the hand disinfection for at least 30 seconds.
Knuled plastic
screw.
Adjustable
piece.
Anti-theft
device.
Foam inlay.
Display.
1 2 3
- Unscrew the knuled plastic screw placed on the back until the adjustable piece can be moved up
and down. Also unscrew the rounded metal screw placed below if it's needed. (Figure 1)
- Lift up the adjustable element and pass the bottle through the anti-theft device with the pump screwed
on. (Figure 2)
- Move down the adjustable piece with the bottle until the bottle is placed in the foam inlay (use the proper
foam inlay that fits with the size of the hand disinfection bottle). Place the adjustable piece on top of the
pump and lock the adjustable piece by screwing the knuled plastic screw (and rounded metal screw
placed below if it's needed for anti-theft protection). (Figure 3)
- The display can be attached to the adjustable piece by using the adhesive stripes.
++
Dispenser Tower 500ml/1L