Harvil BB125 User manual

ASSEMBLY INSTRUCTIONS BB125
1
The information contained in this manual is subject to change without notice.
We work around the clock and around the globe to ensure that Harvil products
maintain the highest possible quality. However, in the rare instance that your
product is defective or missing parts, contact your retailer to submit parts
requests or warranty claims. Please read the warranty information at the back
of these assembly instructions for further details.
IMPORTANT! PLEASE READ THESE ASSEMBLY INSTRUCTIONS
IN ENTIRETY BEFORE ASSEMBLING YOUR PRODUCT.
Thank you for your purchase of this Harvil product!
BB125
Double-Swish Electronic
Basketball Game

2
PARTS IDENTIFIER(NOT TO SCALE)
BB125
HOME VISITOR
TIME
910 11 12
13 14 15 16
2 3 4
Tube - 1
Φ32x595x440mm
Tube - 2
Φ32x690mm
Tube - 3
Φ32x860x220mm
Tubo - 3
Φ32x860x220mm
Tube - 4
Φ32x860x220mm Tubo - 4
Φ32x860x220mm
Tube - 7
Φ32x852mm
Tubo - 7
Φ32x852mm
Tube - 8
Φ32x795x255mm
Φ32x795x255mm Φ32x795x255mm
Tubo - 8
Φ32x795x255mm
Tube - 12
Φ32x550x390mm
Tubo - 12
Φ32x550x390mm
Tube - 9 Tubo - 9
Tubo - 2
Φ32x690mm
Tubo - 1
Φ32x595x440mm
Tube - 5
Φ32x710x550mm
Tubo - 5
Φ32x710x550mm
Tube - 6
Φ32x710x560mm
Tubo - 6
Φ32x710x560mm
Tube - 10
Φ32x700mm
Tubo - 10
Φ32x700mm
Φ32x1040x500mm Φ32x1040x500mm Φ13x1035mm Φ13x1035mm
Tube - 11
Φ32x710mm
Tubo - 11
Tube - 13 Tube - 14 Tubo - 14
Tubo - 13
Φ32x710mm
1
x2 x2 x1 x1
6 7 85
x1 x2 x1
x1 x2 x2 x2
x1 x2
x1
18 19 20
21
22 23 24
25
26 27 28
29
M3.5 x 10mm Bolt Perno
M3.5 X 10 mm
x4
Electronic Scorer
Face Plate
Placa Frontal
de Marcador
30
x1
Allen Key Llave Allen
x1
31
Wrench Llave Inglesa
32
x1
17
Paddle Sensor Sensor de Paleta Control Box Caja de Control
Con Cable
Electronic
Scorer
Marcador
Electrónico
x1
x2 x1
Rim Aro Rim Support
Plate
Placa Metálica de
Soporte de Rampa
x2
Air Pump Bomba de Aire
x1
Backboard Tablero de
Canasta
x1
M6 Washer Arandela M6
x64
M6 x 20mm Bolt Perno
M6 x 20mm
x16
M6 x 41mm Bolt Perno
M6 x 41mm
x6
M6 x 50mm Bolt Perno
M6x50mm
x4
M6 x 68mm Bolt Perno
M6x68mm
x4
M6 x 45mm Bolt Perno
M6 x 45mm
x2
M6 Nut Tuerca M6
x32
x2

3
PARTS IDENTIFIER(NOT TO SCALE)
BB125
PINCH HAZARD - USE WITH CAUTION WHEN FOLDING AND UNFOLDING THE GAME.
WARNINGS!
READ AND FOLLOW ALL ASSEMBLY, OPERATION AND SAFETY INSTRUCTIONS CAREFULLY.
CHOKE HAZARD - THIS TABLE CONTAINS SMALL PARTS -
NOT SUITABLE FOR CHILDREN UNDER 3 YEARS OF AGE.
PRE-INSTALLED PARTS
33
Ball Return Net Redes de Vuelta
de Pelota
x1
x6
34
Lock Pin Clavija de
Bloqueo
Spring Lock Cerradura de
Resorte
Plastic Pole
Insert
Encaje de Poste
Plástico
P1 P2
x13 x2
Nylon Net Red de Nylon
35
x2
P3
Pole Holder Soporte de Tubo
x6
x2
Basketball Baloncesto
7" Dia.
36
1. Find a clean, level surface to begin the assembly of your game. This is a very heavy game and assembly
will require at least two strong adults.
2. Remove all of the contents from the box and verify that you have all the parts shown on the Parts
Identier before you begin assembly. Note: Some parts may be pre-installed or pre-assembled.
3. Some gures or drawings may not look exactly like your product. Please read and understand the text
before beginning each assembly step.
4. When installing parts that have more than one screw or bolt, hand tighten all screws and bolts in place
before nishing with a screwdriver or hex wrench.
5. Electric screwdrivers may be helpful during assembly, however, please set a low torque and use extreme
caution because screws may be stripped or over tightened if the electric screwdriver’s torque is set
too high.

ASSEMBLY INSTRUCTIONS
4BB125
5
3
4
8
9
10
P1
P3
6
English
FIG.1 & 2
1. Begin by taking out tubes #10; make sure you have two tubes.
2. Attach tube #10 to tubes #3 and #4 via spring lock as shown in FIG 1.
3. Attach the other tube labeled #10 to tubes #8 and #9 via spring lock as shown in FIG. 2.
FIG.3
4. Next, attach tube #5 and tube #6 together using the spring lock as shown in FIG. 3.
X 1
X 1
FIG. 1 FIG. 2
FIG. 3
Spring Lock
5
6
P1
X 4
X 4
X 1
X 2
X 1
X 1
X 1
P1
X 1
3
4
10
8
9
10
Spring Lock
P1
Spring Lock
P1
P3
P3 P3
P3

ASSEMBLY INSTRUCTIONS
5BB125
22
26
28
English
FIG.4
5. Attach joined tubes #5 & #6 to joined tubes #3 & #4 using bolts (#26), washers (#22) and nuts (#28).
6. Then connect joined tubes #8 & #9 to joined tubes #5 & #6, using bolts (#26), washers (#22) and nuts (#28)
as shown in FIG. 4, 4A and 4B.
X 8
X 4
X 4
FIG. 4
FIG. 4B
FIG. 4A
5
3
10
4
9
6
10
8
22
28
26
26
22
28

ASSEMBLY INSTRUCTIONS
6BB125
22
24
28
7
2
2
7
4
10
9
6
10
8
5
3
English
FIG.5
7. Take out the tubes marked #7. Make sure you have two.
8. Attach one tube #7 to tube #8. Attach the other tube #7 to tube #9. Both are fastened via spring lock,
as shown in FIG. 5.
9. Next, take out the tubes marked #2. Make sure you have two.
10. Attach one tube #2 to tube #3. attach the other tube marked #2 to tube #4. Both as fastened via spring lock,
as shown in FIG. 5.
11. Attach both tubes #5 (joined with #8 & #9) to tubes #2 using bolts (#24), washers (#22) and nuts (#28)
as shown in FiG. 5A.
Note: Make sure the spring lock is face down.
T
FIG. 5
FIG. 5A
2
7
22
24
28
X 2
X 2
X 4
X 2
X 2

ASSEMBLY INSTRUCTIONS
7BB125
FIG. 6
FIG. 6A
FIG. 6B
English
FIG.6
12. Take out the tubes labeled #14. Make sure you have two. Attach one tube #14 to tube #12 using bolts (#24),
washers (#22) and nuts (#28) as shown in FIG. 6A. Then insert tubes labeled #1 to tube #2 as shown in FIG. 6.
13. Take out the tubes labeled #11. Make sure you have two. Attach both tubes to both ends of joined #5 & #6
using bolts (#27), washers (#22) and nuts (#28) as shown in FIG. 6 and 6B.
11
14
22
24
28
X 2
X 1
X 8
X 2
27
X 2
X 4
P2
X 2
1
1
2
2
3
4
10
10
89
5
6
7
7
11
11
14
22
24
28
22
28
27
P2
P2
14

ASSEMBLY INSTRUCTIONS
8BB125
11
11
5
6
10
10
89
7
7
14
3
4
2
2
1
1
12
12
12
English
FIG.7
14. Attach the tubes labeled #12 to tubes #11 using the spring lock as shown in Fig. 7.
15. You’ve now completed assembling the main frame of the Harvil Double-Swish Electronic Basketball Game.
X 2
FIG. 7

ASSEMBLY INSTRUCTIONS
9BB125
FIG. 8
15
17
18
21
22
23
28
English
FIG.8
16. The next step will guide you in setting up the game’s backboard. First, attach the rims (#17) and the rim
support plates to the main body of the backboard (#21) using bolts (#23), washers (#22) and nuts (#28).
Then attach the paddle sensors (#15) to the backboard (#21) using bolts (#23), washers (#22) and nuts (#28).
Make sure that you use washers on both sides of the backboard as shown in FIG. 8.
X 2
X 2
X 2
X 1
X 32
X 16
X 16
FIG. 9
20
29
30
X 1
X 4
X 1
HOME VISITOR
TIME
ABC
TIME
VISITOR
HOME
29
20
30
35
X 2
28
15
15
17
17
22
22
23
23
28
22
22
18
18
21
FIG. 9
17. Attach the Electronic Scorer Face Plate (#30) to the front of the backboard and connect the Electronic
Scorer (#20) using bolts (#29) as shown in FIG. 9.
18. Install the net (#35) to the rim (#17) as shown in FIG. 9A, 9B, and 9C.

ASSEMBLY INSTRUCTIONS
10BB125
22
24
28
34
English
FIG.10
19. You’re now ready to put the basketball return net over your frame. To start, slide the elastic straps and the
sleeve of the Ball Return Net (#34) onto the top tubes (#1) as shown in FIG. 10A & 10B.
21. Attach tube #14 to tube #13 using bolts (#24), washers (#22) and nuts (#28) as shown in FIG.10C.
Make sure to attach the tube over the net cloth.
FIG. 10
FIG. 10C
FIG. 10A
24
22
14
22
28
14
FIG. 10B
13
X 4
X 2
X 2
X 1
X 1
13
134
34
14

ASSEMBLY INSTRUCTIONS
11BB125
English
FIG.11
22. With the help of another adult, attach the Backboard (#21) to the top tubes (#1) using bolts (#25), washers
(#22), nuts (#28) and end caps (#20) as shown in FIG. 11A. At each bottom hole of the backboard, attach
the ramp tabs of the Ball Return Net (#34) using bolts (#25), washers (#22), nuts (#28) as shown in FIG. 11B.
23. Look for the 2 Lock Pins (#36) included in your package. Each lock pin consists of a metal bar with spring
lock mechanism and key-ring attached by a chain. To set it up, secure the key ring to a side hole (found
on tube #5) and then insert your lock pin in the middle hole. Do the same for the other side (tube #6)
as shown in FIG. 11C.
FIG. 11
X 8
X 4
X 4
22
25
28
X 2
36
FIG. 11A
FIG. 11B
FIG. 11C
36
25 22 2
22 28
34
1
21
25 22
22
28
1
34
21
14

ASSEMBLY INSTRUCTIONS
12BB125
English
FIG.13
26. Fig. 13 explains how the scoring, sensor wires and control wires would connect to work. First, connect
the sensor wire from the Paddle Sensor (#15) to the Electronic Scorer (#20) as shown in FIG. 13 and 13A.
Then, connect the Control Wire to the Electronic Scorer (#20) as shown in FIG. 13 and 13A. The electronic
scorer operates using 3 AA batteries. Once the batteries are installed, you’re good to go! Please go
to page 14 for further instructions on the electronic scorer and control box.
FIG. 12
24. Attach the control box (#16) to the middle of tube #13 as shown in FIG. 12A.
25. Pass the control wire through the loops on the Ball Return Net (#34) as shown also in FIG. 12A.
X1
16
FIG. 12
Control Wire
FIG. 13
FIG. 13A
ON / OFF
CONTROL
WIRE
Sensor wire
Sensor wire
Electronic Scorer
Control Wire
20
13
16
Control Wire
FIG. 12A
VISITOR

ASSEMBLY INSTRUCTIONS
13BB125
FIG. 13
English
IMPORTANT!
Make sure to use the
Lock Pin (#36) when folded.
FIG.14
27. Fig. 14 shows the game’s folding position when not in use. Insert the Lock Pin (#34) as shown in FIG. 14.
Note: The Lock Pin (#36) needs to be removed from its original position when the game is being used before
insertion to the new position when folded.
You have now assembled your Harvil Double-Swish Electronic Basketball Game. Please not the Care and Use
Instructions below to ensure years of trouble-free use.
Lock Pin
36
36
CARE AND USE
1. This product is intended for INDOOR use only.
2. Do NOT sit, climb or lean on the basketball game.
3. Remove the batteries if the game won’t be used for a long time.

ELECTRONIC SCORER OPERATION
14BB125

GAME OPTIONS AND INSTRUCTIONS
15BB125

GAME OPTIONS AND INSTRUCTIONS
16BB125

GAME OPTIONS AND INSTRUCTIONS
17BB125

18
90 DAY LIMITED WARRANTY
90-DAY LIMITED WARRANTY
BB125
This Harvil product is warranted to the original purchaser to be free from defects in material or
workmanship for a period of 90 days from the date of the original retail purchase.
This warranty does not cover defects or damage due to improper installation, alteration, accident or
any other event beyond the control of the manufacturer. Defects or damage resulting from
misuse , abuse or negligence will void this warranty. This warranty does not cover scratching or
damage that may result from normal usage.
This product is not intended for institutional or commercial use; Harvil does not assume any liability
for such use. Institutional or commercial use will void this warranty.
This warranty is nontransferable and is expressly limited to the repair or replacement of the
defective product. During the warranty period, Harvil shall repair or replace defective parts at no
cost to the purchaser. Shipping charges and insurance are not covered and are the responsibility of
the purchaser. Labor charges and related expenses for removal, installation or replacement of the
product or components are not covered under this warranty.
Harvil reserves the right to make substitutions to warranty claims if parts are unavailable or obsolete.
Harvil shall not be liable for loss of use of the product or other consequential or incidental costs,
expenses or damages incurred by the consumer of any other use. The user assumes all risk of injury
resulting from the use of this product.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of
any of its representatives assumes any other liability in connection with this product.
All warranty claims must be made through the retailer where the product was originally
purchased. A purchase receipt or other proof of date of purchase will be required to
process all warranty claims. The model number and part numbers found within the
assembly instructions will be required when submitting any parts requests or warranty
claims.
For further warranty information or inquiries, please call 877-800-2299