Hatteland X Series User manual

HD 12T21 MMC-xxx-xxxx - 12.1 inch Maritime Multi Computer
HD 15T21 MMC-xxx-xxxx - 15.0 inch Maritime Multi Computer
HD 17T21 MxC-xxx-xxxx - 17.0 inch Maritime Multi Computer
HD 19T21 MxC-xxx-xxxx - 19.0 inch Maritime Multi Computer
HD 24T21 MxC-xxx-xxxx - 24.0 inch Maritime Multi Computer
HD 26T21 MxC-xxx-xxxx - 25.54 inch Maritime Multi Computer
(MxC, where x is either; M=Standard (MMC), E=ECDIS Calibrated (MEC))
Series X - Maritime Multi Computer (MMC) Models
USER MANUAL
Please visit www.hatteland-display.com for the latest electronic version of this manual.
User Manual MMC Series X
Updated: 06 Oct 2017 Doc Id: INB100485-1 (Rev 24)
Created: 363
Approved: 6542
Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway
Tel: [phone] - [e-mail] - www.hatteland-display.com
Released

Copyright © 2017 Hatteland Display AS
Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway.
All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be
copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS. Review also:
www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.pdf
The products described, or referenced, herein are copyrighted to the respective owners.
The products may not be copied or duplicated in any way. This documentation contains proprietary
information that is not to be disclosed to persons outside the user’s company without prior written consent
of Hatteland Display AS.
The copyright notice appearing above is included to provide statutory protection in the event of
unauthorized or unintentional public disclosure.
All other product names or trademarks are properties of their respective owners !
WARNING: This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Last revised 6 Jan 2015
Released

3
IND100130-40
Contents.......................................................................................... 3
Contents of package............................................................................................................... 6
General ............................................................................................ 7
About this manual................................................................................................................... 8
About Hatteland Display ......................................................................................................... 8
www.hatteland-display.com .................................................................................................... 8
Contact Information ................................................................................................................ 8
Maritime Multi Computer (MMC) - Introduction ...................................................................... 9
Touch screen products ......................................................................................................... 10
Product Labeling................................................................................................................... 12
Installation..................................................................................... 17
General Installation Recommendations................................................................................ 18
First Things First!.................................................................................................................. 18
Installation and mounting...................................................................................................... 18
Installation limitations ........................................................................................................... 19
Ergonomics........................................................................................................................... 21
Cables .................................................................................................................................. 21
Cable Entries & Connectors (Marked area) ........................................................... 21
Maximum Cable Length ......................................................................................... 22
Housing / Terminal Block Connector Overview .................................................................... 23
Panel / Console Mounting Bracket Kit for 12”, 15”, 17” and 19” ........................................... 25
Panel Cutout / Console Mounting Bracket Kit for 24” ........................................................... 26
Panel Cutout / Console Mounting Bracket Kit for 26 inch..................................................... 27
Mounting Bracket, Table / Desktop / Ceiling - 12”,15”,17”,19”.............................................. 28
Important to know about LEFT and RIGHT brackets............................................................ 29
Installation Procedure - TMB Versions ................................................................................. 30
Mounting Bracket for Table / Desktop installation - 24”, 26” and 27”.................................... 33
Physical Connections ........................................................................................................... 35
Operation....................................................................................... 39
User Controls........................................................................................................................ 40
Contents
Released

Contents
4
IND100130-40
Specications ............................................................................... 43
Specications - HD 12T21 MMC-xxx-xxxx ........................................................................... 44
Specications - HD 15T21 MMC-xxx-xxxx ........................................................................... 45
Specications - HD 17T21 MxC-xxx-xxxx ............................................................................ 46
Specications - HD 19T21 MxC-xxx-xxxx ............................................................................ 47
Specications - HD 24T21 MxC-xxx-xxxx ............................................................................ 48
Specications - HD 26T21 MxC-xxx-xxxx ............................................................................ 49
Specications - CAN Module with CO-Processor................................................................. 50
ZIA0001310-B........................................................................................................ 50
Specications - NMEA / IEC COM Module RS-422 / RS-485 .............................................. 51
PCA100293-1 ........................................................................................................ 51
Specications - COM Module RS-232.................................................................................. 54
PCA100294-1 ........................................................................................................ 54
Specications - Isolated Digital Input/Output Module........................................................... 55
PCA100297-1 ........................................................................................................ 55
Specications - LAN Module ................................................................................................ 57
PCA100298-1 ........................................................................................................ 57
Specications Accessories ......................................................... 59
Specications - JH C01MF A-A ............................................................................................ 60
Specications - External Modules (USB).............................................................................. 61
Technical Drawings ...................................................................... 63
Technical Drawings - HD 12T21 MMC-xxx-xxxx .................................................................. 64
Technical Drawings - HD 15T21 MMC-xxx-xxxx .................................................................. 65
Technical Drawings - HD 17T21 MxC-xxx-xxxx.................................................................... 66
Technical Drawings - HD 19T21 MxC-xxx-xxxx.................................................................... 67
Technical Drawings - HD 24T21 MxC-xxx-xxxx.................................................................... 68
Technical Drawings - HD 26T21 MxC-xxx-xxxx.................................................................... 69
Technical Drawings - Accessories.............................................. 71
Technical Drawings - HD CMB SX1-A2................................................................................ 72
Console Mount Kit 12”,15”,17”,19”......................................................................... 72
Technical Drawings - HD CMB SX1-A3................................................................................ 73
Console Mount Kit 12”,15”,17”,19”......................................................................... 73
Technical Drawings - HD CMB SX1-B1................................................................................ 74
Console Mount Kit 24” ........................................................................................... 74
Console Mounting 24”............................................................................................ 75
P006801-1 Flush Mounting 24”.............................................................................. 76
Released

Contents
5
IND100130-40
Technical Drawings - HD CMB SX1-C1................................................................................ 77
Console Mount Kit 26” ........................................................................................... 77
Console Mounting 26”............................................................................................ 78
P007084-1 Flush Mounting 26”.............................................................................. 79
Technical Drawings - External Modules (USB)..................................................................... 80
Technical Drawings - HD VED SX1-A1 ................................................................................ 81
VESA Bracket 12”,15”,17”,19”,24”,26” ................................................................... 81
Technical Drawings - JH 15TAP STD-C1 ............................................................................. 82
15 inch Series X to t 15 inch Series 1 Cutout....................................................... 82
Technical Drawings - JH 19TAP STD-C1 ............................................................................. 83
19 inch Series X to t 19 inch Series 1 Cutout....................................................... 83
Technical Drawings - JH 26TAP STD-A1.............................................................................. 84
26 inch Series X to t 26 inch Series 1 Cutout....................................................... 84
Technical Drawings - HD TMB SX1-A1 ................................................................................ 85
Desktop/Table Mounting Bracket 12”/15”............................................................... 85
Technical Drawings - HD TMB SX1-B1 ................................................................................ 87
Desktop/Table Mounting Bracket 17”/19”............................................................... 87
Technical Drawings - HD TMB SX1-C1 ................................................................................ 89
Desktop/Table Mounting Bracket 24/26/27 inch..................................................... 89
Technical Drawings - HD 15COV SX1-A1 ............................................................................ 90
Series X - 15 inch UV Sun Cover .......................................................................... 90
Technical Drawings - HD 17COV SX1-A1 ............................................................................ 91
Series X - 17 inch UV Sun Cover .......................................................................... 91
Technical Drawings - HD 19COV SX1-A1 ............................................................................ 92
Series X - 19 inch UV Sun Cover .......................................................................... 92
Technical Drawings - HD 24COV SX1-A1 ............................................................................ 93
Series X - 24 inch UV Sun Cover .......................................................................... 93
Technical Drawings - HD 26COV SX1-A1 ............................................................................ 94
Series X - 26 inch UV Sun Cover .......................................................................... 94
Appendixes ................................................................................... 95
SSD Selection Guide............................................................................................................ 96
Pinout Assignments ............................................................................................................ 100
Basic Trouble-shooting ....................................................................................................... 103
Declaration of Conformity ................................................................................................... 104
Return Of Goods Information ............................................................................................. 105
General Terms and Conditions ........................................................................................... 106
Pixel Defect Policy.............................................................................................................. 107
Notes .................................................................................................................................. 108
Revision History...................................................................................................................110
Released

6
IND100131-25
Contents of package
Item Description Illustration
FS-CABLE EU
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
EUR TYPE F
IEC
80099
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
US TYPE B IEC
MEDIA STD01
Documentation and Driver DVD for factory installed components like mainboard, IDE, network
etc. It also includes the Touch Screen driver for units delivered with a factory mounted touch
screen. For most recent drivers, please visit “www.hatteland-display.com/archive”.
Note: To use this DVD disc you will need an external USB CD/DVD drive or provide means of
getting contents copied over via USB memory stick/network to MMC unit. In some cases (due
to revisions) a provisonal CD (PRO02-xxx) may be delivered with the unit instead.
Menu browser for
Microsoft®
Windows®
Operating Systems
Recovery Image
(located on hidden partition on SSD)
Note: Only applicable for factory delivered units with SSD hardware.
Test Reports (3 x A4 papers):
1 x Display/MMC Checklist
1 x Product Declaration
1 x BurnInTest Certificate (signed)
HD CMB SX1-A1 or
HD CMB SX1-A2
Model Dependent:
4 pcs of Key Hole Mounting Brackets for Console/Panel Mounting,
Anodized Aluminium/Stainless Steel.
The bracket kit is suitable for 12, 15, 17 and 19 inch units and is EN60945 Tested.
Note: Either -A1 or -A2 version may be delivered during Q4-2014 to Q3-2015
Reference: http://www.hatteland-display.com/mails/02_2015_ecn.html
A1: Suitable for panel thickness 3.0 [0.12] to max: 12.00 [0.47] mm [inch]
A2: Suitable for panel thickness 1.0 [0.04] to max: 12.75 [0.50] mm [inch]
HD CMB SX1-B1 or
HD CMB SX1-C1
Model dependent:
Bracket Kit suitable for console/panel mounting which contains:
3 x Mounting Bracket for top, left and right side
1 x Mounting Bracket for bottom side (terminal/connector plate area)
8 x M5x16 screws
8 x C-Washers
HD CMB SX1-B1 = Suitable only for 24 inch units and is EN60945 Tested.
HD CMB SX1-C1 = Suitable only for 26 inch units and is EN60945 Tested.
Terminal Block Connector Kit
Terminal Block Connector Kit as follows (may in some cases be already factory mounted):
1 x 2-pin Terminal Block 5.08 (Phoenix 1961986) for DC Power In
Refer to “Conguring Housing / Terminal Block Connector” section for usage.
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Item Description Illustration
Terminal Block Connector Kit
Depending on factory mounted options, Terminal Bracket Connector kit as follows:
4 x 5-pin Terminal Block 3.81 for RS-422 / RS-485 NMEA COM (PCA100293-1)
4 x 4-pin Terminal Block 3.81 for CAN Interface (ZIA0001310-B)
4 x 4-pin Terminal Block 3.81 Digital Input/Output (PCA100297-1)
Note: Location of module(s) may
differ between unit sizes
For High Bright / Sunlight Readable models (17-24 inch) an EPDM sealing gasket for IP66
console mount is factory pre-mounted / included with delivery.
Details / Type number reference:
Surface: RAL9011, Glue: 3M9471LE, Thickness 2mm.
P007130-1 (17), P007131-1 (19), P007032-1 (24)
Package may also include: (based on accessories/options ordered)
Released

7
General
Released

8
Hatteland Display AS
IND100077-1
General
About this manual
The manual contains electrical, mechanical and input/output signal specications. All specications in this manual,
due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update
and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of
the manual.
Furthermore, for third party datasheet and user manuals, please see dedicated Documentation and Driver DVD
delivered with the product or contact our sales/technical/helpdesk personnel for support.
About Hatteland Display
Hatteland Display is the leading technology provider of specialized display and computer products, delivering high
quality, unique and customized solutions to the international maritime, naval and industrial markets.
The company represents innovation and quality to the system integrators world wide. Effective quality assurance and
investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil
tested products. Our customer oriented approach, technical knowledge and dedication to R&D, makes us a trusted
and preferred supplier of approved solutions, which are backed up by a strong service network.
www.hatteland-display.com
You will nd our website full of useful information to help you make an informed choice as to the right product for your
needs. You will nd detailed product descriptions and specications for the entire range on Displays, Computers and
Panel Computers, Military solutions as well as the range of supporting accessories. The site carries a wealth of
information regarding our product testing and approvals in addition to company contact information for our various
ofces around the world, the global service centers and the technical help desk, all ensuring the best possible
support wherever you, or your vessel, may be in the world.
Contact Information
Head ofce, Vats / Norway:
Hatteland Display AS
Stokkastrandvegen 87B
N-5578 Nedre Vats, Norway
Tel: [phone]
[e-mail]
Sales ofce, Frankfurt / Germany:
Hatteland Display GmbH
Werner Heisenberg Strasse 12,
D-63263 Neu-Isenburg, Germany
Tel: [phone]
Fax: [phone]
Sales ofce, Oslo / Norway:
Strandveien 35
N-1366 Lysaker
Norway
Tel: [phone]
Sales ofce, Aix-en-Provence / France:
Hatteland Display SAS
ACTIMART, 1140 RUE AMPERE, BP 50 196
13795 AIX-EN-PROVENCE, CEDEX 3
France
Tel: [phone]
Fax: [phone]
Sales ofce, Vista / USA:
Hatteland Display Inc
380 South Melrose Drive,
Suite 349
Vista, CA 92081
USA
Tel: [phone]
Fax: [phone]
For an up-2-date list, please visit www.hatteland-display.com/locations
Released

9
Panel Computers Series X
IND101057-8
General
Maritime Multi Computer (MMC) - Introduction
As a leading manufacturer of display and computer hardware for the maritime
segment, Hatteland Display continuously gauges and responds to market
needs. Our commitment to develop specialized products for a multitude of
onboard ship systems continues, and with that the introduction now of a
brand new product range called, Series X.
With cast aluminium, compact and sleek by design chassis, the units
from this new range can be desk mount or console integrated. The design
is modular, allowing for common modules to be used in various models and
combinations. Together these design features bring about a range perfectly
in synch to market cost expectations - along with that, the performance and
type approval always expected in all Hatteland Display products.
The modules used in Series X, are all qualified having undergone and passed our extensive test program, which
includes HALT testing. This means that the products are tested well outside the requirements in EN60945 and E10.
The result is a more reliable product.
The Series X MMC range of products has been developed alongside the display versions, thus expanding the
impressive footprint and impact of this Series X on the maritime market.
The considerable advances made by Hatteland Display over recent years in PC platform development is now
enhancing further the panel PC offering. All Series X display sizes are available with state of the art PC technology
integrated, designed and built for type approved maritime systems.
A computer and display, all in one...
- MULTITOUCH
- Type Approved
- ECDIS Compliant
- IP22 rear / IP66 front
- Superior Bonding Technology
- Module based, tailor-made systems made easy!
- Sunlight Readable / High Bright versions available
- GLASS DISPLAY CONTROL™ (GDC), Solid State Menu System
Released

10
IND100110-12
Touchscreen
Introduction to products with touch screen
Nearly all of our Series X products with touch screen uses Projected Capacitive Touch screen (PCTS), widely used with
great success on mobile phones and typical pad devices. PCTS can be equally effective also for marine applications.
One of the advantages of PCTS is that it has features seen in both resistive and surface capacitive touch screen
technologies.
Multitouch is dened as the ability to recognize two or more simultaneous touch points. Using projected capacitive
technology lets us create a more intuitive form of human-device interaction. Touch interface gestures, supported by
projected capacitive sensors, can simplify the interface and provide an intuitive user experience that goes beyond the
typical "button replacement" found in most simple touch interfaces.
Please review the appropriate Product Data Sheet (in this manual) to determine if PCTS are supported.
The technical benets of PCT are:
- Very good optical performance (same as surface capacitive)
- Environmentally strong, the touch sensor is inside the product (better than both surface capacitive and resistive)
- Supports Multitouch (Newer Operating System (OS) required in most cases.
- Excellent readability - light transmission of up to 91% through a standard sensor
- Stability - no drift, therefore no recalibration is required
- Pointing device - works with gloved and ungloved finger
- Resistance to contamination - by harsh cleaning fluids and other noxious substances
- Communicates via USB to external computer or internally
Comparisons between general Touch Technologies used by Hatteland Display:
Technology Optical Performance Stable Calibration Gloves Water Durability Price Multitouch
Analog Resisitive -- +++ ++ -++ -
Surface Capacitive ++ --- - + - -
Projected Capacitive ++ ++ + + *++ +++
*Projected Capacitive (PCTS) / Water: Touch Screen Glass Surface can withstand drip and direct rain, but expect reduced capability, detection and
performance if unit are exposed to these factors while powered. Hatteland Display recommends to protect the unit from direct rain or drips if critical
touch operations are to be performed. Take nessessary steps (if detected or suspected) within the installation environment to prevent accidental touch
gestures or presses not performed intentionally by a human operator.
Touch screen products
Released

11
Touch screen
IND100110-13
Touch Screen Drivers and Documentation
All units are shipped with a Documentation and Drivers DVD or CD which
contains suitable drivers*for touch screens. (Named MEDIA STD01).
You can also visit our website www.hatteland-display.com/archive to view the same
list (or even recently new added products) for our models with touch screen.
Before using the touch screen, it should be calibrated for your system.
Please install the 3rd party software*and use the Calibrate function.
For additional touch controller/screen documentation and updated drivers*, please
visit the 3rd party manufacturer website as found in the Touch Screen Wizard menu.
*General Note:
Newer Operating Systems (OS), from year 2011 and above, does not specically require additional 3rd party drivers in order to operate the touch
screen and support “Multitouch”. For example; Microsoft® Windows® 7 and above comes with default factory installed Windows HID drivers fully
supporting “Multitouch”. You may choose to install 3rd party drivers for example during trouble-shooting situations or to review features of the 3rd
party software. Hatteland Display suggests that you should use factory default Microsoft® Windows® 7 HID touch drivers in any case possible.
For older Operating Systems (like Microsoft® Windows® XP and older), before year 2011, the OS does not not support “Multitouch” technology and
the touch screen will just operate as a ordinary single-point touch screen. Additionally to get touch screen working at all in older OS, you need to
install 3rd party drivers.
Note that the lack of “Multitouch” support is not dependent on hardware or software/rmware for the controller specically, but rather dependent on
important core functions in the Operating System which are outside control of the 3rd party software.
Summary
Microsoft® Windows® 7 / Microsoft® Windows® 8 / Microsoft® Windows® 8.1 / Microsoft® Windows® 10 IoT
- All HD xxT21 / T22 / MVD units:
- Please use Windows® Generic HID driver, no specic driver needed to use multi-touch.
Microsoft® Windows® 7 32 bit only
- HD 07T22 / HD 13T22 units:
- Please use Windows® Generic HID driver, no specic driver needed to use multi-touch.
Linux (openSUSE® 11.4, Fedora™ 15, Ubuntu® 10.04 LTS, Ubuntu® 12.04 LTS)
- All units:
- Please use Linux Generic Touch driver.
Note: Kernel before 2.6.38: Single touch support.
Note: Kernel above 2.6.38: Multi touch support.
*32bit only available for HD 07T22 / HD 13T22 units. Other units, 32/64 bit supported.
------------------------------------------------- Note: Windows® XP is End Of Life ----------------------------------------------------------
Reference: http://www.hatteland-display.com/mails/09_2016_eol.html
Microsoft® Windows® XP
- 24 and 26 inch HD xx21 units:
- Please use Touch Screen Driver Wizard and install PCT Touch Utility, example PtouchUtility-1.0.0.4-150326.exe.
Reference August 2015: http://www.hatteland-display.com/mails/21_2015_ecn.html
Microsoft® Windows® XP
- 8, 12, 13, 15, 17 and 19 inch HD xxT21 units:
- Please use Touch Screen Driver Wizard and install eGalaxTouch Drivers (XPE_5.11.0.9223).
------------------------------------------------- Note: Windows® XP is End Of Life ----------------------------------------------------------
Touch screen products
Released

12
IND100077-110
Product Labeling
Introduction
This section details the locations, content details and specications for factory mounted labels for all currently
available standard Hatteland Display Panel Computer (MMC) models. This information will in most cases also apply
for most Customized Models as well, but may differ based on customer requirements, in that case, please refer to the
customized User Manual (paper or electronic version, dependent on customer requirements).
Label Size and Types
ID Label Layout Description Specication
Please note that typenumber shown
above is a generic sample only. May
not reect products mentioned in this
manual. Please review actual product
S/N label.
Type : Serial Number Label
Name : Label B
Size : 60mm wide x 22mm high (rectangle size)
Note: Text content of label will match specications
derived from Data Sheet.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Barcode type: CODE128 (used extensively world wide in shipping and packaging
industries. The symbology was formerly dened as ISO/IEC 15417:2007.)
Type : Operating System (OS) label.
Microsoft® Windows® Embedded Enterprise only.
Size : 70mm wide x 28mm high (rectangle size)
Note: Label only present if OS was part of factory
option order. Linux OS does not have any label.
As per delivered from supplier.
Type : Touch Screen Label
Name : Label B
Size : 60mm wide x 22mm high (rectangle size)
Note: Only present if Touch Screen was part of factory
option order.
Silver with glue on back, non-
tearable and made for thermal
transfer printing.
Note: Content on label will vary based on Touch Screen type and/or Touch Screen
Controller. Label shown to the right is for illustration purposes only!
Type : Warranty Label
Size : 30mm wide x 23mm high (oval size)
Tampering proof sticker with glue
on back.
Type : Quality Control (QC) Label
Size : 30mm wide x 23mm high (oval size)
Ordinary sticker with glue on
back.
Released

13
Product Labeling
IND100077-110
Label Locations
Number ID and coloring based on “Label Size and Types“ table from previous page. All illustrations below is seen
from rear (and side where needed) with connectors facing down. Actual labels regarding its size and text orientation
vs product size is drawn in. Due to space restrictions on selected units, some labels will be rotated 90 degrees to t
properly. The arrangement of labels may be shifted/stacked differently as it is based on factory options, such as; Touch
Screen and Operating System (OS), but they will be grouped together where possible.
Label Positions Notes Applies for Product Range
Warranty label covers screw.
Labels placed on rear.
HD 12T21 MMC-xxx-xxxx
Warranty label covers screw.
Labels placed on rear.
HD 15T21 MMC-xxx-xxxx
Warranty label covers screw.
Labels placed on rear.
HD 17T21 MxC-xxx-xxxx
Released

14
Product Labeling
IND100077-110
Warranty label covers screw.
Labels placed on rear.
HD 19T21 MxC-xxx-xxxx
Warranty label covers screw.
Labels placed on rear.
HD 24T21 MxC-xxx-xxxx
Warranty label covers screw.
Labels placed on rear.
HD 26T21 MxC-xxx-xxxx
Released

15
Product Labeling
IND100077-135
Serial Number Label Layout (example)
Manufactured Date yyyymmdd
Product Size and Type
Input Voltages & Power Rating
Manufacturer and Country
Barcode (TYP+SNO)
Warranty Label
If you are to perform service on a unit still under warranty, any warranty will be void if this label show signs of removal
attempts (re-gluing) or removed completely. This label is located on the back of the product and covers a key screw.
This is to aid service departments to determine if there has been any unauthorized service on a unit still under
warranty.
Quality Control (QC) Label
This label indicates that the unit is produced, tested and packed according to manufacturer’s QA specications. It will
include a Personal ID and signature by the personnell responsible for approving the unit in production, test and
warehouse departments.
Please note that typenumber shown above is a generic sample only. May not reect products mentioned in this
manual. Please review actual product S/N label.
Released

16
This page left intentionally blank
Released

17
Installation
Released

18
Installation
IND100078-29
General Installation Recommendations
First Things First!
Applies for non-bonded product only: If exposed to humidity
in combination with temperature variations, product might
show condensation on the glass (inside and outside).
Inside condensation can be removed by power on the
product and set brightness to 100%. Within minutes the
internal temperature rise will remove condensation.
Humidity Exposure Notice!
ATTENTION!
IND100148-5 - Rev 04
To prevent damage to
chassis and glass, please
review the illustrations ! Place horizontally on a smooth and clean surface (table with cloth) Do not stress the corners, nor place it on a coarse and/or dirty surface
CORRECT HANDLING! WRONG HANDLING! CORRECT HANDLING! WRONG HANDLING!
Applies for non-bonded product only: If exposed to humidity
in combination with temperature variations, product might
show condensation on the glass (inside and outside).
Inside condensation can be removed by power on the
product and set brightness to 100%. Within minutes the
internal temperature rise will remove condensation.
Humidity Exposure Notice!
ATTENTION!
IND100148-5 - Rev 04
To prevent damage to
chassis and glass, please
review the illustrations ! Place horizontally on a smooth and clean surface (table with cloth) Do not stress the corners, nor place it on a coarse and/or dirty surface
CORRECT HANDLING! WRONG HANDLING! CORRECT HANDLING! WRONG HANDLING!
Applies for non-bonded product only: If exposed to humidity
in combination with temperature variations, product might
show condensation on the glass (inside and outside).
Inside condensation can be removed by power on the
product and set brightness to 100%. Within minutes the
internal temperature rise will remove condensation.
Humidity Exposure Notice!
ATTENTION!
IND100148-5 - Rev 04
To prevent damage to
chassis and glass, please
review the illustrations ! Place horizontally on a smooth and clean surface (table with cloth) Do not stress the corners, nor place it on a coarse and/or dirty surface
CORRECT HANDLING! WRONG HANDLING! CORRECT HANDLING! WRONG HANDLING!
Installation and mounting
1. Most of our products are intended for various methods of installation or mounting (panel mounting, bracket
mounting, ceiling/wall, console mounting etc.); for details, please see the relevant mechanical drawings.
2. Adequate ventilation is a necessary prerequisite for the life of the product. The air inlet and outlet openings must
denitely be kept clear; coverings which restrict ventilation are not permissible.
3. Generally, do not install the unit in a horizontal position (laying down), as this will cause heat to build up inside the
unit which will damage the LCD Panel. To prevent this problem we recommend installing the unit in a vertical
position (±30 degrees) to improve the airow through the unit.
4. To further improve the thermal situation we recommend to use forced air passing by the product. In some cases,
convection based cooling can create “heat zones” around the product. This may be required in high temperature
applications and also when there is reason to expect temperature problems due to non-optimal way of mounting.
5. Exposure to extreme direct sunlight can cause a considerable increase in the temperature of the unit, and might
under certain circumstances lead to overtemperature. This point should already be taken into consideration when
the bridge equipment is being planned (sun shades, distance from the windows, ventilation, etc.)
6. Space necessary for ventilation, for cable inlets, for the operating procedures and for maintenance, must be
provided.
7. If the push buttons of the product are not illuminated, an external, dimmable illumination (IEC 60945 Ed. 4, 4.2.2.3,
e.g. Goose neck light) is required for navigational use. The illumination shall be dazzle-free and adjustable to
extinction.
8. Information about necessary pull-relievers for cables is indicated in the Physical Connection section of this manual.
Attention must be paid to this information so that cable breaks will not occur, e.g. during service work.
Released

19
General Installation Recommendations
Installation
IND100078-29
9. Do not paint the product. The surface treatment inuences on the excess heat transfer. Painting, labels or other
surface treatments that differ from the factory default, might cause overheating.
10. Expose to heavy vibration and acoustic noise might under certain circumstances affect functionality and expected
lifetime. This must be considered during system assembly and installation. Mounting position must carefully be
selected to avoid any exposure of amplied vibration.
Installation limitations
Due to environmental factors, please review the points noted below.
A: Overheat prevention:
For Maritime Multi Computer (MMC, Panel Computers) it is advised that you do not mount the unit in a
vertical angle lower than ±30 degrees, as noted in point 3 (previous section), i.e. at mounting of the unit.
This is to prevent both overheating the unit as well as ensure proper cooling airow to sustain long-life and
stable operation. Panel Computer units generate more heat than regular Display units naturally because of
CPU and mainboard chips.
It should be noted that 24” and 26” MMC units have internal fans providing additional cooling airow of
their own, whilst smaller units (typically 8” to 19”) has no internal fans. In such cases, the ±30 vertical angle
may in certain situations allow for lower angle mounting provided that the console casing has adequate
cooling (see point D), however this is suggested as a trouble-shooting tip during installation or during short-
term observer use if found suitable. It should not be considered as a dentive trusted solution.
B: Glass Display Control™ (GDC) front glass touch buttons:
As this uses Projected Capacitive technology (instead of conventional hard physical buttons and knobs),
the touch controller can react and are sensitive to raindrops (for outdoor installations). To ensure that
raindrops do not stay on the unit’s at glass surface, please do not mount the unit in a vertical angle lower
than ±30 degrees, i.e. at mounting of the unit. This is to prevent accidental touches that are similar to a
human nger (cover area for a x period of seconds) as well as make sure the raindrops are “moving” and
slides down off the glass surface.
For Maritime Multi Display (MMD) and Industrial Standard Display (STD) units (not available for Panel
Computers (MMC) units), the angle could potentionally be lower as the On Screen Display (OSD) menu offers
a "OSD Key utdoor" function with 5 seconds delay before activation on front glass functions. Please review
the "OSD Menu Functions" to learn more. In certain situations this might help, but is only suggested as a
trouble-shooting tip during installation or during short-term observer use if found suitable. It should not be
considered as a dentive trusted solution.
C: Projected Capacitive Technology (PCTouch) MULTITOUCH and in general Touch Screen glass:
For all units with a factory mounted touch screen and for outdoor use especially, please review point B above
regarding staying raindrops. Only solution to this situation is not to mount the unit in a vertical angle lower
than ±30 degrees, i.e. at mounting of the unit to ensure touch screen is not activated and accidentally
automatically chooses functions in your running chart, radar or other software installed.
D: General rule for console mounted units:
To ensure proper cooling airow, long-life and stable operation for all units, please make sure that the
console casing have either fans or decent ventilation holes to prevent overheating inside the console due to
the combined temperature of both Display or Panel Computer units together with other electronic instruments.
A general rule is to make sure the console casing is capable of expelling “worst case scenario” in respect of
the “Max Power Consumption” of all devices installed. Please review also point 2, 5, 6 and 9 (previous
section) for additional information and installation tips.
Note that 24” and 26” Panel Computer units have their own internal fans. See point A for more information.
Released

20
General Installation Recommendations
Installation
IND100078-29
General mounting instructions
1. The useful life of the components of all Electronics Units generally decreases with increasing ambient temperature;
it is therefore advisable to install such units in air-conditioned rooms. If there are no such facilities these rooms
must at least be dry, adequately ventilated and kept at a suitable temperature in order to prevent the formation of
condensation inside the display unit.
2. With most Electronic Units, cooling takes place via the surface of the casing. The cooling must not be impaired by
partial covering of the unit or by installation of the unit in a conned cabinet.
3. In the area of the wheel house, the distance of each electronics unit from the magnetic standard compass or the
magnetic steering compass must not be less than the permitted magnetic protection distance. This distance is
measured from the centre of the magnetic system of the compass to the nearest point on the corresponding unit
concerned.
4. Units which are to be used on the bridge wing must be installed inside the “wing control console” protected against
the weather. In order to avoid misting of the viewing screen, a 25 ... 50 W console-heating (power depending on the
volume) is recommended.
5. When selecting the site of a display unit, the maximum cable lengths have to be considered.
6. When a product is being installed, the surface base or bulkhead must be checked to ensure that it is at in order to
avoid twisting of the unit when the xing screws are tightened, because such twisting would impair mechanical
functions. Any unevenness should be compensated for by means of spacing-washers.
7. This Product shall be grounded to protective Earth. For AC Power cables this is done through the ground wire in the
connector, for DC input the ground bolt shall be used. A shorter and thicker cable gives better grounding. A 6mm²
is recommended, but a 4mm² or even 2.5mm² can be used for this purpose
8. Transportation damage, even if apparently insignicant at rst glance, must immediately be examined and be
reported to the freight carrier. The moment of setting-to-work of the equipment is too late, not only for reporting the
damage but also for the supply of replacements.
9. The classication is only valid for approved mounting brackets provided by Hatteland Display. The unit shall be
mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of mounting
might require test and re-classication.
Released