Hawk BVP25D User manual

Side Mount
3-Speed Switch and
Dual GFCI Power Outlets
900 CFM Air Mover
Dry Floors, Circulate and Exhaust Air
Hawk BVP25D User’s Manual Hawk BVP25D User’s Manual
Daisy Chain up to
5 Units for Extra Air
Moving Power
HAWK HAWK
ENTERPRISES ENTERPRISES
Works in Tight Spaces for
Tough Drying Jobs
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
Subject to Change Without Noce
Specificaons
Model BVP25D
Motor 1/4 HP, 115V, 60Hz with 10 . 14 AWG Cord Aached
Air Volume 900 CFM (High), 700 CFM (Med), 690 CFM (Low Speed)
Amp Draw 2.1 Amp (High), 1.8 Amp (Med), 1.7 Amp (Low Speed)
Air Flow Direcons 0, 45 and 90 degrees
Max Stac Pressure 1.3ʺ
Chassis Construcon Sturdy Rotomolded Plasc
Stackable in Storage 5 units
Daisy Chain Yes - Up to 5 Units
Weight 11.3 lbs. (net) / 12.6 lbs. (gross)
Size (LxWxH) 12.8” x 12.4” x 13.3”
Sound Level 67 dB
Cerficaon C-ETL-US
Air Flow in 3 Angles
0, 45 & 90 Degrees
12.8” 12.4”
13.3”
Hawk Limited Warranty
Hawk Enterprises Inc. equipment has been manufactured, tested and inspected with carefully
engineered requirements. Hawk warrants each new machine, part and accessory to be free of
defects in materials and workmanship for a me specified in the table below. Repair or replacement
of defecve parts or service must be conducted by a Hawk authorized service provider.
Warranty Start Date: Warranty coverage starts on the date the machine is installed at the end user's
site, or six months from the ship date from the factory, whichever comes first. The distributor who
sold you the machine is responsible for compleng the registraon form at
www. hawkenterprises.com/service_registraon. This forms idenfies the machine and records
warranty state date.
Warranty Coverage - Hawk Air Movers
Motor and Gearbox - 1 year
Non-Wear Items - 6 months
Repair Parts - 90 days
Service Labor - 6 months
Excepons and Exclusions from the Limited Warranty
This warranty does not cover repairs resulng from accident, abuse, misuse, damage in transit, or
lack of proper maintenance. Equipment must be used with electric current noted on the data plate.
Damages from operaon at other voltages or currents will void the warranty.
Certain normal wear parts are consumed in use of this machine, and are not covered by this
warranty. These parts include, but are not limited too, cords, switches, bumpers, bearings, isolators,
carbon motor brushes, compensators, brushes, pad drivers, bulbs, bags, v-belts and filters. No other
warranes extend beyond the terms of this Hawk Limited Warranty, including implied warranty of
merchantability or fitness of this machine for a parcular use.
How to Set Up Warranty Repair
Equipment must be repaired by a Hawk approved service provider; the dealer who sold the new
equipment or any Hawk distributor service department in the US. Repairs or alteraons made by
anyone other than the Hawk factory or a cerfied repair staon, will void the warranty.
The distributor who sold you the machine is responsible for registraon of the machine with the
factory. With this registraon, Hawk will have all of the records required for warranty claim,
including records of ownership, date of delivery and resulng warranty dates and terms,
distributor's locaon, machine model, type and serial number. To find the closest service provider,
contact Hawk Customer Service at 1-574-294-1910 or [e-mail].
Warranty claims must be submied within 30 days of service request.
Replacement
In the event of a malfuncon resulng in a warranty claim, Hawk, may at its sole opon, replace the
equipment or warranted part with another new part of equal quality instead of repairing that part.
No Refund of Purchase Price
Hawk will not, as a maer of this warranty agreement, refund the end user's purchase price.

Unpacking & Checking Of Contents
Unpack your BVP25D carefully and inspect if all parts are intact. If any of the parts are
missing damaged, please contact Hawk Customer Service at [phone] or e-mail to
[e-mail].
Operang Instrucons
This BVP25D requires NO ASSEMBLY. The unit is packaged and ready to be put to work.
The unit is intended to be used for drying carpet spills, drying surfaces such as bathroom
floors, venlang as well as circulang air.
1. Place the unit on the surface that needs to be dried.
2. Plug the unit into a grounded outlet .
3. Select the desired speed and posion
Floors and Carpet Maintenance
WARNING: As with all electrical equipment, the unit must be
disconnected from power before servicing or cleaning.
ŸBefore each use, inspect the unit for damage, blocked inlets and exhaust and for
foreign material buildup.
ŸWhen the air mover is turned on, inspect the unit for excessive vibraon. In the event
of excessive vibraon or if the fan wheel rubs against the rotomolded housing,
immediately turn off the unit and have a cerfied technician inspect the unit.
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
ATTENTION!
Read all safety rules carefully before aempng to operate the
BVP25D. Please retain this manual for future reference.
NEVER operate this unit when flammable materials or vapors
are present -- electrical devices produce arcs or sparks which
may cause a fire or an explosion.
NEVER operate this unit unaended.
WARNING!
To reduce the risk of fire, electric shock or injury, follow the
direcons below:
ŸDo not use an extension cord with this air
mover.
ŸDo not use with solid state speed control
device.
ŸDo not allow to be used as a toy. Close
aenon is necessary when used by or near
children.
ŸDo not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
ŸDo not use with damaged cord, plug or
other parts.
ŸCall customer service if your air mover is not
working as it should, has missing parts, has
been dropped, damaged, le outdoors or
dropped into water.
ŸDo not pull or carry by cord, use cord as
handle, close a door on cord, or pull cord
around sharp edges or corners. Keep cord
away from heated surfaces.
ŸDo not run cord under carpeng. Do not
cover cord with throw rugs, runners or
ŸUse product only as described in this
manual.
ŸTo reduce the risk of electric shock, do not
expose to rain, immerse in or use in standing
water. Store indoors only.
ŸUse only with GFCI-protected outlets.
ŸWhen storing or transporng, do not stack
air movers more than 5 units high.
ŸElectrical appliances can ignite flammable
vapors or dust. Do not use near combusble
liquids, gases or dusts.
ŸDo not leave plugged into outlet when not in
use or when servicing. Turn off before
unplugging.
ŸTo reduce the risk of srring up and inhaling
toxic vapors, do not use near toxic or
hazardous materials.
ŸNever operate with safety grills removed.
ŸThis unit has an automacally-operated
protecve device which may shut down the
unit during operaon. Unplug before
servicing or cleaning.
WARNING!
ŸTo reduce the risk of electric shock, connect only to a GFCI
protected outlet. Do not expose to water
CAUTION
ŸThis air mover has an automac motor shutoff device. It
may restart without noce.
ŸTo reduce the risk of injury, unplug before servicing.
WARNING!
ŸDo not use an extension cord with this fan. To reduce the
risk of p-over during storage or transport, stack up to 5
units high only.
32
BVP25D
0 degrees
BVP25D
45 degrees
BVP25D
90 degrees
HAWK HAWK
ENTERPRISES ENTERPRISES Hawk BVP25D User’s ManualHawk BVP25D User’s Manual

Motor Specificaons & Electrical Requirements
This BVP25D has a 1/4 HP, 3-speed, 115-volt, 60 Hz inducon motor with a grounding
conductor. Thermally protected, it will automacally shut down if overheated. The motor
will restart automacally once cooled, for as long as it is plugged into a power source.
In the event of a malfuncon or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.
This air mover is equipped with an 10 . 14 AWG electric power cord having an equipment
grounding conductor and a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance with all local codes and
ordinances. Do not modify the plug provided. If it will not fit the outlet, have the proper
outlet installed by a qualified electrician.
Power Cords
ŸUse three-pronged adapters that are UL and CE approved and with Ground Fault
Circuit Interrupter (G.F.C.I.).
ŸDo not use cords that show any kind of wear or damage.
ŸCords are not covered by warranty
WARNING! The Total amperage of the BVP25D Air Mover plus all other
devices plugged into the receptacle must not exceed 12 amps.
Grounding Instrucons
The BVP25D must be grounded. Should it malfuncon, grounding provides a path of least
resistance for electric current and reduces the risk of electric shock. This appliance is
equipped with a cord that has an equipment-grounding conductor and a grounding plug.
The plug must be inserted into a properly installed and grounded outlet, in accordance
with all local
WARNING!
Improper
connecon of the
equipment-
grounding
conductor can
result in the risk of
an electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug provided with the appliance. If plug
does not fit the outlet, have a proper outlet installed by a qualified electrician.
NOTE: In Canada, the use of a temporary adapter is not permied by the Canadian
Electrical Code
Use with 115V
3-Prong Grounded
Connection
DO NOT
Use with a 3-Prong to
2-Prong Adapter
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com 54
Lubricaon
NO LUBRICATION IS NECESSARY. The motor is equipped with lifeme lubricated bearings.
Storage & Transportaon
1. Before storing your air mover, it should be cleaned.
2. Wrap the power cord around the carry handle on top of the unit to keep it untangled.
3. If you have more than one unit, store units by stacking. Do not stack more than 5 units
high.
4. Never operate unit while on its side or while stacked.
5. THE BVP50 SHOULD BE STORED INDOORS.
CAUTION:
Do not operate this air mover stacked on top of each other. Do not stack
more than 5 units high for storage.
Servicing
In order to receive service or replacement parts under warranty, you must:
1. Call [phone] for an RMA (Return Merchandise Authorizaon Number)
2. Have your proof of purchase ready.
Upon inspecon, we will advise you of the repairs needed and the cost (if applicable).
Hawk will issue repair or replacement parts depending on warranty.
Cleaning
WARNING: To reduce the risk of injury from the air mover accidentally
starng, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.
User Servicing Instrucons
WARNING: Be sure to disconnect power supply before aempng to
service or remove any components. Do not aempt to service your air
mover beyond what is described in the user manual. For all other servicing,
follow instrucons in the Warranty secon.
HAWK HAWK
ENTERPRISES ENTERPRISES Hawk BVP25D User’s ManualHawk BVP25D User’s Manual

rotomolded
chassis
10’ powercord
air intake
grill
motor
fan
air intake
grill
air exhaust
grill
rubber
feet
76
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514
[phone] - www.hawkenterprises.com
Proble m
Po ssible Ca u se
So lution
U n it N ot Ru n n ing
Sw itc h is o ff
Tu rn on
N o po w er
Plu g u n it in ; check circu it bre a ke r
Ba d outle t
Ch e ck ou tlet, ch a n ge to a differe n t
ou tlet
Fa u lty Sw itch
Re p lace sw it ch *
Fa u lty or b ro k en m o tor
w ire o r co rd
U se volt/am p m e te r to ch e ck
co n tinu ity. Re p lace m o to r w ire or
co rd *
U n it ru n s b u t m a kes
lou d , grating no ises
Se ve re jo lting cau ses
blo w er w h ee l to ru b
ag ain st h ouse
Re m o ve an d rep lac e da m ag ed m oto r
or m o to r m o u n ts* if n eed ed
Se ve re jo lting de fo rm ed
hou sin g
Re p lace b low er w h ee l o r d am age d
hou sin g*
Ex ce ssive vib ration
Se ve re jo lting cau sed
m o to r sh a ft to b end –
unit is o u t o f ba lan ce
Re m o ve an d rep lac e m o to r*
D am aged b low er w h eel
bla d e
Re m o ve r blo w er w he el*
Bu ild-u p o f dirt on one
side of b low er w h ee l
Clea n b low e r w he e l b lade s
Blo w e r w h e e l n o t
turnin g
Blo w e r w h e e l jam m e d
ag ain st h ousin g
Re m o ve an d rep lac e da m ag ed m oto r
m o u n ts* Rep lac e b low er w h e el if
nee ded *
Brok en/ loo se capa cito r
w h eel; fa iled ca pacitor
Re p lace ca p ac itor w ire/m o to r if
nee ded *
D am aged h o u sing is
press ing on b low er
w h eel
Re p lace h ou sin g /u n it, if ne e d ed *
U n it ru n s b u t shuts off
on o ve rloa d
Fa ilin g m otor b earin g s.
Inte rn al e lectrical fau lt
in m oto r
Re p lace m otor*
O b stru ctio n in inta k e
grill o r exha u st grill
Re m o ve ob struction
HAWK HAWK
ENTERPRISES ENTERPRISES
TroubleshootingConstruction & Parts
Hawk BVP25D User’s ManualHawk BVP25D User’s Manual
3-Speed
Switch
Two GFCI
110 V Outlets
Circuit Breaker
control
panel
switch
knob circuit breaker
(2) 110V outlets