Systems Requirement:
• Microsoft Pocket PC, Windows CE 2.0
or higher
• IEEE 802.3 10Base-T or IEEE 802.3u
100Base-TX
• One available Type II CompactFlash
Slot
Network Operations
Systems Support:
Microsoft Windows CE and Pocket PC.
Ready, Network & Go!
It's easy to install, it's easy to use!
Everyone can do it.
Step 1 – Install the CF100W Card
Run Setup.exe program from Driver
Diskette on your desktop computer and
reset your Pocket PC, it will automatically
load network driver into your Pocket PC.
Step 2 – Get Connected
Insert the CF100W CF+ Card into your
Pocket PC’s compact flash slot. And
connect it to a network.
Step 3 – Configure it and Go
Click “network” setting to configure TCP/IP
protocol. And you are ready to go.
Copyright Hawking Technologies, Inc. 2001. All rights
reserved. All trademarks herein are the property of their
respective owners.
Mobile Network Diagram:
Features Benefits
11M Data
Transmission
High speed
communication
Supports most network
operating systems
Setup is quick and
simple
CompactFlash sized
unit
Network your Pocket PC
without the added bulk
Low Power
Consumption
Preserves the life of your
battery
Ordering Information:
CF100W 11M CF Wireless LAN Card
CF686TX 10/100M Fast Ethernet CF+ Card
CF682T 10M Ethernet CF+ Card
CF690V 56K V.90 Data/Fax CF+ Modem
CF687A CF+ to PCMCIA Adapter
PN652TX 10/100M PC Card
PN672TX 10/100M CardBus Card
PN610-X2 56K V.90 PC Card
PN656 56K 10/100M LAN Combo PC Card
Hawking Technologies, INC.
6A Faraday, Irvine, California, USA
Sales: (888) 662-8828, (949) 580-0888
Fax: (949) 580-0880
Tech Support: (949) 580-0878
Web Site: www.hawkingtech.com
Specification:
Host Interface:
• CF+ and CompactFlash Spec. Rev. 1.4
Compliant
• Type II CompactFlash I\O Card
Network
• 11Mbps IEEE 802.11b
Operating Systems
• Microsoft Pocket PC, Windows CE 2.0 or
higher
• Supports synchronization from Microsoft
Windows 95/98/2000/NT/ME/XP
Hardware Processor Compatibility
• MIPS4000, Hitachi SH3 Series, Intel
Strongarm Processors
• Compaq iPAQ, Casio E-125 Series
Power Requirements
• Normal Operation: +3.3V/5V, 120mA max
• CF+ power, No external power required
LED Indicators
One LED on the Direct Port
* Link (Green)
EMI and PTT Conformance
-FCC part 15 Class B
-CE Mark EN55002 Class B, EN50081-2
-VCCI Class B
Dimension & Weight:
• 3.46" L x 1.69" W x 0.13" H (88mm x 42.8mm
x 3.3mm)
• 1.1 oz (30g) in weight