8
make the blade push away from the object or run along the object.
This reaction can be intense enough to lose control of the tool and
can occur without a warning.
The operator should cut from right to left to minimize the chance of
kickback.
WARNING! Dress appropriately.
A. Always use the brush cutter with the shoulder strap.
B. Do NOT use saw blades. Use only blades designed for use with
brush cutters.
C. Do not operate with loose clothing or long hair. These can be
sucked into the air intake of the tool.
D. While using, always wear sturdy footwear and long trousers. Do
not operate the equipment with bare feet or open sandals.
E. Do not operate in a hazardous location. Such areas include
where there is a risk of explosion of fumes, leaking gas or
explosive dust.
F. Do not operate in a confined area. Exhaust gases, smoke or
fumes could reach dangerous concentrations.
G. Protect your tool. This tool is NOT WEATHERPROOF and
should not be exposed to direct sunlight, high ambient
temperature and damp, wet or high humidity conditions.
H. Do not smoke or use a mobile phone while refuelling. This is
potentially dangerous as it may ignite the fuel and cause an
explosion.
I. Take care not to spill fuel. When refuelling the tool ensure that
the engine has been switched off. Prevent the spilling of fuel as
this may also ignite with the hot engine. Never refuel whilst the
engine is running.
J. Be careful where you store the tool. Store the tool in a dry area
away from ammable liquids.
