Hay PIERRE CHARPIN PC TASK Series User manual

– INSTRUCTION MANUAL –
DESIGN BY PIERRE CHARPIN
PC TASK COLLECTION

 GENERAL INFORMATION 
TECHNICAL DATA
This product is supplied with an integrated LED
light source. The expected lifespan of the LED
light source is 25,000 hours, which equates to
810 years of general use. When the light source
reaches its end of life, the whole luminaire should
be replaced.
FITTING TYPE | Integrated LED
POWER W | 5,7W
COLOUR TEMPERATURE | 3100K cool white
ATTENTION
Ensure that the power supply to the circuit has
clearly been turned OFF before installing the
product. In some countries, electrical installation
must be carried out by authorised electricians/
contractors; please check with your local
authority for guidance.
The product must not be modified in any way.
HAY accepts no responsibility for any products
that have been modified or tampered with. The
external flexible cable or cord of this luminaire
cannot be replaced. If the cord is damaged,
the luminaire should be replaced. This lamp is
designed for indoor use only.
CARE AND MAINTENANCE
The product can be cleaned with a soft damp
cloth and mild detergent, or a dry microfibre
cloth. Do not use alcohol or any other solvents
to clean the product and avoid using abrasive or
rough sponges. Ensure that the power supply has
been turned OFF before cleaning the product.

Lamp
Allen key
 PARTS 
Screw
Adapter Power supply

The lamp can be used with several different bases and fixings.
Unpack all the parts and check that you have received all the
parts listed.

1.
Table Lamp only
Insert the lamp into the base (packed separately). Using the provided Allen key
and screw, the lamp can be fixed to the base through a hole underneath.

2.
Clamp only
Clamp the clamp base in place by adjusting the grip.
Insert the lamp body into the clamp base.

3.
Table Insert only
Carefully drill a 10 mm hole into a desktop where you would like the lamp to
be positioned. Insert the table. Insert into the hole and tighten the circular nut
underneath to hold firmly in place.

4.
Wall Bracket only
With a pencil, mark fixing holes on the wall.
Drill holes and insert wall plugs. Ensure you use the correct type of
wall plug for the material you are drilling into.

5.
Wall Bracket only
Screw the internal bracket to the wall with the fixings provided and place the
external plastic cover over the wall bracket.

6.
Wall Bracket only
Fix the external plastic cover in place with the provided screw.
The groove on the side of the plastic cover provides simple
cable management for the wall mounted lamp.
Tighten Small Pan Head screw
Groove
6.
Wall Bracket only
Fix the external plastic cover in place with the provided screw.
The groove on the side of the plastic cover provides simple cable
management for the wall mounted lamp.

7.
Wall Bracket only
Insert lamp into the wall bracket and push the cable
into the groove.
7.
Wall Bracket only
Insert lamp into the wall bracket and push the cable into the groove.

8.
The lamp can be freely moved and will hold in any position.
8.
The lamp can be freely moved and will hold in any position.

9.
If necessary, the joints can be adjusted using the provided torx tool.
Carefully tighten the bolts until the lamp supports itself in any position.
9.
If necessary, the joints can be adjusted using the provided torx tool.
Carefully tighten the bolts until the lamp supports itself in any position.

10.
Plug the trailing cable into the power supply.
Attach the correct adapter for your region.
The lamp is now ready for use.

 CARE & MAINTENANCE 
Our Care & Maintenance offers guidance for optimal
maintenance of your HAY product. It includes advice
and instructions on cleaning and caring for specific
materials to prolong the life of your lighting.
Please find our Care & Maintenance
guide by scanning the QR code
You can find more relevant information
on PC Task Collection by scanning the
QR code
You can also find the same information here
hay.dk/downloads

10012022
Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
www.hay.com