Hay TURN ON User manual

TURN ON
By Joel Hoff
INSTRUCTION MANUAL

A unified piece of design made from aluminium and opal
glass. The base is a faceted cylinder that works as both the
light switch and the stem that holds the spherical glass light
in place. Turning the base in a clockwise direction clicks
the LED light on, with further rotation increasing the lights
brightness. The design’s in-built movement allows the user to
intuitively brighten or dim the light.
INTRODUCTION

This product is supplied with a 4.5W integrated LED
module, which is not to be replaced by the consumer.
The expected lifespan of the LED module is 25,000 hours.
This sealed unit is not replaceable.
TECHNICAL DATA
Ensure that the power supply has been turned OFF
before cleaning the product. We reccomend that you use
a microfibre cloth to clean any dust accumulated on the
shade, arm and base. Do not clean with a wet cloth, or
use alcohol or any other solvents to clean this product.
The external flexible cable or cord of this luminaire
cannot be replaced; if the cord is damaged, the luminaire
should be destroyed.
CARE AND MAINTENANCE
In some countries electrical installations must be carried
out by authorised electricians/contractors; please check
with our local authority for guidance. The product must
not be modified in any way. HAY accepts no responsibility
for any products that have been modified or tampered
with. This lamp is designed for indoor use only.
ATTENTION

PARTS

1.
Twist the sphere of the lampshade clockwise onto the
base of the lamp to secure the shade. Only use light
force to prevent the glass from breaking.

2.
Plug the trailing cable into the power supply.

3.
Attach the correct adapter for your region.

4.
To operate the lamp, twist the body clockwise until it clicks to
turn on. Continue twisting the lamp to reach full brightness.
The lamp can be dimmed by twisting the body n the opposite
direction. Clockwise makes it brighter, counter-clockwise makes
it dimmer.

Havnen 1 8700 Horsens Denmark
[phone] / [e-mail]
03102018