Volt VWL-712-BBZ User manual

INSTALLATION INSTRUCTIONS
Specications and product details subject to change without notice.
© Copyright 2018, VOLT® Lighting, Lutz FL USA 33549 • All rights
reserved. [email protected] • 813.978.3700
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
–1–
VOLT®Low Voltage Landscape Lighting
VOLT®Salty Dog Brass LED Well Light
VWL-712-BBZ

VOLT®Salty Dog Brass LED Well Light
VWL-712-BBZ
INSTALLATION INSTRUCTIONS
www.voltlighting.com
Important: Please Read Before Installation
Important Safety Instructions
!
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing
this luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)
or more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with wire connectors that are suitable
for outdoor use.
5. Position the low voltage wire and wire connector so that it is
located within 6 inches (15.2 cm) from a building structure, a luminaire
or tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
7. If additional lengths of low voltage cable are required, please call
1-813-978-3700.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.
1. Turn o/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
6. Do not operate the luminaire tting with a missing or damaged shield.
–2–

[email protected] • 813.978.3700
Package Contents
A. (1) Fixture B. (1) PVC Tube
Product Dimensions
–3–
8.25”
6.25”
5.5”
Dig Hole
1
3”3”
3”
Dig a hole in the ground. Make sure
there is approximately 3 inches
surrounding the PVC Tube for pea
gravel or sand on all sides.
PVC Tube
Hole
Soil

INSTALLATION INSTRUCTIONS
www.voltlighting.com
Fill Pea Gravel or Sand
3
Wire Connection
2
VOLT®Salty Dog Brass LED Well Light
VWL-712-BBZ
–4–
Soil
PVC Tube
with Fixture
Pea Gravel
or Sand
Place the xture into the PVC
Tube and pass the luminaire pigtail
through the PVC Tube.
Strip both leads from the luminaire
pigtail. Using two wire connectors
(sold separately), connect the leads
from the luminaire to the main
supply cable leads.
PVC Tube
Wire Connector
Main Supply Wire
Soil
Pigtail
Fixture
Install the PVC Tube with the
xture in the hole and ll around
the xture securing it in place with
pea gravel or sand to allow for
water drainage.

[email protected] • 813.978.3700
–5–

www.voltlighting.com
–6–

[email protected] • 813.978.3700
–7–

IS-VWL-712-BBZ-ver3.pdf
Specications and product details subject to change without notice.
© Copyright 2018, VOLT®Lighting, Lutz FL USA 33549 • All rights
reserved. [email protected] • 813.978.3700
www.voltlighting.com
Help Hotline:
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)
–8–