HBF Furniture Linea Benches User manual

LINEA BENCHES HARDWARE
GENERAL NOTES
1. ALWAYS PROTECT THE UNIT DURING INSTALLATION.
2. LINEA BENCHES INSTALLATION
E1013-0001-00
PAGE 1
1 WHEN ATTACHING BENCHES WITH NO BACK PANELS, INSERT DOWELS AS SHOWN (DETAIL A)
INTO CENTER ALIGNMENT HOLES.
ASSEMBLY INSTRUCTIONS
LINEA BENCHES
Linea Benches
HBF
2 INSERT CONNECTOR BOLT & MATING BLKCAP INTO REMAINING 4 HOLES (FROM INSIDE THE BOX)
(DETAIL B, TOP REMOVED FOR CLARITY) & TIGHTEN.
531484
CONNECTOR BOLT
820158
BLKCAP
19962-0001-00
GLIDE (4 PACK)
(HUBS ONLY)
531217
GLIDE
820126
DOWEL
SEE DETAIL A
DETAIL A
SCALE 0.080
SEE DETAIL B
DETAIL B
SCALE 0.100
HBF-530396
GANG PLATE
SCREW
10X1 PH

1 WHEN ATTACHING BENCHES WITH BACK PANELS, INSERT DOWELS AS SHOWN (DETAIL C)
INTO CENTER ALIGNMENT HOLES & BACK PANEL.
Linea Benches
HBF
2 INSERT CONNECTOR BOLT & MATING BLKCAP INTO REMAINING 4 HOLES (FROM INSIDE THE BOX)
(AS SHOWN ON PAGE 1) & TIGHTEN.
E1013-0001-00
PAGE 2
3 AFTER CONNECTING BENCHES, ATTACH GANGING PLATE WHEN USING A SUPPORT FOOT.
(DETAIL D) ATTACH USING (6) 10X1 PH SCREWS
1 GLIDES: WHEN USING HUBS USE GLIDE 19961-00002-00 INTO METAL BRACKETS.
ALL OTHER BENCHES USE GLIDE 531217 INTO BOTTOM OF ENDS, BACKS, & SUPPORT FEET.
SEE DETAIL C
DETAIL C
SCALE 0.080
SUPPORT FOOT
SEE DETAIL D
DETAIL D
SCALE 0.120