HBF Furniture MOD Modular Lounge User manual

1HBF
MOD Modular Lounge
Installation Instructions

2HBF
TOOLS REQUIRED
POWERDRIVER/DRILL PHILLIPSSCREWDRIVER 4MM/8MMALLENWRENCH

3HBF
SINGLE LEG ASSEMBLY
USED FOR SINGLE/OUTER PLACEMENT IN
ASSEMBLY
• Flathead Machine Bolt ½” -13
• Connector Plate
• Metal Leg
• Adjustable Glide

4HBF
CONNECTOR LEG ASSEMBLY
USED FOR SECTION TO SECTION
PLACEMENT IN ASSEMBLY
• Flathead Machine Bolt ½” -13
• Connector Plate
• Metal Leg
• Adjustable Glide

5HBF
CORNER LEG ASSEMBLY
USED FOR INSIDE CORNER SECTIONS
PLACEMENT IN ASSEMBLY
• Flathead Machine Bolt ½” -13
• Connector Plate
• Metal Leg
• Adjustable Glide

6HBF
SINGLE LEG ATTACHMENT
USED FOR SINGLE/OUTER PLACEMENT IN
ASSEMBLY
• (4) ¼-20 x 45mm Ultra Low Profile Socket Head Bolt
• Connector Plate
• Metal Leg
• Adjustable Glide

7HBF
CONNECTOR LEG ATTACHMENT
USED FOR SECTION TO SECTION
PLACEMENT IN ASSEMBLY
• (4) ¼-20 x 45mm Ultra Low Profile Socket
Head Bolt

8HBF
CORNER LEG ATTACHMENT
USED FOR INSIDE CORNER SECTIONS
PLACEMENT IN ASSEMBLY
• (6) ¼-20 x 45mm Ultra Low Profile Socket
Head Bolt

9HBF
MENDING PLATE ATTACHMENT
USED FOR JOINING BACK SECTIONS
• (4) ¼-20 x 40mm Ultra Low Profile Socket
Head Bolt

10HBF
PREP BACK/ARM CUSHION
• Attach bracket to cushion with 8-32 machine
Screws (x2) per bracket

11HBF
ATTACHING BACK CUSHION (ARMLESS)
• Hook Cushion onto back aligning studs with
pre installed clips
• Attach back with 3/4” Wood Screws (x2)

12HBF
ATTACHING ARM CUSHION
• Hook Cushion onto back
• Attach arm with 3/4” Wood Screws (x2)

13HBF
ATTACHING SEAT CUSHION (ARMLESS)
• Slide seat cushion onto deck (use force)
• Secure with (6) 2 ½” Wood Screws on bottom
side

14HBF