HDMI SE-EX21C User manual

Operating Instructions
i
HDMI Extender over single Cat5e/6 cable
With Loop HDMI Output
HDMI Extender over CAT5 with Bi-Directional IR

Operating Instructions
1
HDMI Extender over single Cat5e/6 cable
With Loop HDMI Output
Operating instruction
Dear Cust omer
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this manual for future reference.
Notice
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute the warranty of any kind, express or implied.
Features
Each set includes one transmitter and one receiver.
Transmit Over 50m single CAT5e/6 without signal loss.
Support 1xLoop HDMI output on the transmitter.
Support high definition resolution up to Full HD 1080p.
Support Dolby True-HD, DTS-HD Master audio.
EDID reading and saving from display.
With Bi-Direction wideband IR (38~56 kHz).
Support 3D.







HDMI Extender over single Cat5e/6 cable
with Loop HDMI Output

Operating Instructions
2
S p e c i f i c a t i o n s
Operating Temperature Range -5 to +35℃(+23 to +95 )
℉
Operating Humidity Range 5 to 90%RH (No Condensation)
Data transfer speed 6.75Gbps
Connectors on Transmitter
HDMI Receptacle x 2 (1xHDMI input, 1xHDMI loop output)
RJ45 Receptacle x 1
Power DC Receptacle x 1
IR Receptacle x 2(for IR TX and RX cable)
Connectors on Receiver
HDMI Receptacle x 1
RJ45 Receptacle x 1
Power DC Receptacle x 1
IR Receptacle x 2(for IR TX and RX cable)
Resolution outputs 1080p/1080i/720p/576p/480p
Audio format supported DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc
Output Video Signal HDMI
Dimension (L×W×H) TX: L127.1xW70.6xH28.2mm
RX: L85xW65xH24mm
Power supply DC 5V Power supply
Power consumption 3.5W(MAX)
Transmission Distance 1080p up to 50m(1)
Net Weight 480g (1 Pair)
IR wavelength & frequency Wavelength: 940nm IR Frequency: 38KHz - 56KHz
Note:1.Under perfect transmission conditions including straight cable runs with no electrical interference, bends,
kinks, patch panels or wall outlets.
Package Contents
1xHDMI Transmitter
1xHDMI Receiver
2 x IR TX Emitter
2x IR RX Receiver
2x5V/1A DC Adapter
1xUser Manual

Operating Instructions
3
(1)
Panel Description
Transmitter Panel
1 . HDMI Output.
2 . EDID copy button.
3 . Status of power input. When power input on, the LED lights.
4 . Status of signal connection. When this works well, the LED lights.
5 . CAT-5E/6 output.
6 . IR TX.
7 . IR RX.
8 . HDMI Input.
9 . Power input, 5VDC.
When the sink can’t display the signal, try to connect HDMI output port of the transmitter to the display
device. Plug the power supply into Transmitter, press the “EDID copy button” and the light flashes, the
EDID data has been copied from the display device successfully, at least press ”EDID copy button” for
3 seconds, The EDID will be reset to the default setting.
The distance is 40m under 5.1CH or 7.1CH.
Note1:
Note2:
Receiver Panel
7 . Power input, 5VDC.
6 . HDMI output
5 . IR RX
4 . IR TX
3 . CAT-5E/6 input
2 . Status of power input. When power input on, the LED lights
1 . Status of signal connection. When this works well, the LED lights
RXTX
HDMI Extender over single Cat5e/6 cable
HDMI Output
RXTX

Operating Instructions
4
Connection Diagram
Connections and Operations :
1.Connect 1 source such as a Blu-Ray Player, game console, STB, etc. to the HDMI input on the transmitter
3.Con
2.Connect 1 display such as an HDTV or HD Projrctor to the Loop HDMI output on the transmitter.
nect 1 display such as an HDTV or HD Projector to the HDMI output on the receiver
.
4.Connect a single Category 5e/6/7 up to (50m) to both transmitter and receiver.
5.Plug in the IR-RX cable and IR-TX cable to the IR jack port located on the Receiver and transmitter balun.
6. Power on the transmitter and receiver firstly, then power on the source and sink.
PS3,Blu-ray DVD player, etc.
HDMI Source
Transmitter
Receiver
HDMI Cable
Cat5e/6 Cable
3D TV
3D TV
IR-TX
HDMI In
Cat5e/6 x1
Loop HDMI Out
HDMI Out
TV remote
IR-RX
IR-TX
IR-RX
DVD or STB remote
HDMI Extender over single Cat5e/6 cable
with Loop HDMI Output

Operating Instructions
5
Safety information
safeguards
To reduce the risk of electric shock, do not expose this product to rain or moisture
PRODUCT SERVICE
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
(a)The DC power supply cord or AC adaptor has been damaged;
(b)Objects or liquids have gotten into the unit;
(c)The unit has been exposed to rain;
(d)The unit does not operate normally or exhibits a marked change in performance;
(e)The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions.
Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer or
parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric
shock, or other hazards.
4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in
proper working condition.
WARRANTY
If your product does not work properly because of a defect in materials or workmanship, our Company (referred to
as "the warrantor" ) will , for the length of the period indicated as below, (Parts(2)Year ,Labor(90) Days) which
starts with the date of original purchase ("Limited Warranty period"), at its option either(a) repair your product with
new or refurbished parts, or (b) replace it with a new of a refurbished product. The decision to repair or replace will
be made by the warrantor.
During the "Labor" Limited Warranty period there will be no charge for labor.
During the "Parts" warranty period, there will be no charge for parts. You must mail-in your product during the
warranty period. This Limited Warranty is extended only to the original purchaser and only covers product
purchased as new. A purchase receipt or other proof of original purchase date is required for Limited Warranty
service.
Mail-In Service
When shipping the unit carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Include a letter detailing the complaint and provide a day time phone and/or email address where you can be
reached.
1

Operating Instructions
6
result from accidents,misuse,abuse,neglect, mishandling, misapplication, alteration, faulty installation, set-up
adjustments, misadjustment of consumer controls, improper maintenance, power line surge, lightning damage,
modification, or service by anyone other than a Factory Service center or other Authorized Servicer, or damage
that is attributable to acts of God.
2) THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED WARRANTY
COVERAGE".THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRNTY.
(As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if
applicable, travel to and from the service, loss of or damage to media or images, data or other recorded content.
The items listed are not exclusive, but are for illustration only.)
3) PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY, ARE YOUR
RESPONSIBILITY.
LIMITED WARRANTY LIMITS AND EXCLUSIONS
1) This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT
COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages
which occurred in shipment, or failures which are caused by products not supplied by warrantor,or failures which