Heat Trap Solar HTS340-CP1 User manual

Heat
Trap
Operating I
nstructions
Model
s
•HTS340-CP1
•HTS340-CP2
•HTS340-CP3
HT00IM0062
Trap
Hybrid Hot W
ater System
nstructions
and Warranty Policy
1
ater System
and Warranty Policy

2
Note: Every care has been taken to ensure accuracy in pr
eparation o this publication.
No liability c
an be
accepted or any consequences that may arise as a result o its application.
Table of Contents
. Owners Information .................................................................................................................... 3
2. System Maintenance ................................................................................................................... 7
3. Important Installation Notes ....................................................................................................... 9
8. Electrical Installation ................................................................................................................. 25
. Warranty Policy ........................................................................................................................ 2
3. Post Installation Check Sheet .................................................................................................... 4
PATENTS
This water heater may be protected by one or more patents or registered designs in the name o
Heat Trap Solar Pty Ltd
TRADE MARKS® Registered trademark o Heat Trap Solar Pty Ltd

Heat Trap Hybrid Heat Pump Installation & O
1.
Owners Information
The ollowing items should be contained with each installation kit. Be ore starting the installation,
please check care ully to ensure all items are accounted or.
Models:
HTS340-CP1
Models:
HTS340-CP2
Models:
HTS340-CP3
This appliance is not intended for use by small children or infirm persons without supervision. Young
children should be supervised to ensure that they do not play with the appliance.
The unit has been sp
ecifically designed for residential
purpose.
1.1. How it Works –
Heat Pump o
Figure
: Basic operation of a heat pump.
Heat Trap Hybrid Heat Pump Installation & O
Owners Information
The ollowing items should be contained with each installation kit. Be ore starting the installation,
please check care ully to ensure all items are accounted or.
1 x Hybrid 340 litre polymer tank
1 x Heat pump
1 x Hybrid Heat pump installation kit
1 x Solar Collector
1 x Collector roo mounting kit
1 x Composite base slab kit
1 x Hybrid 340 litre polymer tank
1 x Heat pump
1 x Hybrid Heat pump installation kit
2 x Solar Collectors
1 x Collector roo mounting kit
1 x Composite base slab kit
1 x Hybrid 340 litre polymer tank
1 x Heat pump
1 x Hybrid Heat pump installation kit
3 x Solar collectors
1 x Collector roo mounting kit
1 x Composite base slab kit
This appliance is not intended for use by small children or infirm persons without supervision. Young
children should be supervised to ensure that they do not play with the appliance.
ecifically designed for residential
hot water heating and is not suita
Heat Pump o
peration
Ambient air is drawn through a heat exchanger,
much like a radiator. The energy in the air is
absorbed into re
igerant gas which is then
compressed. The heat energy in the high pressure
gas is then removed by a heat exchanger which
trans ers it to the heating luid. This energy is then
stored in the Heat Trap tank. The removal o heat
rom the high pressure re rige
condense and then it is re-
used
The re rigerant
that is used is an environmentally
riendly, non CFC high e iciency liquid called
: Basic operation of a heat pump.
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
3
The ollowing items should be contained with each installation kit. Be ore starting the installation,
This appliance is not intended for use by small children or infirm persons without supervision. Young
hot water heating and is not suita
ble for any other
Ambient air is drawn through a heat exchanger,
much like a radiator. The energy in the air is
igerant gas which is then
compressed. The heat energy in the high pressure
gas is then removed by a heat exchanger which
trans ers it to the heating luid. This energy is then
stored in the Heat Trap tank. The removal o heat
rom the high pressure re rige
rant causes it to
used
by evaporating it.
that is used is an environmentally
riendly, non CFC high e iciency liquid called
R410a.

Heat Trap Hybrid Heat Pump Installation & O
Heat Trap Hybrid Heat Pump Installation & O
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
4

Heat Trap Hybrid Heat Pump Installation & O
1.2. System operation
The operation o your Heat Trap Hybrid W
anything other than turn on the electricity and water supplies. The Heat Pump module is
electrically connected to the storage tank and will start automatically when the water
temperature in the storag
e tank alls below
1.3.
Heat Trap Solar Energy Management System (EMS)
The EMS has been actory set and should not be tampered with. Access to the system must only
be done through direct contact with the manu acturer.
Tank
Hot water
Cold water
inlet
Heat Trap Hybrid Heat Pump Installation & O
The operation o your Heat Trap Hybrid W
ater Heater is ully automatic. You do not need to do
anything other than turn on the electricity and water supplies. The Heat Pump module is
electrically connected to the storage tank and will start automatically when the water
e tank alls below
the controlled set-point.
Heat Trap Solar Energy Management System (EMS)
The EMS has been actory set and should not be tampered with. Access to the system must only
be done through direct contact with the manu acturer.
Heat Pump
Hot water
outlet
Cold water
inlet
Solar
collectors
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
5
ater Heater is ully automatic. You do not need to do
anything other than turn on the electricity and water supplies. The Heat Pump module is
electrically connected to the storage tank and will start automatically when the water
The EMS has been actory set and should not be tampered with. Access to the system must only
Solar
collectors

Heat Trap Hybrid Heat Pump Installation & O
1.4. How long will the Heat P
ump
If a heat pump system has been installed
vary depending on the amount o hot water being used by the household and the average
outdoor ambient temperature. Generall
summer because the outside air temperature is cooler in winter there ore contains less energy.
As a rule o thumb, an average size house using 200 litres o hot water a day in Spring or Autumn
would have a
running time o 5 to 6 hours, depending on the installation location.
If a solar system has been installed
energy that has been absorbed. For example, in the summer months, the heat pump booster
not run at all whereas in winter when there is much less “ ree” energy, the heat pump may run in
order to maintain the required delivery o hot water.
1.5. Is the Heat Trap system
suitable for extremely cold climates?
The Heat Trap Hybrid hot water syste
(See zone image)
1.6. Holiday mode
I you have installed a solar system, the system
during periods when rost conditions may exist
unction to protect piping and collectors during
1.7.
Water is discharging from the top of the tank
On start-
up o a new installation, a small quantity o water will be
expelled rom the
tank purge valve. This is a normal part o the
system operation due to the expansion o the water in the low
pressure heating circuit. Once ull temperature is reached, there
will be no urther water emitted.
I water venting persists or more than two
recommended that you phone Heat Trap Solar.
Heat Trap Hybrid Heat Pump Installation & O
ump
Booster run each day?
If a heat pump system has been installed
, t
he length o time the Heat Pump will run each day will
vary depending on the amount o hot water being used by the household and the average
outdoor ambient temperature. Generall
y, the Heat Pump will run longer in winter than in
summer because the outside air temperature is cooler in winter there ore contains less energy.
As a rule o thumb, an average size house using 200 litres o hot water a day in Spring or Autumn
running time o 5 to 6 hours, depending on the installation location.
If a solar system has been installed
, the running time will vary according to the amount o solar
energy that has been absorbed. For example, in the summer months, the heat pump booster
not run at all whereas in winter when there is much less “ ree” energy, the heat pump may run in
order to maintain the required delivery o hot water.
suitable for extremely cold climates?
The Heat Trap Hybrid hot water syste
ms are only suitable or installation in
Zones
I you have installed a solar system, the system
should NOT be switched o i
during periods when rost conditions may exist
. Your system h
as been itted with an anti reeze
unction to protect piping and collectors during
intermittent periods o
light
Water is discharging from the top of the tank
up o a new installation, a small quantity o water will be
tank purge valve. This is a normal part o the
system operation due to the expansion o the water in the low
pressure heating circuit. Once ull temperature is reached, there
will be no urther water emitted.
I water venting persists or more than two
(2) days, it is
recommended that you phone Heat Trap Solar.
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
6
he length o time the Heat Pump will run each day will
vary depending on the amount o hot water being used by the household and the average
y, the Heat Pump will run longer in winter than in
summer because the outside air temperature is cooler in winter there ore contains less energy.
As a rule o thumb, an average size house using 200 litres o hot water a day in Spring or Autumn
running time o 5 to 6 hours, depending on the installation location.
, the running time will vary according to the amount o solar
energy that has been absorbed. For example, in the summer months, the heat pump booster
may
not run at all whereas in winter when there is much less “ ree” energy, the heat pump may run in
Zones
-3 only.
should NOT be switched o i
you go on holidays
as been itted with an anti reeze
light
rost.

Heat Trap Hybrid Heat Pump Installation & O
2.
System Maintenance
The Heat Trap Solar system is designed so that there is little to do in the way o system maintenance.
There are no anodes that require replacing, no pressure relie valves tha
temperature devices that need resetting. The system is designed to reduce the ongoing cost o
maintaining your investment.
There are no user serviceable components in
be removed and no adjustments made to the system settings by anyone other than an authorised
representative of Heat Trap Solar Pty Ltd.
2.1. Water Quality
Water supply rom an un iltered water source that may be highly conductive or have a high mineral
conten
t may void the system warranty.
There ore, to ensure water quality guidelines are met, the ollowing characteristics should not be
exceeded.
In areas o poor water quality, it is recommended that a so tener, condi
itted to the water supply.
2.2. Pressure Limiting Valve
Where the mains water supply pressure is greater than 550 kPa, a pressure limiting or pressure
reducing valve that complies with AS1357 must be itted to the inlet o the hot w
This is essential to sa eguard the appliance and ensure correct operation.
2.3. Collector Maintenance
In the event o extreme weather conditions it may be advisable to check the installation or a build
up o debris and lea litter.
Under normal ci
rcumstances, the glass on the collector is cleaned by natural rain all. I the
installation is located in a particularly dusty environment, such as an industrial area, it may be
necessary or a suitably experienced person to clean the glass using normal w
chemicals. I the area o the roo is also used or water collection, par
given
to which chemicals are used during cleaning.
2.4. Frost Protection
This system is not suitable for
section .6) Heat Trap
Solar Pty Ltd
damage.
Total hardness
Total Dissolved Solids (TDS)
Chloride
Magnesium
Sodium
pH
Electrical conductivity
Heat Trap Hybrid Heat Pump Installation & O
System Maintenance
The Heat Trap Solar system is designed so that there is little to do in the way o system maintenance.
There are no anodes that require replacing, no pressure relie valves tha
t need draining and no over
temperature devices that need resetting. The system is designed to reduce the ongoing cost o
There are no user serviceable components in
side
the system, and as such, it is recommended that no cover
be removed and no adjustments made to the system settings by anyone other than an authorised
representative of Heat Trap Solar Pty Ltd.
Water supply rom an un iltered water source that may be highly conductive or have a high mineral
t may void the system warranty.
There ore, to ensure water quality guidelines are met, the ollowing characteristics should not be
Table : Water quality requirements
In areas o poor water quality, it is recommended that a so tener, condi
tioner or similar device be
Where the mains water supply pressure is greater than 550 kPa, a pressure limiting or pressure
reducing valve that complies with AS1357 must be itted to the inlet o the hot w
This is essential to sa eguard the appliance and ensure correct operation.
In the event o extreme weather conditions it may be advisable to check the installation or a build
rcumstances, the glass on the collector is cleaned by natural rain all. I the
installation is located in a particularly dusty environment, such as an industrial area, it may be
necessary or a suitably experienced person to clean the glass using normal w
indow cleaning
chemicals. I the area o the roo is also used or water collection, par
ticular attention should be
to which chemicals are used during cleaning.
This system is not suitable for
installation in heavy frost prone areas
characterized as Zone 4
Solar Pty Ltd
does not warrant the solar collector against freeze related
Total hardness
200 mg/litre or ppm
Total Dissolved Solids (TDS)
600 mg/litre or ppm
250 mg/litre or ppm
10 mg/litre or ppm
150 mg/litre or ppm
Min 6.5 to Max 8.5
Electrical conductivity
850 μS/cm
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
7
The Heat Trap Solar system is designed so that there is little to do in the way o system maintenance.
t need draining and no over
-
temperature devices that need resetting. The system is designed to reduce the ongoing cost o
the system, and as such, it is recommended that no cover
s
be removed and no adjustments made to the system settings by anyone other than an authorised
Water supply rom an un iltered water source that may be highly conductive or have a high mineral
There ore, to ensure water quality guidelines are met, the ollowing characteristics should not be
tioner or similar device be
Where the mains water supply pressure is greater than 550 kPa, a pressure limiting or pressure
reducing valve that complies with AS1357 must be itted to the inlet o the hot w
ater system.
In the event o extreme weather conditions it may be advisable to check the installation or a build
-
rcumstances, the glass on the collector is cleaned by natural rain all. I the
installation is located in a particularly dusty environment, such as an industrial area, it may be
indow cleaning
ticular attention should be
characterized as Zone 4
. (see
does not warrant the solar collector against freeze related

Heat Trap Hybrid Heat Pump Installation & O
2.5. Draining the Tank
There is no requirement or draining and lushing o the Heat Trap
I
draining the system is required or service reasons, this should only be done by a trained Heat Trap
technician.
2.6. Draining the Collectors
There is no requirement or draining and lushing o the Heat Trap collector system or maintenance
purposes. I drai
ning the system is required or service or relocation reasons, this should only be
done by a trained Heat Trap technician.
2.7.
Hail Damage It is advisable to replace the
ensure maximum system efficiency. Any broken
prevent injury.
Do not attempt to replace
the Flat plate collector by
authorised Heat Trap Solar representative or suitably qualified person.
The Flat plate collector is
very robust and has been tested to Australian Standards (AS/NZ 2712).
However, i
n areas o high vandalism
or missiles.
Please contact Heat Trap Solar o
2.8. Line Strainer
Maintenance
The line strainer on the cold water inlet connection to the hybrid tank may occasionally require
cleaning.
This will lead to poor water low though the unit.
1.
Turn o the cold water inlet supply using the isolation ball valve.
2. Remo
ve the two connections attached to the inlet strainer on
connection.
3. Check inlet strainer.
lushing with clean water.
4. Once complete
, re it inlet strainer, a
5.
Turn on the cold water supply using the isolation ball valve.
6.
Check all water ittings
2.9. Heat Pump Maintenance
1.
Check that there has not been an accumulation o leaves or other material around the air
intake.
Clean and remove all debris accor
2.
Check that the electrical cord h
2.10. Freezing Damage
I your climatic region has potential or reezing there are certain
or. The most likely cause o damage by reezing is in exposed cop
joints or connections.
(I damage is evident call
Note: Frost damage is not covered by Heat
Heat Trap Hybrid Heat Pump Installation & O
There is no requirement or draining and lushing o the Heat Trap
system
or maintenance purposes
draining the system is required or service reasons, this should only be done by a trained Heat Trap
There is no requirement or draining and lushing o the Heat Trap collector system or maintenance
ning the system is required or service or relocation reasons, this should only be
done by a trained Heat Trap technician.
Hail Damage It is advisable to replace the
Flat plate collector
as soon as possible to
ensure maximum system efficiency. Any broken
glass should be cleared away to
the Flat plate collector by
yourself. This task should only be attempted by an
authorised Heat Trap Solar representative or suitably qualified person.
very robust and has been tested to Australian Standards (AS/NZ 2712).
n areas o high vandalism
, stone guards are available
to protect the
Please contact Heat Trap Solar o
r more in ormation on stone guards.
Maintenance
The line strainer on the cold water inlet connection to the hybrid tank may occasionally require
This will lead to poor water low though the unit.
Turn o the cold water inlet supply using the isolation ball valve.
ve the two connections attached to the inlet strainer on
the
I the inlet strainer is blocked,
remove debris or silt build up by
lushing with clean water.
, re it inlet strainer, a
nd tighten ittings.
Turn on the cold water supply using the isolation ball valve.
Check all water ittings
or leaks.
Check that there has not been an accumulation o leaves or other material around the air
Clean and remove all debris accor
dingly.
Check that the electrical cord h
as not been weather or damaged.
I your climatic region has potential or reezing there are certain
reeze damage
or. The most likely cause o damage by reezing is in exposed cop
per or steel piping, particularly on
(I damage is evident call
Heat Trap or
a licenced plumber).
Note: Frost damage is not covered by Heat
Trap Solar warranty.
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
8
or maintenance purposes
.
draining the system is required or service reasons, this should only be done by a trained Heat Trap
There is no requirement or draining and lushing o the Heat Trap collector system or maintenance
ning the system is required or service or relocation reasons, this should only be
as soon as possible to
glass should be cleared away to
yourself. This task should only be attempted by an
very robust and has been tested to Australian Standards (AS/NZ 2712).
to protect the
collector rom debris
The line strainer on the cold water inlet connection to the hybrid tank may occasionally require
the
cold water
remove debris or silt build up by
Check that there has not been an accumulation o leaves or other material around the air
as not been weather or damaged.
reeze damage
indicators to look
per or steel piping, particularly on
a licenced plumber).

Heat Trap Hybrid Heat Pump Installation & O
2.11. Relief Valves
are not required
The Heat Trap
Heat pump is a low pressu
pressure tank. This is done automatically.
There is no need
or the relie o any expansion or relie
2.12. Anode
s are not required
The Heat Trap
Solar Hybrid Tank is entirely constructed o non
made rom polyethylene and con orms to AS/NZS 2712.
The Heat Trap
hybrid tank does not require an anode
Before installation, the installer must ensure that the installat
compromise the structural integrity of the building.
Heat Trap Hybrid Heat Pump Installation & O
are not required
.
Heat pump is a low pressu
re system.
Any expansion is taken up within the low
pressure tank. This is done automatically.
or the relie o any expansion or relie
valves.
s are not required
Solar Hybrid Tank is entirely constructed o non
- errou
s materials. The container is
made rom polyethylene and con orms to AS/NZS 2712.
hybrid tank does not require an anode
and there is no anode
to be replaced.
Before installation, the installer must ensure that the installat
ion of the hot wa
ter system shall
compromise the structural integrity of the building.
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
9
Any expansion is taken up within the low
s materials. The container is
to be replaced.
ter system shall
not

Heat Trap Hybrid Heat Pump Installation & O
3.
Important Installation notes
3.1. Local Standards -
The following standards and regulatio
into account when planning the installation of the Heat Trap Solar Hybrid Heat
Pump System.
•AS/NZS 3500.4
National plumbing and drainage code hot water supply systems
solutions.
•HB 263-
2004 heated water systems plumbing industry commission
•
AS/NZS 3000 Electrical installations (known as the Australian/New Zealand wirin
•
Any local regulations that govern this type o installation.
Where these instructions and any local regulations are in con lict, the local regulations
3.2. Safety
No aspect o the installation
shall commence
This installatio
n should only be performed by an
licenses,
authorised by Heat Trap Solar to conduct the work.
It is imperative that installers adhere to Occupational Health and Sa ety Gui
installer is responsible or their
Take extreme care when working at heights. Use appropriate harnessing and safety wear.
Th
is system delivers hot water which may exceed
and/or local regulations relating to
3.3.
Notice to Victorian customers from the Victorian Plumbing Industry Commission.
The Victorian Building Act 1993 requires that this
by a licensed person. Only a licensed person will provide a Compliance Certi icate, showing that the
work complies with all the relevant standards. Only a licensed person will have insurance protecting
their
workmanship or six years.
The Heat Trap installation kit
meets the relevant Australian Standards as per AS1432, NZS3501 or as
outlined in AS/NZS 3500.4
Heat Trap Hybrid Heat Pump Installation & O
Important Installation notes
The following standards and regulatio
ns should be taken
into account when planning the installation of the Heat Trap Solar Hybrid Heat
National plumbing and drainage code hot water supply systems
2004 heated water systems plumbing industry commission
.
AS/NZS 3000 Electrical installations (known as the Australian/New Zealand wirin
Any local regulations that govern this type o installation.
Where these instructions and any local regulations are in con lict, the local regulations
shall commence
until all sa ety issues have
been addressed.
n should only be performed by an
approved professional
with suitable experience and
authorised by Heat Trap Solar to conduct the work.
It is imperative that installers adhere to Occupational Health and Sa ety Gui
delines at all times. The
installer is responsible or their
own
sa ety and the sa ety o those around them.
Take extreme care when working at heights. Use appropriate harnessing and safety wear.
is system delivers hot water which may exceed
50°C. Re
erence should be made to AS/NZS3500
and/or local regulations relating to
the need or tempering devices to prevent scalding.
Notice to Victorian customers from the Victorian Plumbing Industry Commission.
The Victorian Building Act 1993 requires that this
Heat Pump Water Heater System must be installed
by a licensed person. Only a licensed person will provide a Compliance Certi icate, showing that the
work complies with all the relevant standards. Only a licensed person will have insurance protecting
workmanship or six years.
meets the relevant Australian Standards as per AS1432, NZS3501 or as
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
10
ns should be taken
into account when planning the installation of the Heat Trap Solar Hybrid Heat
National plumbing and drainage code hot water supply systems
– acceptable
AS/NZS 3000 Electrical installations (known as the Australian/New Zealand wirin
g rules).
Where these instructions and any local regulations are in con lict, the local regulations
shall prevail.
been addressed.
with suitable experience and
delines at all times. The
sa ety and the sa ety o those around them.
Take extreme care when working at heights. Use appropriate harnessing and safety wear.
erence should be made to AS/NZS3500
the need or tempering devices to prevent scalding.
Notice to Victorian customers from the Victorian Plumbing Industry Commission.
Heat Pump Water Heater System must be installed
by a licensed person. Only a licensed person will provide a Compliance Certi icate, showing that the
work complies with all the relevant standards. Only a licensed person will have insurance protecting
meets the relevant Australian Standards as per AS1432, NZS3501 or as

Heat Trap Hybrid Heat Pump Installation & O
4. Electrical i
nstallation
The electrical supply to the heat pump
not be used.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
qualified person.
The Heat Trap EMS control system has no user adjustable parameters and cannot be changed
control parameters have been designed to achieve maximum e iciency and have been used
determine the amount o Small Technology Credits that you will receive.
located inside the weatherproo cover on the ront o the Heat Trap
display acility. This cover should not be removed unless by a trained technician as this may
compromise the weather protection and cause ailure. The EMS system will not be a ected by an o
peak ripple system.
Heat Trap Hybrid Heat Pump Installation & O
nstallation
The electrical supply to the heat pump
and controller must be continuously a
vailable. Off Peak power must
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
The Heat Trap EMS control system has no user adjustable parameters and cannot be changed
control parameters have been designed to achieve maximum e iciency and have been used
determine the amount o Small Technology Credits that you will receive.
The controller board is
located inside the weatherproo cover on the ront o the Heat Trap
tank and has no keypad or
display acility. This cover should not be removed unless by a trained technician as this may
compromise the weather protection and cause ailure. The EMS system will not be a ected by an o
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
11
vailable. Off Peak power must
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
suitably
The Heat Trap EMS control system has no user adjustable parameters and cannot be changed
. The
control parameters have been designed to achieve maximum e iciency and have been used
The controller board is
tank and has no keypad or
display acility. This cover should not be removed unless by a trained technician as this may
compromise the weather protection and cause ailure. The EMS system will not be a ected by an o
-

Heat Trap Hybrid Heat Pump Installation & O
5. Warranty Policy
5.1. Warranty Conditions
1. The Heat Trap
Hybrid tank
supplied with the Heat Pump Water Heater System and in accordance with all relevant
statutory and local requirements o the state in which the
2. Where a
ailed component, Hybrid tank, Solar Collector or
warranty, the balance o the original warranty period will remain e ective. The replaced
component o the
Hybrid tank
3.
The warranty only applies to the
original or genuine (company) component replacement parts. The warranty does not cover
any plumbing or electrical parts supplied by the installer and
Hybrid tank and Heat pump
pressure limiting valve, isolation valves, non
switches, pumps etc.;
4.
Where the solar collector is i
o accessing the site sa ely, including the cost o additional materials handling and/or sa ety
equipment shall be the owner’s responsibility.
5. The
system must be sized to supply the hot wate
in the Heat Trap
Hybrid Solar and Heat Pump
6.
Where the Hybrid Solar Hot water System is installed outside the boundaries o a
metropolitan area as de ined by Heat
accredited service agent, the cost o transport, insurance and travelling costs between the
nearest accredited service agent's premises and the installed site shall be the owner's
responsibility.
5.2. Warranty Exclusion
The warran
ty does not cover aults that are as a result o :
1.
Accidental damage to the
Go
d such as loods, storms, ires, lightning strikes and third party acts or omissions;
2.
Misuse or abnormal use o t
3.
Installation or repairs or attempts to install or repair by any person other than a Heat Trap
accredited service agent or the Heat
4.
Installation not in accordance with t
relevant statutory and local requirements in the State or Territory in which the water heater
is installed;
5.
Any water supply not complying with the supply guidelines outlined in
Operating and Warranty
6. The water heater
bein
water Heater System, Owners
requirements;
7.
Fair wear and tear rom adverse conditions including corrosion
8. Faulty Plumbing;
where
components;
9.
A ailure o electricity or water supplies
comply with relevant codes o acts
Heat Trap Hybrid Heat Pump Installation & O
Hybrid tank
must be installed in accordance with the installation instructions
supplied with the Heat Pump Water Heater System and in accordance with all relevant
statutory and local requirements o the state in which the
water heater is installed
ailed component, Hybrid tank, Solar Collector or
Heat pump
warranty, the balance o the original warranty period will remain e ective. The replaced
Hybrid tank
or Heat pump does not c
arry a new warranty
The warranty only applies to the
Hybrid tank, Solar Collector or
Heat pump
original or genuine (company) component replacement parts. The warranty does not cover
any plumbing or electrical parts supplied by the installer and
not an integral part o the
Hybrid tank and Heat pump
system. Such parts would include
(but not be limited to),
pressure limiting valve, isolation valves, non
-return valves,
tempering valves,
Where the solar collector is i
nstalled in a position that does not allow ready access, the cost
o accessing the site sa ely, including the cost o additional materials handling and/or sa ety
equipment shall be the owner’s responsibility.
system must be sized to supply the hot wate
r demand in accordance with the guidelines
Hybrid Solar and Heat Pump
Water Heater System literature;
Where the Hybrid Solar Hot water System is installed outside the boundaries o a
metropolitan area as de ined by Heat
Trap Solar or urt
her than 50 kilometres rom an
accredited service agent, the cost o transport, insurance and travelling costs between the
nearest accredited service agent's premises and the installed site shall be the owner's
ty does not cover aults that are as a result o :
Accidental damage to the
Tank, Heat pump
or any component, including
d such as loods, storms, ires, lightning strikes and third party acts or omissions;
Misuse or abnormal use o t
he water heater;
Installation or repairs or attempts to install or repair by any person other than a Heat Trap
accredited service agent or the Heat
Trap service department;
Installation not in accordance with t
he Owners Operating and Warranty
relevant statutory and local requirements in the State or Territory in which the water heater
Any water supply not complying with the supply guidelines outlined in
Operating and Warranty
instructions;
bein
g
installed in a position that does not comply with the Heat
water Heater System, Owners
Operating and Warranty
instructions relevant
Fair wear and tear rom adverse conditions including corrosion
;
where
water leaks are related to plumbing and
not the tank and its
A ailure o electricity or water supplies
; where the supply o electricity or water does not
comply with relevant codes o acts
;
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
12
must be installed in accordance with the installation instructions
supplied with the Heat Pump Water Heater System and in accordance with all relevant
water heater is installed
;
Heat pump
is replaced under
warranty, the balance o the original warranty period will remain e ective. The replaced
arry a new warranty
;
Heat pump
system and
original or genuine (company) component replacement parts. The warranty does not cover
not an integral part o the
(but not be limited to),
tempering valves,
electrical
nstalled in a position that does not allow ready access, the cost
o accessing the site sa ely, including the cost o additional materials handling and/or sa ety
r demand in accordance with the guidelines
Water Heater System literature;
Where the Hybrid Solar Hot water System is installed outside the boundaries o a
her than 50 kilometres rom an
accredited service agent, the cost o transport, insurance and travelling costs between the
nearest accredited service agent's premises and the installed site shall be the owner's
or any component, including
as a result, acts o
d such as loods, storms, ires, lightning strikes and third party acts or omissions;
Installation or repairs or attempts to install or repair by any person other than a Heat Trap
he Owners Operating and Warranty
instructions or with
relevant statutory and local requirements in the State or Territory in which the water heater
Any water supply not complying with the supply guidelines outlined in
the Owner’s
installed in a position that does not comply with the Heat
Trap Hot
instructions relevant
to statutory
not the tank and its
; where the supply o electricity or water does not

Heat Trap Hybrid Heat Pump Installation & O
10. T
he unit ails to operate as a result o ice orma
Pump Water Heater System
11.
Where the Hybrid tank, Heat Pump Water Heater System or its component has ailed directly
or indirectly as a result o excessive water pressure
12. The o
ver low vent drai
5.3. Warranty Period
Subject to the Warranty Conditions and Exclusions stated above, your
System is warranted
rom date o commissioning
COMPONENT
i.
Polymer storage cylinde
ii. Storage
heat exchanger and piping
iii. Solar collector(s)
iv. Heat Pump
v. Other components
Subject to any statutory provisions to the contrary,
incorrect installation, damage to property including furniture, carpets, walls, foundations,
economic loss, injury to person(s), and any legal or other damages resulting from any
manufacturing fault or defect,
other materials caused by temperature, workmanship or other modes of failure.
Heat Trap Hybrid Heat Pump Installation & O
he unit ails to operate as a result o ice orma
tion in the pipe work to or rom the
Pump Water Heater System
or solar collectors;
Where the Hybrid tank, Heat Pump Water Heater System or its component has ailed directly
or indirectly as a result o excessive water pressure
;
ver low vent drai
n has been blocked or corroded.
Subject to the Warranty Conditions and Exclusions stated above, your
H
ybrid tank and Heat P
rom date o commissioning
as ollows:
PARTS
LABOUR
Polymer storage cylinde
r 10 years
3 years
heat exchanger and piping
10 years
3 years
5 years 3
years
2 years
1 year
2 years
1 year
Subject to any statutory provisions to the contrary,
this warranty excludes any and all claims for
incorrect installation, damage to property including furniture, carpets, walls, foundations,
economic loss, injury to person(s), and any legal or other damages resulting from any
manufacturing fault or defect,
or due to leakage from fittings and/or pipe work of metal, plastic or
other materials caused by temperature, workmanship or other modes of failure.
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
13
tion in the pipe work to or rom the
Heat
Where the Hybrid tank, Heat Pump Water Heater System or its component has ailed directly
ybrid tank and Heat P
ump
LABOUR
3 years
3 years
years
1 year
1 year
this warranty excludes any and all claims for
incorrect installation, damage to property including furniture, carpets, walls, foundations,
economic loss, injury to person(s), and any legal or other damages resulting from any
or due to leakage from fittings and/or pipe work of metal, plastic or
other materials caused by temperature, workmanship or other modes of failure.

Heat Trap Hybrid Heat Pump Installation & O
6.
Post Installation Inspection Checklist
On completion o the installation, inspect and check o each item in the check list.
Check Sheet
-Ensure the system
is well ble
-Check that t
he tank is installed on a level sturdy sur ace.
-Ensure that a c
omposite base has been
-Check t
here is no water leaking rom the heat pump low and return lines and ittings
-Check t
he wiring between the tank and the
-Ensure a
dedicated water supply/
-Check the water strainer on
-Ensure t
he Heat pump is connected to a 240 volt 10
-Ensure power
is connected and heat pump is operational
Installed By…………………………………………………… Date…………………………………
Inspected By …………………………………………………. Date…………………………………
Notes:
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………
This operating instruction is
only a guide
responsible or any damage to person or property that results during the installation or subsequent
use o this heat pump
and related system components
Heat Trap Hybrid Heat Pump Installation & O
Post Installation Inspection Checklist
On completion o the installation, inspect and check o each item in the check list.
is well ble
d and ALL air has been purged rom the system.
he tank is installed on a level sturdy sur ace.
omposite base has been
installed
here is no water leaking rom the heat pump low and return lines and ittings
he wiring between the tank and the
heat pump unit is properly connected.
dedicated water supply/
isolation valve has been installed.
the cold water inlet is clean.
he Heat pump is connected to a 240 volt 10
-amp GPO
is connected and heat pump is operational
Installed By…………………………………………………… Date…………………………………
Inspected By …………………………………………………. Date…………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………
………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………
only a guide
. As such, Heat Trap Solar Pty Ltd
shall
responsible or any damage to person or property that results during the installation or subsequent
and related system components
.
Heat Trap Hybrid Heat Pump Installation & O
perating Instructions
14
On completion o the installation, inspect and check o each item in the check list.
Post Installation
d and ALL air has been purged rom the system.
□
□
□
here is no water leaking rom the heat pump low and return lines and ittings
□
heat pump unit is properly connected.
□
□
□
□
□
……………………………………………………………………………………………………………………………………………………………
………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
……………………………………………………………………………………………………………………………………………………………
shall
not be held
responsible or any damage to person or property that results during the installation or subsequent