salav STM-501 User manual

Steam Mop
STM-501
www.salavusa.com

www.salavusa.com

Thank you for purchasing this SALAV product. Please read this manual prior to using
your SALAV appliance. For more product information, FAQ and customer support please
visit our website at www.salavusa.com.
1.Keep the appliance and packaging film out of the reach of children.
2.This appliance is not designed to be used by individuals (including children) with
limited physical, sensory or mental abilities or those without sufficient experience
and/or knowledge, unless they are supervised by someone responsible for their
safety. Improper use can lead to injuries, burns and electric shock.
3.This appliance is suited for cleaning heat-resistant surfaces only. The appliance is
not suited for unsealed wooden flooring, soft plastic, glass, walls, counters, leather,
unglazed ceramic floors, and wooden furniture. We recommend checking the use
and care instructions from the floor manufacture before using this appliance.
4.Please use standard electricity service voltage 120v. Connecting to the incorrect
voltage may cause damage to the appliance and void the warranty.
5.Keep the appliance away from moisture to avoid electric shock. Do not submerge the
appliance, plug or power cord in water or other liquids.
6.Do not leave this appliance unattended while in operation.
7.Never operate the steam mop without water. Never fill the water reservoir beyond
the maximum filling amount.
8.Do not fill water tank with hot water, cleaning agent, scented perfumes, oils or any
other chemicals. Doing so could destroy the appliance.
9.Unplug the power cord and allow the appliance to cool down
completely before draining the water tank; changing the mop pad; and cleaning for
storage.
10.Keep the appliance away from flammable materials. Do not use the appliance in
rooms containing easily ignitable dust or poisonous and explosive fumes.
11.Inspect the appliance for damage every time before use. In case of defects or
damage do not operate the appliance until it is serviced by a certified technician.
12.Unplug the appliance by grasping the plug from the wall outlet. Do not pull or tug
on the power cord to unplug.
13.Using extension cord is not recommended to avoid hazards caused by overheating
or overload.
14.Before using the appliance always check the mop pad for wear; do not use if it
shows any signs of wear or damage –it may damage your flooring.
15.Use the appliance only when it is completely assembled and operational. Make sure
mop pad is firmly attached and water reservoir is full.
16.Always test the appliance at a small, inconspicuous spot before cleaning. Do not
place the appliance in the same spot for more than 10 seconds to avoid damage
from heavy heating.
17.Never direct the steam mop at people, animal, plans or other sensitive objects.
18.Do not touch the bottom of the appliance during operation.
19.Do not tilt or turn the appliance over when in use . Only use on flat, horizontal
surfaces.
20.Use only the accessories included and recommended by the manufacturer.
21.Never use the appliance without the mop pad.
22.Always work with sufficient lighting and do not use the appliance outdoors.
23.Store the appliance indoors in a cool, dry place.

Quick Clamp for
Height Adjustment Handle
MAX
MIN
CAB LE STO RE
Carpet Glider Main Body with
Water Reservoir
Mop Pad Measuring Cup
Cord Hooks
Mop Head
Telescopic
Handle Pole
STM-501
320ML
45 seconds
120V ~ 60Hz
1100W
Model
Water Tank Capacity
Steam Ready Time
Input Voltage
Output Power

Pull
Set Off Cover Insert
Stick
Open
STEAM MOP
MAX
MIN
MA X
Open the Quick Clamp and adjust
handle to desire length. Close the Quick Clamp to lock the handle in
place and insert the telescopic pole into the
main body of the steam mop.
Secure the Mop Pad to the
bottom of the Mop Head firmly.
Open the cover to the water reservoir and
fill with water. Do not overfill. Snap the
cover back on before use.

STEP 3
STEP 2
ON
99.9%
Sterilized
Plug in steam mop and turn on by
pressing Power Button. Wait 45 seconds for steam ready time.
Steam mop is now ready for use. High
temperature steam can kill up to 99.9% of germs
and bacteria.

OFF
3
4
3
Pull
Press
Remove
Turn power off and unplug the steam mop.
Allow the steam mop to cool down
completely (about 30 mins).
Press release button to unlock the
handle, pull out the handle before
draining out the water.
Install the Telescopic Handle Pole
to the main body. Wrap power cord
around the cord hooks. Remove the mop pad for cleaning.

ACCESSORIES INSTRUCTION FOR USE
Stick
Screw
Attach the Mop Pad to the
bottom of the Mop Head firmly.
For carpet cleaning, make sure
the Mop Pad is firmly attached
to the Mop Head and place mop
on top of the Carpet Glider.
Rotate the Cord Hook down
for quick release of power
cord.

10S
The appliance
is not plugged in.
Plug into the
electrical outlet.
Check the power
or ask a qualified
electrician for help.
The water tank
is empty.
Household power
system problem
/Fuse is blown.
Refill the
water tank.
MA X
MIN
MAX
MIN
MAX
MIN
The appliance
is not turning
on. The power
indicating light
does not light
up.
The appliance
fails to steam.
The power
indicating light
is on.
The appliance
fails to steam.
The power
indicating light
is on.
The appliance
fails to steam.
The power
indicating light
is on.
The appliance
need more
time to warm-
up.
Wait 45 seconds
to warm-up.
The appliance will
automatic shut
off if water tank
is empty.
MAX
MIN
Wait for the
appliance to
cool down and
refill the
water tank.