heimgard HUB 4G User manual

Quick start guide version 1.0
Requires
A SIM Card
HUB
4G

What is in
the box
A.
Heimgard hub 4G
Not Included
B.
Power cable
Device
overview
D.
Power switch
F.
Add Phone
Button
I.
External
antenna port
A.
Hub 4G
D.
Mini SIM card
E.
Power input
G.
Reset
H.
LAN port
I.
External
antenna port
C.
Mini SIM card sticker

J.
SIM Card slot
Bottom of
device
Front
Device
overview
LED light bar
Power
WiFi LAN
Smart
House
Signal
Strength
Some SIM cardws are too thin and require you to add
the SIM card sticker (C) onto your SIM card (D) to
ensure a proper t.
Remove the protective layer on the SIM card sticker
(C) and place the sticker on the Top of the SIM card.
Top
Bottom Top with
sticker
1.
2. Insert the Mini SIM card (C)
into the SIM card slot (H).
WiFi SSID: xxxxx-XXXX
WiFi Password: XxXxxxX
IMEI: XXXXXXXXXXXXXXXXXX

Connect the Power cable (B) to the Hub (A) and plug
in the power adapter into a wall socket
4.
3.
Turn on the power by pressing the Power switch (D).
The LED light bar will indicated power is on when
the light appears above the power symbol.
5. You are ready to connect to the WiFI when a light
appears on LED light bar above the 2.4 and/or 5 and
you signal indicators.
It may take up to 3 minutes for your system to
connect.
See the SIM card troubleshoot page if you
6. Connect your laptop or other internet enabled device
to the wireless network.
The WiFi network name (WiFi SSiD) and Password
can be found on the bottom of your Hub
WiFi SSID: xxxxx-XXXX
WiFi Password: XxXxxxX

7.
You will now be connected to the wireless router,
but you may not be able to access the interent
without entering the SIM card’s PIN code.
Open your web browser and enter:
http://192.168.8.1
8. Your web browser may inform you that
your connection isn’t private.
Click: advanced
Click: continue to 192.168.8.1
You will now be prompted to
enter a Username and Password
9.
Username: admin
Password: admin + last 4 digits of IMEI#
(example): admin1234
Locate the last 4 digits of your IMEI number on the
bottom of the Hub.
IMEI: XXXXXXXXXXXXXXXXXX
After a successful login, you will be prompted to
change your password. This is not required. If you
change your password you will have to login again.
Enter the PIN privided by your SIM card provider
Click: Verify
Click: OK
Under the Pin Managment tab
Click: Disable
Enter: your PIN code
Click: Apply
10.

Click the getting
started tab and follow
the in-app instructions
11. Download the Heimgard app
Check that the cables are inserted correctly
Note: It could take up to 5 minutes for your hub to
start. The software may be updating.
If you are experiencing any abnormal behaviour you
can perform a Factory Reset.
Note: This process will delete your existing system
and reset it. You will need to recongure all your
devices after the reset.
You will need a pen. Press and hold reset button (G)
for 5 seconds. The process can take upto 5 minutes
to successful reset. You will now need to reconnect
be able to connect to your device.
Still having problems?
Contact costumer service
Troubleshoot

Website: heimgard.com/support
Email: [email protected]
Facebook: facebook.com/heimgardnorge/
Telephone: [phone]
Need help?
Visit heimgard.com for
more information and
tips on how to use.
1. Read through these instructions.
2. Keep these instructions on hand.
3. Notice all warnings.
4. Follow all instructions accordingly.
5. Clean only with dry soft cloth. Household cleaners and solvents can
damage the nish on your device.
6. Do not block any ventilation openings. Install in accordance with the
these instructions.
7. Do not install near any heat sources such as radiators, heat registers,
stoves or other device that produce heat.
8. Do not use this device near water.
9. Warning: To reduce the risk of re or electric shock, do not expose this
device to rain or moisture.
10. Do not expose device to dripping or splashing.
11. Protect the attached cables from being walked on or pinched, par-
ticularly at plugs, convenience receptacles, and the point the exit the
apparatus.
12. Only use attachments/accessories specied by the manufacturer.
13. Unplug this device during lightning storms or when unused for long
periods of time.
14. All servicing should be performed by qualied service personnel. Ser-
vicing is required when the device has been damaged in any way.
15. The main plug should be easily available to disconnect the device.
16. Operating temperature: 0°C to +50°C
17. Operating relative humidity: 5% to 85% RH (no condensation)
Important safety
information
Dispose of them in the proper waste
container.

heimgard.com