Hemisphere GPS ISB B.Y.O.B. MODULAR RACK User manual

ISB B.Y.O.B. MODULAR
RACK
INSTALLATION MANUAL
V1.0 9/26/2022
1

1. Use low strength threadlocker on all hardware.
2. Check all hardware before riding
3. Leave everything loose until the very end.
4. Remove the side trim with the tail lights.
5. Install the curved brackets under the trim first, using the original OEM bolts.
6. Install the 3 keyslot studs with the flat washers and flange head screws. Leave
loose enough to adjust if needed.
2

3

4

5
7. Remove the side trim with the tail lights.
8. Install the arc bracket with OEM bolts.
9. Reinstall trim panels.
10. Install mounting brackets with M8 bolts, lock washers and flat washers. Note
orientation of the bracket –left and right are opposite.
11. Install backing plate using 5 flat head screws
12. Drop mounting plate onto backing plate through keyslot holes. If studs to not
align, loosen the stud screws, adjust and retighten.

6