Hi-Line DIN-DMX2-RJ45 Service manual

www.hiline‐lighting.co.ukT.02038070525


DINRail4ChannelsDMX512LEDControllersettings(DIN‐DMX2‐RJ45)


Usingthedigitaldisplayandrespectivebuttonsyoumaychange“defaultsettings”asshownbelow
1.SettheDMX512startaddress
Pressing1st&2ndbuttonfor2secondswillactivate"DMXset"process
Usetherespective3buttonstosettheDMXstartaddressaccordingly.
Pressanybuttonfor2secondstosavethesettings.
2.Select3or4channelsoperation(RGB/RGBW)
Pressing2nd&and3rdbuttonfor2seconds"cH"willappearatthedisplayflashing(cH=channel
selectionmode)
Usingthe1stbuttonyoumaychoose1/2/3/4"cH"whichwillsetthecontrolleractivechannels.
Asanexample"3"willset3activechannelsoutof4available.
Pressanybuttonfor2secondstosavethesettings.
(Defaultsettingis"4"channels)
Notes:
Settingactivechannelto"1":All4channelstorespondattheDMXaddress001
Settingactivechannelto"2":Channels1&3willrespondattheDMXaddress001,Channels2&4
willrespondattheDMXaddress002

www.hiline‐lighting.co.ukT.02038070525

Settingactivechannelto"3":Channels1/2/3willrespondattheDMXaddress001/002/003,
Channel4willrespondattheDMXaddress001
Settingactivechannelto"4":Channels1/2/3/4willrespondattheDMXaddress001/002/003/004
3.ChangethePWMfrequency(200or1500Hz)ordimmingcurve
(Defaultsettingis"200Hz",lineardimming)
OurLEDcontrolleroperateson2differentfrequencies,thedefaultis200Hzandthealternativeis
1500Hz
Pressing1st&and3rdbuttonfor2seconds"P‐c"willappearonthedisplay(P=PWMfrequency,
c=dimmingmode)
P=2(PWMfrequency=200Hz),P=1(PWMfrequency=1500Hz)
c=2(Lineardimming),c=1(logarithmicdimming)


Specification
InputVoltage:12to36VoltsDC
Outputvoltage:Asperinputvoltage(12‐36V)
Maximumoutputcurrent:5Ampsperchannel
OutputChannels:4Channels
Outputpower:4CHx60‐180Weach(12‐36V)
Mode:ConstantVoltage
Signalinput:DMX512
DMXStartAddresssettings:1to512
Mounting:DINRail(3Mod)
Numberofmodules:3
Warranty:5Years