
Easy HD Expressway!
WWW.HIDES.COM.TW 3
2. Click on next and you will see the following after it’s finished.
3. If necessary , you can check if the device “IT9300 BDA Device”is listed in device manager
BDA Viewer Plus –Scan/ Play/ Capture TS
1. Make sure to connect UT-160 with the antenna or coaxial cable first.
2. Copy the folder “\BdaViewer+” on the CD to your local hard disk, say C:, D:, E: or F:…The
following instructions assume F: drive is used.
3. Double click on “Install_Filter.bat” in F:\BdaViewer+\ to install required filters to run BDA
Viewer.
4. Double click on “BDAViewerPlus.exe” in F:\BdaViewer+\ folder.
5. Click on “Control-> Channel List” to launch the scan window.