HIDITION GAMING T-1 User manual

IN-EAR GAMING HEADSET
MANUAL

00
Contents
1 / T-1 Package Includes
2 / T-1 Parts Name
3 / Quick Start
4 / How to Connect MMCX Connectors
5 / How to Disconnect MMCX Connectors
6 / How to Connect to PC
7 / How to Manage T-1
8 / Specification
9 / Precautions
1~2 P
3~5 P
6~12 P
13~16 P
17~18 P
19~20 P
21~23 P
24~25 P
26~29 P

01
T-1 Package Includes
T-1 and Accessories
1

Earcaps
S/M/L
Cable tie
Y adapter
for PC
IN-EAR GAMING HEADSET
M M
L L
SS
2

02
T-1 Parts Name
3

MMCX Connectors
Mic Splitter
Adjustable-fit boom mic hanger
Unit
Microphone Head
Mic On/Off Switch
3.5mm 4Pole Plug
OVERALL VIEW
T-1 Parts Name
4

MMCX Connectors
Nozzle
Unit(Left)
Unit(Right)
Earcaps
DETAIL VIEW
T-1 Parts Name
5

03
Quick Start
How to wear T-1
& Adjust the fit again
6

Choose one of the sizes Small, Medium, Large
and replace both sides of the unit.
STEP . 1
STEP . 2
Place the T-1 Adjustable-fit boom mic hanger and
the cable connected to the unit over the ear hooks.
7

① Completely attach the mic splitter into the inside of the earlobes.
② Wrap the left unit around the top of the ear hook.
③ Insert the earbud into the ear in the over-ear-wearing method.
STEP . 3
STEP . 4
① With the microphone splitter fully attached
to the inside of the earlobes,
② Adjustable-fit boom mic hanger Bend down to face down.





8

① Bend the Adjustable-fit boom microphone hanger
upward so that the microphone head faces the mouth,
in the position of the 'tragus' of the ear, as shown in the picture.
STEP . 5
STEP . 6
① Adjust the Adjustable-fit boom microphone hanger and
② mic splitter to be closely attached to the ear and body.



9

Wrap the right unit around the upper part of the earlobe
and insert it into the ear canal using the over-ear-wearing method
STEP . 7
STEP . 8
Plug T-1's cables into your gaming device,
and it's time for you to enjoy
T-1's HIGHEND GAMING SOUND.

10

*Tips
HOLD
With the microphone splitter fixed,
bend the Adjustable-fit boom-
microphone hanger outward
(the side that adheres closely
to the body) to set the microphone
splitter more tightly to the ear.
*Tips
11

Spread the Adjustable-fit boom-
microphone hanger like the above image.
Proceed again
from the 2nd to 6th steps of "Quick Start."
STEP . 1
STEP . 2
Quick Start
Adjust the fit again
12
- If the wearing is not perfect, refer to the “Tips” section.
- Do not bend or twist the mic head, mic splitter or mic Cable
of the cable firmly. It can cause cable conductor disconnection.
Warning

04
How to Connect
MMCX Connectors
How to connect MMCX connectors
with Unit
13

Remove the unit from the sponge.
STEP . 1
STEP . 2
Distinguish the right and left of the unit.
There is a dot on the top of the MMCX connectorof the left unit.
LR
DOT
14

STEP . 3
STEP . 4
Hold the unit and MMCX connector with both hands
in the closest position and connect them.
BLUE RED
R
L
After distinguish the left and right unit,
Connect the MMCX connector with the blue ring to the left unit.
Connect the MMCX connector with the red ring to the right unit.
15

The unit and MMCX connector are pushed together
until they make a sound indicating they are connected.
STEP . 5
STEP . 6
LR
BLUE RED
Check that the left MMCX connector is properly connected
to the left unit and the right MMCX connector
is properly connected to the right unit.
Make sure
differentiate
the Left and
Right sides
주의
16
DOT

17
04
How to Disconnect
MMCX Connectors
How to Disconnect MMCX connectors
with Unit

Hold the unit and its MMCX Connector
with both of your hands.
(As of close as possible to its seams)
STEP . 1
STEP . 2
Pull away cables from the connectors
in a parallel motion.
18