Hifonics TPS-CM65W Instruction Manual

If you are replacing an older or inferior speaker, the
location is chosen for you. Make sure the speaker ts
properly in the hole for the old speaker.
If you are creating your own new location, you must be
careful to verify that there is sufcient depth to mount the
speaker.
Choose a suitable
mounting location
Speaker Mounting Location
Speaker Dimensions
CAUTION
Always consider consulting a professional audio installer
before installing new speakers. Many manufacturers locate
speakers behind interior panels that require special tools to
remove. Be careful and take your time.
If you are using the speaker wire supplied with your new
speakers make sure that you run the speaker wires only
through safe areas. Do not let speaker wire make contact with
metal edges or hot engine components.
Congratulations on your choice of a Hifonics speaker.
This “Quick Start” Installation guide is meant to help
you complete a basic installation. For more detailed
information on system setting, speaker and subwoofer
conguration, and full specications by model, visit our
website at mbquart.com
It’s a good idea to conrm that you have purchased the
correct size speakers to t your application. If you have any
reservations about being able to complete the installation
yourself, we recommend contacting a professional.
A B C D E
TPS-CM65W 6.77”(172) 3.11”(79) .78”(20) 3.42”(87) 5.59”(142)
Before you start
Once you are sure the speaker ts and has
adequate clearance, connect the positive and
negative wires to the proper terminals. Securely
screw the speaker into place.
Carefully select a route for the speaker wires. If
using existing speaker wires, conrm that the wire is
in good shape and not shorted.
Conrm t and
mount speaker
Route signal
Speaker installation
Wiring
A
C
B
D
E
Audio Signal
Negative
Audio Signal
Positive
A
C
B
D
E
Audio Signal
Negative
Audio Signal
Positive

Quick Start
Installation Guide
WARRANTY
Maxxsonics USA Inc. warrants this product, to the original consumer purchaser, to be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
Maxxsonics USA Inc. will, at it’s discretion, repair or replace defective products during the warranty
period. Components that prove to be defective in materials and workmanship under proper installation
and use must be returned to the original authorized Maxxsonics USA Inc. retailer from where it was
purchased. A photocopy of the original receipt must accompany the product being returned. The
costs associated with removal, re-installation and freight are not the responsibility of Maxxsonics
USA Inc. This warranty is limited to defective parts and specically excludes any incidental or
consequential damages connected therewith. To view the full warranty, please visit the website.
Hifonics products are designed and engineered in the USA by
www.maxxsonics.com
TPS skr QSG 01 - rev1
TPS-CM65W