High Tech Pet Express Train User manual

Express Train
Electronic Radio Dog Training Collar
OPERATING INSTRUCTIONS

Product Safety Statements
Proper Collar Use:
Express Train Radio Electronic Dog Training Collars are intended for
the sole purpose of behavior modication in dogs and should be used
according to manufacturer’s instructions. High Tech Pet Products, Inc.
does not assume any liability for the improper use of an Express Train
Radio Electronic Dog Training Collar.
Proper Fit:
A loose t can allow the collar to move around on the dog’s neck.
When this happens, the contact points may rub the skin and cause
irritation. If the unit is too loose, the contact points will not make
proper contact and your dog will not receive consistent stimulation.
For proper collar t, please see page 8.
Skin Conditions: A small percentage of dogs may experience a skin
condition called pressure necrosis, also known as contact dermatitis,
caused by the pressure of the two probes against the same place on
the dog’s neck for an extended period of time. This condition causes an
infection, creating irritation and sores. We recommend you check your
dog’s neck often to ensure that no such condition is evident. If your
dog has a history of sensitive skin, eczema, skin allergies or rashes we
recommend that you do not use an electronic fence collar to contain an
animal. If you do observe a skin irritation, take your dog to a veterinar-
ian who may prescribe a local ointment to clear up the condition. Bear
in mind that it is not possible for the shock stimulus emitted by the
Express Train collar to directly damage your pet’s skin. The electrical
current output is simply too low to cause burning, or any other type of
cellular, skin or organ damage. The stimulus excites nerve receptors
only. Neurological Conditions: In extremely rare cases, animals may
have neurological disorders such as epilepsy. You should be certain
that your dog does not suffer from such a disease before using any
type of sonic, or shock stimulus training collar. Also, make sure that
your dog does not suffer from heart disease or any other chronic condi-
tion and be assured that your pet is in generally good health before
using this product.
Please read this manual before operating your system, and keep
it for future reference.

___________________________________________________________________________________________
High Tech Pet Products, Inc. www.hightechpet.com 3
Contents
Included in This Package ...............................4
Before You Start ......................................5
Overview of Main Features ...........................6-7
Turning ON/OFF the Transmitter ........................8
Turning ON/OFF the Collar .............................8
How to Program Your Express Train .....................8
How to Fit the Express Train Collar on Your Dog ..........9
How to Express Train Your Dog to Commands ............9
How to Eliminate Negative Dog Behavior................10
Charging the Transmitter ..............................10
Charging the Collar ...................................10
Troubleshooting......................................11
Customer Support ....................................12

______________________________________________________________________________________
4 www.hightechpet.com High Tech Pet Products, Inc.
Included in This Package
Hand-held Transmitter Rechargeable Receiver Collar
ET-1 Dual Charger
(The charger has two plugs, one
to charge the collar and one to
charge the transmitter.)
Transmitter Antenna
Small Prongs

___________________________________________________________________________________________
High Tech Pet Products, Inc. www.hightechpet.com 5
Before You Start
Make sure all items listed on “Included in This Package” page are in
your package contents. If any of the items are missing, call the High
Tech Pet customer service department at: 1 [phone].
After verifying that all items are complete, do the following.
1. Attach the antenna to the transmitter by screwing it into the top.
2. Unscrew the 2 small screws on the front of the receiver collar to
expose the panel.
3. If you have a small or very short haired dog, unscrew the large
prongs on the collar and replace them with the small prongs
included in your kit.
You are now ready to program your Express TrainTM.

______________________________________________________________________________________
6 www.hightechpet.com High Tech Pet Products, Inc.
HAND HELD RADIO TRANSMITTER
Illuminates when radio signal
is sent to collar.
Instant Stimulus Levels
1 = Mild, 4 = Intense Illuminates when bat-
tery needs charging.
Tone 4: Negative com-
mand tone. Associate
with “No”, or “Stop.
Tones 1-2-3: Positive
command tones. Associate
with “Sit”, “Heel”,, “Come”,
etc.
Selects which collar (1, 2, or 3)
to command. Also used to
program collar for Dog Number.
(See page 8)
Illuminates when bat-
tery is charging.
Overview of Main Features
LEDs Indicate which dog
collar is selected.
DC Charging
Receptacle

___________________________________________________________________________________________
High Tech Pet Products, Inc. www.hightechpet.com 7
Blinks when battery is low.
Depress to turn ON. Depress to turn OFF.
Also used in programming dog number. (See
page 8)
Illuminates when battery is charging.
RECEIVER COLLAR
Overview of Main Features
Blinks when power is ON. Off
when power is OFF. Also used in
programming dog number.

______________________________________________________________________________________
8 www.hightechpet.com High Tech Pet Products, Inc.
Turning ON/OFF the Transmitter
The Transmitter automatically turns ON and OFF when you press any
button.
Turning ON/OFF the Collar
Press the CODE button to turn ON or turn OFF the Collar. The ON
code LED ashes when the Collar is ON.
How to Program Your Express Train
You must rst program the collar to be Dog 1, Dog 2, or Dog 3, as
follows. This allows one transmitter to control up to three differ-
ent dog collars.
1. Turn OFF the collar by pressing the CODE button until the CODE
LED is off.
2. Using both hands, simultaneously press and hold one Dog but-
ton (either 1, 2, or 3) on the transmitter and press and hold
the CODE button on the collar.
3. Keep both buttons pressed for about 5 seconds until the CODE
LED on the collar turns OFF and the collar beeps.
4. If the collar does not beep, repeat steps 1 through 3.
Note: If you have additional collars, repeat the sequence above
using a different Dog Number button. Keep track of which collar
is associated with each dog number. We suggest color coding the
collars with colored tape or rubber bands around the strap.
If a collar ever stops responding to the transmitter, repeat the
programming steps 1 - 4 above.
How to Select Dog 1, 2, or 3 For Training
On the transmitter select the dog number to train by pressing that
button once. Thereafter, until the collar battery is completely
discharged, all commands will be sent to that one collar. Press a
different dog number when you want to start sending commands
to a different collar.
Suggestion: Before starting a new training session, press the Dog
button (1, 2, or 3) to make sure you are sending commands to the
desired collar.

___________________________________________________________________________________________
High Tech Pet Products, Inc. www.hightechpet.com 9
How to Fit the Express Train Collar on Your Dog
The best location for the receiver box is straddling the dog’s windpipe.
The collar should be tted on the dog’s throat so that the contact points
press rmly against the dog’s skin. When properly tted, you should be
able to t a nger or two snugly
in between the contact points and
your dog’s skin, and the receiver/
collar should not move on the dog.
A loose t can allow the receiver/
collar to move around on the dog’s
neck, resulting in inconsistent
stimulus. If the collar is too tight,
the contact points may rub the skin
and cause irritation, inammation,
or infection.
How to Express Train Your Dog to Commands
Place the collar on the dog and make sure the t is snug enough that
the prongs are touching the dog’s skin, but not so snug as to irritate
the dog’s neck.
NOTE: Unlike most training collars manufactured by other pet
companies, that use negative reinforcement to train your dog,
the High Tech Pet Express Train uses positive reinforcement,
in addition to corrective stimulus, for the most comprehensive
dog training. Buttons 1 through 3 are positive reinforcement
tones that are not aggravating to your dog. Your dog will soon
associate each button with the command that you used while
pressing that particular button.
Assign each tone button to the command that you wish your dog to
associate with that particular tone. For instance, if you have assigned
“Tone 1 to the “Sit” command, while commanding your dog to “Sit”, you
will also depress Tone button 1.
Repeat this with each tone button and command that you wish to
teach your dog. Keep your command associations consistent and do
not associate a new command with a particular tone until your dog
has reliably learned the original command.

______________________________________________________________________________________
10 www.hightechpet.com High Tech Pet Products, Inc.
How to Eliminate Negative Dog Behavior
Your High Tech Pet Express Train has 4 stimulus levels, 1 being the
lowest and 4 being the highest.
When your dog exhibits negative behavior, such as digging, for
instance, use the negative tone #4 (which is distinct from the 3 posi-
tive tones) while sharply commanding your dog “NO!” or “STOP!” If the
unwanted behavior continues, activate shock level 1 for a short time
(about 1/2 second). If level 1 does not cause your dog to cease the
undesirable behavior, progress to the more intense shock levels 2-4,
while still commanding the dog with authority.
Some dangerous behaviors may require a higher “Shock” level to get
the dog’s attention, such as chasing the cat or the mailman. You may
need to go as high as “Shock” level 4 for certain negative activities
such as these.
Charging the Transmitter
When the battery is low, the LOW BATT light will illuminate. When this
happens:
1. Plug the charger into a standard AC wall outlet.
2. Remove the rubber protector over the DC Charging Receptacle and
insert one of the charger’s plugs into the Receptacle. The CHRG LED
will illuminate.
3. When charging is completed the CHRG LED will automatically extin-
guish. Disconnect the charging plug from the transmitter.
4. Place the rubber protector back over the DC Charging Receptacle to
eliminate dirt getting into the transmitter.
Charging the Collar
When the battery is low, the LOW BATT light will illuminate. When this
happens:
1. Plug the charger into a standard AC wall outlet.
2. Insert one of the charging plugs into the collar receptacle marked DC
JACK. The CHRG LED will illuminate.
3. When charging is completed the CHRG LED will automatically extin-
guish. Disconnect the charging plug from the collar.

___________________________________________________________________________________________
High Tech Pet Products, Inc. www.hightechpet.com 11
Note: The Charger may remain plugged into the AC wall outlet inde-
nitely. Or you may remove it between charging to conserve a
small amount of electricity.
Troubleshooting
1. My dog is not reacting to the collar:
• Make sure the receiver is turned ON and that you have
programmed your collar to the receiver properly.
• Make sure the collar strap is tight enough so both contact points
are touching the dog’s skin.
• If your dog’s coat is unusually long or thick, you may need to trim
down the hair on the dog’s neck, so both contact points are touch-
ing the skin.
• The battery may be low. Check for Low Battery LED and recharge
if necessary.
2. The transmitter has no range, or stimulation is less when the dog
is farther away.
• Make sure your ngers are not touching the antenna as this may
cause the range to substantially decrease.
• Maximum range for any radio frequency device occurs with at
terrain. Heavy brush, trees, hills or moisture will affect the range of
your unit. For best range, hold the transmitter vertically above your
head, and/or try moving to higher ground.
• Any electrical conductors will affect the range, such as cars, chain-
link dog runs, metal buildings, and radio towers. For best results,
operate away from these structures.
3. My unit is not holding a charge.
• Check to make sure the metal pin inside the charging port is straight
and rm in the center and that the pin is not wobbly, broken or
missing.
• Make sure there is no dirt or debris in the charging port. If there is,
clean the dirt out with a cotton swab and some rubbing alcohol.

High Tech Pet Products, Inc.
2476 Palma Drive, Suite A
Ventura, CA 93003
www.hightechpet.com
Customer Support
If your unit is not working properly and you have exhausted all
procedures in the troubleshooting guide, contact the High Tech Pet
Customer Service at www.hightechpet.com or
1 [phone].
Rev. III – 4/9/2013 dog-training-collar-manual