highwood Hamilton User manual

For information on Care and Cleaning or to Register your
highwood®product, please visit www.highwood-usa.com. PAGE 1 OF 2
TOOLS INCLUDED
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all bolts are started.
Once all bolts are inserted, go back & tighten all the bolts.
Adirondack Collection
Hamilton Bench
Counter Height 4ft
Assembly Guide
HARDWARE INCLUDED
AD-BEN-HM2
09.13.2022
A
1/4-20 x 1.25"
Qty: 2
B
1/4-20 x 1.5"
Qty: 2
C
1/4-20 x 2.0"
Qty: 12
D
1/4-20 x 3.0"
Qty: 2
1) Attach Back to Seat using
(2) C Bolts going through Seat Supports into
the Back.
2) Attach Back to Seat using
(2) A Bolts going through Back Slat into the
Seat.
Seat
Seat Support
Back Slat A
C
C
Seat Support
Back

For information on Care and Cleaning or to Register your
highwood®product, please visit www.highwood-usa.com. PAGE 2 OF 2
AD-BEN-HM2
09.13.2022
4) Attach the Arm Assembly to the Seat using
(2) C bolts.
5) Attach the Arm to the Back using (1) B bolt
and (1) D bolt.
6) Place the Dowel that is in
the Footrest and Rung in the
Dowel hole in the Leg
Assembly.
7) Place the other Leg
Assembly on top of the
Footrest and Rung, lining up
the Dowel with the Dowel
holes.
8) Attach the Arm Assembly
to the Seat using (2) C bolts.
9) Attach the Arm to the
Back using (1) B bolt and (1)
D bolt.
10) With the help of someone, flip the bench in the
upright position.
11) Attach the Footrest and Rung to the Leg
Assembly with (3) C bolts.
12) Repeat 11 on the other side of the bench.
C
D
B
Back
Seat
Footrest
Rung
Dowel
Dowel Hole
Leg Assembly
C
D
B
Back
Seat
Leg Assembly
Leg Assembly
Rung
Footrest
C
C