HIK VISION DS-PKF1-WE User manual

DS-PKF1-WE
Wireless Keyfob
Appearance
1
Enrollment
2
Lock/Unlock Device
Hold + for 3 s to lock.
Hold + for 3 s to unlock
Indicator
Green Light Flashes Once: Power On
Orange Light Flashes: Press Key
Red Light Flashes 4 Times: Device Locked/Device Formaed
Green Light Flashes 4 Times: Device Unlocked
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instrucons for using and managing the Product. Pictures, charts, images and all other informaon hereinaer are for descripon and explanaon only. The informaon contained in the Manual is subject to change,
without noce, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (hps://www.hikvision.com/).
Please use this Manual with the guidance and assistance of professionals trained in supporng the Product.
and other Hikvision's trademarks and logos are the properes of Hikvision in various jurisdicons. Other trademarks and logos menoned are the properes of their respecve owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL
HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU
SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable harmonized
European standards listed under the EMC Direcve 2014/30/EU, the RE
Direcve 2014/53/EU, the RoHS Direcve 2011/65/EU.
replacement of a baery with an incorrect type that can defeat a safeguard (for example, in the case of some lithium
baery types);
– disposal of a baery into fire or a hot oven, or mechanically crushing or cung of a baery, that can result in an
explosion;
– leaving a baery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; and
– a baery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid
or gas
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the European
Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collecon points. For more informaon see:
www.recyclethis.info
2006/66/EC (baery direcve): This product contains a baery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product documentaon for specific baery informaon. The baery is marked
with this symbol, which may include leering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the baery to your supplier or to a designated collecon point. For more informaon see:www.recy-
clethis.info
1. Download and install the App.
2. In the App, tap the icon "+"and scan the QR code or input the serial No. on the peripheral.
3. Trigger the peripheral, and it will be automacally enrolled to the control panel.
Note:
Do not disassemble the device with sharps.
Away Arming
Status Check
Indicator
Disarming
Stay Arming
1
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
EN 50131-1:2006+A1:2009+A2:2017
EN 50131-5-3:2017
EN 50131-3:2009
Security Grade(SG) 2
Environmental Class(EC) II
Cerfied by Teleficaon

1. Dig the groove to disassemble the device. Remove the front panel.
2. Replace the baery.
3. Assemble the front panel and rear panel.
Note: Do not disassemble the device with sharps.
Replace Baery3
CAUTION
RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT
TYPE.
REPLACEMENT OF A BATTERY
WITH AN INCORRECT TYPE THAT
CAN DEFEAT A SAFEGUARD.
CAUTION
CHEMICAL BURNING DANGER
DO NOT SWALLOW THE
BATTERY
KEEP NEW AND USED BATTER-
IES AWAY FROM THE CHILDREN.
IF YOU THINK BATTERIES MIGHT
HAVE BEEN SWALLOWED OR
PLACED INSIDE ANY PART OF
THE BODY, SEEK IMMEDIATE
MEDICAL ATTENTION.
CAUTION
DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUC-
TIONS AND LOCAL REGULATION.
CAUTION
IF THE BATTERY COMPARTMENT
DOES NOT CLOSE SECURELY,
STOP USING THE PRODUCT AND
KEEP IT AWAY FROM CHILDREN.
xxxx
2
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

Funcon
KeyDescripon Indicaon
Away Arming Key Blue LED flashes twice
Stay Configurable Key Blue LED flashes twice
Disarm Disarming Key Green LED flashes twice
ClearAlarm Configurable Key Green LED flashes twice
System Status Configurable Key
AX PRO Arming LED (blue)flashes twice
AX PRO Disarming LED (blue)flashes twice
PA Configurable Key
Successful Operaon: Green LED flashes twice
Failed Operaon: Red LED flashes twice
Medical Configurable Key
Successful Operaon: Green LED flashes twice
Failed Operaon: Red LED flashes twice
Press the key for related operaon
Configurable KeyType
：
I, II, Arm+I, I +II, Arm+Disarm, Disarm+II
Funcon Indicaon
Arming Progress
（EN）
Arming Preparing
：
Green LED flashes 3 mes
Exit Delay：
Green LED flashes once
Armed：
Green LED flashes twice
Arming Failed:
Red LED flashes twice
Fault Detected:
Orange LED flashes
Lock and Unlock
Locked：
Red LED flashes 4 mes
Unlocked：
Green LED flashes 4 mes
1. Press the Arm key, and the AX PRO starts arming
preparing (3 s)，which makes the green LED flash.
2. The AX PRO starts fault check. If there is fault being
detected, the orange LED flashes.
3. The AX PRO enters the exit delay, and the green LED
flashes within the delay duraon that can be set via AX PRO
client.
4. The AX PRO shows the result. Blue LED indicates
successes, and the red LED indicates a failures.
Descripon
1. Press the Disarm +I or Arm +II to lock all keys, and the red
LED flashes for a successful lock that makes no data
transmission between the keyfob and AX PRO.
2. Press the Disarm +I or Arm +II again to unlock all keys,
and the green LED flashes for a successful unlock that makes
data transmission restored between the keyfob and AX
PRO.
Key Operaon
Other Funcons
Funcon
4
5Formang
1. Remove the baery.
2. Hold the Away Arming key, and reinstall the baery at the same me to power the keyfob on . The formang is completed
aer the red LED flashes 3 mes.
3
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China

6
Specificaon
7
Transmission
frequency
868 MHz
Modulaon 2 GFSK
Transmission speed 4.8 kbps
Transmission power 10 dBm
RF range 900 m (open area)
Indicator 3-color LED
Key 4
Baery CR2032 x1 (included)
Baery voltage 3V
Min. voltage 2.1V +/- 5%
Standard baery life 3 years
Operang
temperature
﹣
10 °C to 55 °C (14 °F to 131 °F)
﹣
10 °C to 40 °C (14 °F to 104 °F)
Material
Panel (plasc)+ gasket (rubber)
Dimension 63.2 mm × 35.2 mm × 11.3 mm
Weight 16g
Color White
4
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Set Up with App
Funcon
Enable Keyfob
Linked User
Funcon Key Sengs
Set the keyfob linked user.
Descripon
You can view the baery level of the keyfob.
Tap the buon to enter the sengs page.
Slide to green to enable the keyfob.
Set the single and combinaon funcons of
the I key and the II key
EN cerfied
The communicaon of wireless devices like keyfob was idenfied by the SN number,
which will be encrypted during transmission. The SN number was leading with
character Q to Z, and following 8 digits, like Q02235774. This is a maximum number
of differs of 100,000,000 (10 to the power of 8 [digits]).
PS Type
Low Voltage Level
Consumpon
Classificaon
ACE type Type B
Portable
Quiescent current: 1.17uA
Max current: 40mA
2.45V±0.02V
Type C