HIK VISION UD09022B User manual

Appearance
1
23
Wireless Keyfob
Quick Start Guide
Disambling
Groove
Indicator
Indicator (Red)
Flash Once: Press the Key
Flash Twice: Keyfob Paired
COPYRIGHT ©2018 Hangzhou Hikvision Digital
Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all informaon, including, among others,
wordings, pictures, graphs are the properes of
Hangzhou Hikvision Digital Technology Co., Ltd. or
its subsidiaries (hereinaer referred to be
“Hikvision”). This user manual (hereinaer
referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed,
parally or wholly, by any means, without the
prior wrien permission of Hikvision. Unless
otherwise spulated, Hikvision does not make any
warranes, guarantees or representaons, express
or implied, regarding to the Manual.
About this Manual
This Manual is applicable to Control Panel
The Manual includes instrucons for using and
managing the product. Pictures, charts, images and
all other informaon hereinaer are for descripon
and explanaon only. The informaon contained in
the Manual is subject to change, without noce,
due to firmware updates or other reasons. Please
find the latest version in the company website
(hp://overseas.hikvision.com/en/).
Please use this user manual under the guidance of
professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are
the properes of Hikvision in various
jurisdicons. Other trademarks and logos
menoned below are the properes of their
respecve owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND
FIRMWARE, IS PROVIDED “AS IS”, WITH ALL
FAULTS AND ERRORS, AND HIKVISION MAKES
NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO
EVENT WILL HIKVISION, ITS DIRECTORS,
OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE
TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR
DOCUMENTATION, IN CONNECTION WITH THE
USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET
ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION
SHALL NOT TAKE ANY RESPONSIBILITES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR
OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION,
OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY
TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION.
PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT
IN ORDER TO ENSURE THAT YOUR USE
CONFORMS THE APPLICABLE LAW. HIKVISION
SHALL NOT BE LIABLE IN THE EVENT THAT THIS
PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN
THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Open
Close
Remain Open
(Hold for 1.5s)
By default, the barrier (entrance) remains
open aer pairing completed.
UD09022B

Pair Keyfob
2
7
6
54
2. Assemble the front panel and rear panel by aligning the Indicator groove on the front panel with
the indicator light pipe on the rear panel.
Within 50 cm
Indicator Groove
Indicator Light Pipe
1. Dig the groove to disassemble the device. Remove the front and rear panel. Remove the
insulang strip to power on the device.
Note: Do not disassemble the device with sharps.
Quick Operation
Power On
1
1. Power on the swing barrier.
Aer pairing completed, the keyfob’s
indicator will flash twice.
If pairing failed, the indicator is off.
4. Hold Close for more than 10s, the
keyfob starts pairing.
3. Reboot the swing barrier and make
sure no other swing barriers have paired
with the keyfob within the available
pairing distance.
2. Aer entering the normal mode, set
bit-1 of the four-bit DIP switch on the
master lane control board to ON and
the swing barrier will enter the pairing
mode.
Regulatory Information
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the RE Direcve
2014/53/EU, the EMC Direcve 2014/30/EU, the
RoHS Direcve 2011/65/EU.
2012/19/EU (WEEE direcve): Products marked with this symbol
cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to
your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collecon points. For
more informaon see: www.recyclethis.info
2006/66/EC (baery direcve): This product
contains a baery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentaon for specific
baery informaon. The baery is marked with
this symbol, which may include leering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the baery to your
supplier or to a designated collecon point. For
more informaon see: www.recyclethis.info
FCC Conditions
This device complies with part 15 of the FCC Rules. Operaon is
subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operaon.
EU Conformity Statement
FCC Information
Please take aenon that changes or modificaon not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with
the instrucons, may cause harmful interference to radio
communicaons. However, there is no guarantee that interference
will not occur in a parcular installaon. If this equipment does
cause harmful interference to radio or television recepon, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separaon between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for
help.
(1) 이기기는 가정용으로 전자파적합등록을 한기기로서
주거지역에서는 물론 모든 지역에서 사용할 수있습니다.
(2) 당해 무선설비는 전파혼신 가능성이 있으므로
인명안전과 관련된 서비스는 할수없음。
You can also pair the keyfob via
iVMS-4200 control client. For details,
see Remote Configuraon in User
Manual of Swing Barrier.