HIK VISION DS-2CC1181P(N)(-A) User manual

Day Night Box Camera·User Manual
0
0
Day Night Box Camera
User Manual

Day Night Box Camera·User Manual
1
1
Thank you for purchasing our product. If there are any questions,
or requests, please do not hesitate to contact the dealer.
This manual applies to following cameras:
Models
Models
DS-2CC1181P(N)(-A)
DS-2CC1191P(N)(-A)
DS-2CC11A1P(N)(-A)
DS-2CC1112P(N)(-A)
DS-2CC1172P(N)(-A)
DS-2CC1182P(N)(-A)
DS-2CC1192P(N)(-A)
DS-2CC11A2P(N)
DS-2CC1183P(N)-A(-C)
DS-2CC1193P(N)-A(-C)
DS-2CC11A3P(N)-A(-C)
DS-2CC1185P(N)-A(-C)
DS-2CC1195P(N)-A(-C)
DS-2CC11A5P(N)-A(-C)
DS-2CC1187P(N)-A(-C)
DS-2CC1197P(N)-A(-C)
DS-2CC11A7P(N)-A(-C)
DS-2CC1188P(N)-A(-C)
DS-2CC1198P(N)-A(-C)
DS-2CC11A8P(N)-A(-C)
This manual may contain several technical incorrect places or
printing errors, and the content is subject to change without notice.
The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures
described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the
performance or reliability of the security or signaling aspects of

Day Night Box Camera·User Manual
2
2
this product. UL has only tested for fire, shock or casualty hazards
as outlined in UL’s Standard(s) for Safety, UL60950-1. UL
Certification does not cover the performance or reliability of the
security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS
WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY
OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”

Day Night Box Camera·User Manual
3
3
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies w ith part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied
accessories too are marked with "CE" and comply
therefore with the applicable harmonized
European standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC.

Day Night Box Camera·User Manual
4
4
2002/96/EC (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper
recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at
designated collection points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked w ith this
symbol, which may include lettering to indicate cadmium (Cd),
lead (Pb), or mercury (Hg). For proper recycling, return the battery
to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.

Day Night Box Camera·User Manual
5
5
Safety Instruction
These instructions are intended to ensure that user can use the
product correctly to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the
warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the
cautions are neglected.
Warnings
Please adopt the power adapter which can meet the safety
extra low voltage (SELV) request. And source with DC 12V or
AC 24V (depending on models) according to the IEC60950-1
and Limited Power Source standard.
If the product does not work properly, please contact your
dealer or the nearest service center. Never attempt to
disassemble the camera yourself. (We shall not assume any
Warnings Follow these
safeguards to prevent
serious injury or death.
Cautions Follow these
precautions to prevent
potential injury or material
damage.

Day Night Box Camera·User Manual
6
6
responsibility for problems caused by unauthorized repair or
maintenance.)
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture.
This installation should be made by a qualified service person
and should conform to all local codes.
Please install blackouts equipment into the power supply
circuit for convenient supply interruption.
Please make sure that the ceiling can support more than 50(N)
Newton gravities if the camera is fixed to the ceiling.
Cautions
Make sure the power supply voltage is correct before using the
camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is
necessary, use a clean cloth with a bit of ethanol and wipe it
gently. If the camera w ill not be used for an extended period of
time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfunction however), and affecting the endurance of sensor
at the same time.

Day Night Box Camera·User Manual
7
7
The sensor may be burned out by a laser beam, so when any
laser equipment is being used, make sure that the surface of
the sensor will not be exposed to the laser beam.
Do not place the camera in extremely hot or cold temperatures
(the operating temperature should be between -10°C ~ 60°C ,
dusty or damp locations, and do not expose it to high
electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a
proper operating environment.
Do not let water and any liquid flow into the camera.
While shipping, the camera should be packed in its original
packing, or packing of the same texture.
Improper use or replacement of the battery may result in
hazard of explosion. Replace with the same or equivalent type
only. Dispose of used batteries according to the instructions
provided by the battery manufacturer.

Day Night Box Camera·User Manual
8
8
Table of Contents
1 Introduction ......................................................................10
1.1 Product Features .................................................... 10
1.2 Overview ............................................................... 13
1.2.1 Rear Panel (A)............................................... 16
1.2.2 Rear Panel (B)............................................... 17
1.2.3 Rear Panel (C)............................................... 18
1.2.4 Rear Panel (D) .............................................. 22
1.2.5 Rear Panel (E) ............................................... 26
1.2.6 Rear Panel (F) ............................................... 28
2 Installation........................................................................30
2.1 Wall Mounting ........................................................ 30
2.2 Wiring .................................................................... 37
3 Menu Operations...............................................................39
3.1 Menu Description (A).............................................. 39
3.1.1 Menu Overview ............................................. 39
3.1.2 Lens Settings ................................................ 40
3.1.3 Shutter/AGC Setting ..................................... 42
3.1.4 White Balance Setting ................................... 45
3.1.5 Backlight Setting ........................................... 48
3.1.6 Picture Adjust Setting.................................... 48
3.1.7 ATR Setting ................................................... 50
3.1.8 Motion Detection Setting ............................... 50
3.1.9 Privacy Mask Setting ..................................... 53
3.1.10 Day/Night Setting ....................................... 54
3.1.11 NR Setting .................................................. 56
3.1.12 Camera ID Setting ...................................... 57
3.1.13 SYNC Setting .............................................. 59

Day Night Box Camera·User Manual
9
9
3.1.14 Language Setting ........................................ 59
3.1.15 Camera Reset Setting.................................. 59
3.1.16 Defective Pixel Correct Setting..................... 60
3.1.17 RS-485 Setting ........................................... 60
3.1.18 Save All/Exit ............................................... 60
3.2 Menu Description (B).............................................. 61
3.2.1 Menu Overview ............................................. 61
3.2.2 Scene ........................................................... 62
3.2.3 Exposure....................................................... 62
3.2.4 Funtion ......................................................... 72
3.2.5 System ......................................................... 81
3.2.6 Language ...................................................... 85
3.2.7 Exit ............................................................... 85
Appendix...............................................................................87
1 Glossary ................................................................... 87
2 Troubleshooting......................................................... 91
3 Technical Maintenance............................................... 94

Day Night Box Camera·User Manual
10
10
1Introduction
1.1 Product Features
This camera adopts high performance sensor and advanced print
circuit board design techno logy. It possesses of high resolution,
low distortion, and low noise features, etc. It is extremely suitable
for surveillance system and image process system.
The features of DS-2CC1181/1191/11A1P(N)(-A) are as follows:
Adopt high performance SONY CCD, and supply high definitio n
and clear image
Low illumination
Support day and night auto switch
Support OSD menu controlling, enable user to configure the
detailed parameters
Support digital noise reduction to get clear and fine image
Support digital w ide dynamic range function
Support eclipse
High Signal No ise Ratio (SNR) to ensure clear and pleased
image
Support auto iris
Convenient back focus adjustment

Day Night Box Camera·User Manual
11
11
The features of DS-2CC1112/1172/1182/1192P(N)(-A) and
DS-2CC11A2P(N) are as follows:
Adopt high performance SONY CCD, and supply high definition
and clear image
Low illumination, 0.001Lux@F1.2（F1.2，AGC ON）
Support day and night auto switch
Support digital noise reduction to get clear and fine image
Support digital w ide dynamic range function
High Signal No ise Ratio (SNR) to ensure clear and pleased
image
Support auto iris
Convenient back focus adjustment
The features of
DS-2CC1183/1193/11A3/1185/1195/11A5/1187/1197/11A7/118
8/1198/11A8P(N)-A(-C) are as follows:
Adopt high performance SONY CCD, and supply high definition
and clear image
Low illumination, color 0.001Lux@F1.2, B/W 0.0001Lux@F1.2
Support day and night auto switch, IR cut filter auto switch
Support OSD menu controlling, enable user to configure the
detailed parameters
Support 3D digital noise reduction to get clear and fine image
Support digital w ide dynamic range function
Smart IR function

Day Night Box Camera·User Manual
12
12
Support electronic image stabilization (EIS) to get steady and
clear image
Support eclipse
Support BLC with programmable BLC area
Support auto white balance with high color rendition
Support auto electronic shutter control to adapt to different
environments
Support auto gain control, adaptive brightness
High Signal No ise Ratio (SNR) to ensure clear and pleased
image
Support auto iris
Convenient back focus adjustment
Super wide dynamic range. The range is larger than 75dB.
High light compensation
Notes:
Only the DS-2CC1187/1197/11A7P(N)-A(-C) models
support the super wide dynamic range function.
The DS-2CC1187/1197/11A7P(N)-A(-C) models don’t
support digital wide dynamic range function.
Only the DS-2CC1188/1198/11A8P(N)-A(-C) support the
high light compensation.
The DS-2CC1188/1198/11A8P(N)-A(-C) models don’t
support smart IR function.

Day Night Box Camera·User Manual
13
13
1.2 Overview
The appearances of the cameras are as follows:
Figure 1-1 Overview
1-Lock Screws: available both on top and bottom for ceiling
mounting and wall mounting respectively.
2-Auto-Iris Drive Interface: It connects the lens to the auto
drive circuit in the camera which outputs direct current to drive
the iris.

Day Night Box Camera·User Manual
14
14
Figure 1-2 Side View
3-Lens: the optical lens adopted for the box camera (not provided.
Please purchase a compatible lens for the camera).
4-Back Focus Lever: It is set to optimum status by default. You
can also manually pull and adjust it for more accuracy focus.
Notes:
The back focus has been configured to optimum value by default.
But it can be adjusted slightly to coordinate with different lens.
Adjust the back focus lever when the lens connector has been
confirmed but the lens is still not focalized.
The setting steps are as follows:
Steps:
1. Rotate the lens to the camera tightly.

Day Night Box Camera·User Manual
15
15
2. Loosen the set screw of back focus lever.
3. Adjust the stick left and right until lens gets clear image
4. Lock the set screw.
Video
DC
1
Power
Damp-
2
NC
Damp+
3
Video
Driver+
4
GND
Driver-
Figure 1-3 Pins of the Auto Iris Interface
The auto iris interface is composed of four square pins as shown in
Figure 1-3.
Power, Video and GND pins are used in video driven mode.
Damp+, damp-, drive+ and drive- pins are used in DC driven
mode.
There are two driven modes of auto iris as fo llows:
Video Driven: The camera inputs the video signal level into
lens interior, and internal drive circuit of the lens outputs
control voltage for the electronic motor to adjust lens iris.
Direct Current Driven: There is a drive circuit for electronic
motor of the iris in the camera. The drive circuit can directly
output DC control voltage to control electronic motor.

Day Night Box Camera·User Manual
16
16
Note: DS-2CC1181/1191/11A1P(N)(-A) models don’t support VD
driven mode.
1.2.1 Rear Panel (A)
The rear panel of DS-2CC1181/1191/11A1P（N）models is shown
as follows.
1 2
5
4 3
Figure 1-4 Rear Panel （12V）
Table 1-1 Rear Panel Description
No.
Items
Description
1
Joystick
Used to control OSD
2
PWR Indicator
The indicator is on,
when the power is up.

Day Night Box Camera·User Manual
17
17
No.
Items
Description
3
Power Interface
12V DC
4
Video Output
5
Grounding Screw
1.2.2 Rear Panel (B)
The rear panel of DS-2CC1181/1191/11A1P（N）-A models is shown
as follows.
Figure 1-5 Rear Panel （12V and 24V）

Day Night Box Camera·User Manual
18
18
Table 1-2 Rear Panel Description
No.
Items
Description
1
Joystick
Used to control OSD
2
Alarm OUT, IN , GND
Interface
Support alarm in and
out.
3
D/N Interface
Used to switch day/night
mode externally
4
RS-485 Interface
Used for remote control
by DVR, keyboard, etc.
5
PWR Indicator
The indicator is on, when
the power is up.
6
Power Interface
Support both 12V DC and
24V AC.
7
Video Output
8
Grounding Screw
1.2.3 Rear Panel (C)
The rear panel of DS-2CC1112/1172/1182/1192/11A2P(N)
models is shown as follows.

Day Night Box Camera·User Manual
19
19
1 2
3
4
56
7
Figure 1-6 Rear Panel
Table 1-3 Rear Panel Description
No.
Items
Description
1
Video Output
1Vp-p Composite
Output (75Ω/BNC)
2
Power Interface
12V DC
3
Grounding Screw
4
PWR Indicator
The indicator is on,
when the power is up.
5
Dial-switch
Used for adjust the