HIK VISION 2SR8141IXS Series User manual

Speed Dome
Quick Start Guide

Radar PTZ Camera·Quick Start Guide
i
Quick Start Guide
© 2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
This Manual is the property of Hangzhou Hikvision Digital Technology Co., Ltd. or its
affiliates (hereinafter referred to as “Hikvision”), and it cannot be reproduced, changed,
translated, or distributed, partially or wholly, by any means, without the prior written
permission of Hikvision. Unless otherwise expressly stated herein, Hikvision does not
make any warranties, guarantees or representations, express or implied, regarding to
the Manual, any information contained herein.
About this Manual
The Manual includes instructions for using and managing Radar PTZ Camera. Pictures,
charts, images and all other information hereinafter are for description and explanation
only. The information contained in the Manual is subject to change, without notice, due
to firmware updates or other reasons. Please find the latest version of this Manual at
the Hikvision website (http://www.hikvision.com).
Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE
PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS” AND “WITH ALL FAULTS AND ERRORS”. HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE.
THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION
BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF

Radar PTZ Camera·Quick Start Guide
ii
THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND
YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT
FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL
OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS
ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW,
THE LATER PREVAILS.
050520200411

Radar PTZ Camera·Quick Start Guide
iii
Regulatory Information
FCC Information
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
cause undesired operation
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked
with "CE" and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information, see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot
be disposed of as unsorted municipal waste in the European Union. See the
product documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier
or to a designated collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (A)/NMB-3(A) standards requirements.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may

Radar PTZ Camera·Quick Start Guide
iv
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
In the use of the product, you must be in strict compliance with the electrical safety
regulations of the nation and region.
Refer to technical specifications for detailed information.
Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 24 VAC according to the IEC60950-1 standard. Refer to technical
specifications for detailed information.
Do not connect several devices to one power adapter as adapter overload may cause
over-heating or a fire hazard.
Make sure that the plug is firmly connected to the power socket.
Make sure that the power has been disconnected before you wire, install or dismantle
the speed dome.
When the product is mounted on wall or ceiling, the device shall be firmly fixed.
If smoke, odor or noise rise from the device, turn off the power at once and unplug
the power cable, and then contact the service center.
If the product does not work properly, contact your dealer or the nearest service
center. Never attempt to disassemble the speed dome yourself. (We shall not assume
any responsibility for problems caused by unauthorized repair or maintenance.)
Cautions
CAUTION: Hot parts! Burned fingers when handling the parts. Wait one-half hour
after switching off before handling parts. This sticker is to
indicate that the marked item can be hot and should not be
touched without taking care. For device with this sticker, this
Warnings Follow
these safeguards to
prevent serious
injury or death.
Cautions Follow these
precautions to prevent
potential injury or
material damage.

Radar PTZ Camera·Quick Start Guide
v
device is intended for installation in a restricted access location, access can only be
gained by service persons or by users who have been instructed about the reasons for
the restrictions applied to the location and about any precautions that shall be taken.
The high beam of IR supplement light at the distance of 200 mm is classified as Risk
Group 1 (RG1). The white alarm light in solid mode is classified as Risk Group 2 (RG2).
The minimum safe distance is approximately 1.5 m away from the device.
Possibly hazardous optical radiation emitted from this product may be harmful to the
eyes. Do not stare at operating light source.
If appropriate shielding or eye protection is not available, turn on the light only at a
safe distance or in the area that is not directly exposed to the light when installing or
maintaining the device.
If the speed dome fails to synchronize local time with that of the network, you need
to set up speed dome time manually. Visit the speed dome (via web browser or client
software) and enter system settings interface for time settings.
Make sure the power supply voltage is correct before using the speed dome.
Do not drop the speed dome or subject it to physical shock, and do not expose it to
high electromagnetism radiation. Avoid installation on vibrations surface or places
subject to shock (ignorance can cause device damage).
Do not touch senor modules with fingers. If cleaning is necessary, use clean cloth with
a bit of ethanol and wipe it gently. If the speed dome will not be used for an extended
period, replace the lens cap to protect the sensor from dirt.
Do not aim the speed dome at the sun or extra bright places. Blooming or smearing
may occur otherwise (which is not a malfunction), and affect the endurance of sensor
at the same time.
The sensor may be burned out by a laser beam, so when any laser equipment is in
using, make sure that the surface of sensor will not be exposed to the laser beam.
Do not place the speed dome in extremely hot (the operating temperature shall be
-40°C to 70°C (-40°F to 158°F)), cold, dusty or damp locations, and do not expose it to
high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for operating environment.
Keep the speed dome away from liquid while in use.
While in delivery, the speed dome shall be packed in its original packing, or packing of
the same texture.
This equipment is not suitable for use in locations where children are likely to be
present.
CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions
ATTENTION: IL Y A RISQUE D'EXPLOSION SI LA BATTERIE EST REMPLACÉE PAR UNE
BATTERIE DE TYPE INCORRECT. METTRE AU REBUT LES BATTERIES USAGÉES
CONFORMÉMENT AUX INSTRUCTIONS
Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the
battery, which may result in an explosion.

Radar PTZ Camera·Quick Start Guide
vi
Do not leave the battery in an extremely high temperature surrounding environment,
which may result in an explosion or the leakage of flammable liquid or gas.
Do not subject the battery to extremely low air pressure, which may result in an
explosion or the leakage of flammable liquid or gas.
Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to
the instructions provided by the battery manufacturer.
L’utilisation ou le remplacement inadéquats de la pile peuvent entraîner un risque
d’explosion. Remplacez-la par le même type ou l’équivalent du même type seulement.
Jetez les piles usagées conformément aux directives fournies par le fabricant de la
pile.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.
Note : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

Radar PTZ Camera·Quick Start Guide
vii
Table of Contents
1 Overview......................................................................................................1
1.1 Radar PTZ Camera Overview................................................................................1
1.2 Cable Interfaces...................................................................................................1
1.3 Alarm Output ......................................................................................................2
2 Installation ...................................................................................................3
2.1 Wall Mounting.....................................................................................................3
2.2 Pendant Mounting...............................................................................................7
2.3 Installation of Network Cable Waterproof Jacket ..................................................9
2.4 Installation of Water-proof Tape.........................................................................10
2.5 Protective Measures for Outdoor Installation .....................................................12
3 Activate and Access Network Camera......................................................... 12

Radar PTZ Camera·Quick Start Guide
1
1Overview
Refer to the figure below for the cable interfaces of the device and the location of
memory card slot.
1.1 Radar PTZ Camera Overview
The figures below are for reference only, refer to the actual product as the standard.
Memory Card
Radar Module
Figure 1-1 Overview of Radar PTZ Camera
1.2 Cable Interfaces
The cable interfaces of the device are shown below. The cables are distinguished by
different colors. Refer to the labels attached on the cables for identification.
Notes:
The cables vary depending on different models.
Make sure the device is power-off before you connect the cables.
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4
for details.

Radar PTZ Camera·Quick Start Guide
2
Power Cord
RS-485
Network Cable
Audio & Alarm
Figure 1-2 Cable Interfaces
1.3 Alarm Output
Alarm output is shown below.
Relay Output
OUT (n) DC
OUT (n)
Direct load
+
-Relay Output
OUT (n)
OUT (n)
DC 30V
1A
Power Supply
GND Output
~220V AC
FireWire Zero
Line
JQC-3FG
Relay
(10A 250VAC)
Figure 1-3 Alarm Output

Radar PTZ Camera·Quick Start Guide
3
2Installation
Before you start:
Check the package contents and make sure that the device in the package is in good
condition and all the assembly parts are included.
Notes:
For better detection effect, it is recommended to install the device in spacious area
without blocking.
The tilt angle of the device should be less than 5°.
The recommended mounting height is 4 to 5 m.
The radar module should directly face to the target.
Do not touch the bubble directly by hand. The image blurs otherwise.
Do not power the speed dome up until the installation is finished. To ensure the
safety of personnel and equipment, all the installation steps should be done with
power supply off.
Do not drag the speed dome with its waterproof cables; otherwise the waterproof
performance is affected.
Figure 2-1 Do Not Drag the Cables
2.1 Wall Mounting
Notes:

Radar PTZ Camera·Quick Start Guide
4
For cement wall, you need to use the expansion screw to fix the bracket. The
mounting hole of the expansion pipe on the wall should align with the mounting
hole on the bracket.
For wooden wall, you can just use the self-tapping screw to fix the bracket.
Make sure that the wall is strong enough to withstand more than eight times the
weight of the speed dome and the accessories.
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and 2.4
for details.
Steps:
1. Install the bracket.
1) Drill four screw holes in the wall according to the holes on the bracket, and
then insert four expansion screws into the mounting holes.
2) Attach the bracket to the wall by aligning the four screw holes on the bracket
with four expansion screws on the wall.
3) Secure the bracket with four sets of hex nuts and washers.
Figure 2-2 Install the Bracket
2. Use the wrench to fix head cover on the bracket.
Note:
Make sure the radar module is directly face to the moving target.

Radar PTZ Camera·Quick Start Guide
5
Radar Detection Range
Figure 2-3 Install Head Cover
3. Hook the speed dome to the bracket with supplied safety rope.
Figure 2-4 Use Safety Rope to Hook the Camera to the Bracket

Radar PTZ Camera·Quick Start Guide
6
4. Route and connect the cables through the head cover and bracket.
Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and
2.4 for details.
Figure 2-5 Connect the Cables
5. Align the speed dome with the head cover. Use the wrench to tighten the lock
screws.
Lock Screws
Figure 2-6 Secure the Speed Dome

Radar PTZ Camera·Quick Start Guide
7
2.2 Pendant Mounting
Steps:
1. Drill four holes on the ceiling to match those on the pendant mount bracket.
Figure 2-7 Pendant Mount
2. Route the cables through the bracket, then align the base plate to the holes and fix
it to the ceiling with four screws.
Figure 2-8 Route the Cables and Fix the Bracket on the Ceiling
3. Use the wrench to fix the head cover on the bracket.
Note:
Make sure the radar module can directly face to the moving target.

Radar PTZ Camera·Quick Start Guide
8
Radar Detection Range
Figure 2-9 Fix the Head Cover
4. Hook the speed dome to the bracket with supplied safety rope.
Figure 2-10 Use Safety Rope to Hook the Camera with Bracket
5. Connect the cables, and align the speed dome with the head cover, using wrench to
tighten the screws on the head cover.

Radar PTZ Camera·Quick Start Guide
9
Note:
Water-proof treatment is required for cable connectors. Refer to Section 2.3 and
2.4 for details.
Lock Screws
Figure 2-11 Finish the Installation
2.3 Installation of Network Cable Waterproof Jacket
Purpose:
If the camera is installed outdoor, you should use the waterproof accessory or tapes to
waterproof the cables. Otherwise the cables might get wet or a short circuit occurs.
⑥
④
②③
①④⑤⑥
③①
Align
Figure 2-12 Install Waterproof Jacket
Steps:
1.Feed the network cable through ①and ③ in order.
2.Fix ② on the network cable between ①and ③.

Radar PTZ Camera·Quick Start Guide
10
3.Place ⑤onto the end of ⑥, and plug the RJ45 male connector into RJ45 female
connector.
4.Screw ③to ⑥clockwise.
5.Push ②into ③.
6.Secure ①with the ③in clockwise direction.
2.4 Installation of Water-proof Tape
Purpose:
If the camera is installed outdoor, you can use supplied water-proof tape to protect
cable connectors and unused cables after the camera is secured on the installation
surface.
Steps:
1. Tear off the yellow release paper on the back of the water-proof tape.
2. Stretch the water-proof tape to reach twice the initial length.
Stretch
Stretch
Initial Length
Waterproof Tape Length After Stretching
Figure 2-13 Stretch the Water-proof Tape
3. Wrap the water-proof tape around the cable connector tightly as the figure below.
Cable Connector
Figure 2-14 Wrap the Water-proof Tape

Radar PTZ Camera·Quick Start Guide
11
Note:
Make sure that all naked wires are all firmly wrapped in the water-proof tape.
4. Press the tape on both ends of the connector to make sure no water can get in as the
figure below.
Press
Press
Press
Press
Figure 2-15 Press the Water-proof Tape
5. Wrap the water-proof tape around the remaining unused cables tightly as the figure
below.
Figure 2-16 Wrap the Unused Cables
Note:
Make sure that all naked wires are all firmly wrapped in the water-proof tape.
6. Press the tape to make sure no water can get in as the figure below.
Press
Press
Press
Press
Figure 2-17 Press the Water-proof Tape

Radar PTZ Camera·Quick Start Guide
12
2.5 Protective Measures for Outdoor Installation
If the device is installed outdoors, necessary protective measures should be taken to
ensure safety. Scan the following QR code to get protective measures for outdoor
installation.
3Activate and Access Network Camera
Scan the QR code to get Activate and V isit Network Camera. Note that mobile data
charges may apply if Wi-Fi is unavailable.