HIK VISION HWP-N2404IH-DE3 User manual

Network Speed Dome
User Manual

Network Speed Dome User Manual
i
Legal Information
© 2021 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information
contained in the Manual is subject to change, without notice, due to firmware updates or other
reasons. Please find the latest version in the company website (https://www.hi-watch.eu/).
Please use this Manual with the guidance and assistance of professionals trained in supporting the
Product.
Trademarks
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND
"WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR
A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION,
WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK,
VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW.
ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT
INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR
PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED

Network Speed Dome User Manual
ii
TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN
RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.

Network Speed Dome User Manual
iii
Contents
Chapter 1 Overview....................................................................................................................1
1.1 Product Introduction.............................................................................................................1
1.2 Key Function ..........................................................................................................................1
1.3 System Requirement.............................................................................................................1
Chapter 2 Device Activation and Accessing .................................................................................2
2.1 Activate Device......................................................................................................................2
2.1.1 Activate Device via Web Browser..............................................................................2
2.1.2 Activate via SADP .......................................................................................................3
2.2 Access Device via Web Browser ...........................................................................................4
2.2.1 Plug-in Installation .....................................................................................................4
2.2.2 Admin Password Recovery ........................................................................................5
2.2.3 Illegal Login Lock ........................................................................................................5
Chapter 3 PTZ.............................................................................................................................7
3.1 PTZ Control ............................................................................................................................7
3.2 Set Preset...............................................................................................................................9
3.2.1 Special Presets..........................................................................................................10
3.3 Set Patrol Scan.....................................................................................................................10
3.3.1 Set One-Touch Patrol ...............................................................................................11
3.4 Set Pattern Scan ..................................................................................................................12
3.5 Set Limit ...............................................................................................................................12
3.6 Set Initial Position ...............................................................................................................13
3.7 Set Scheduled Tasks ............................................................................................................13
3.8 Set Park Action ....................................................................................................................14
3.8.1 Set One-Touch Park..................................................................................................14
3.9 Set Privacy Mask..................................................................................................................14
3.10 Set Smart Tracking.............................................................................................................15
3.11 Set Power Off Memory .....................................................................................................16
3.12 Set PTZ Priority ..................................................................................................................17
3.13 Set Rapid Focus..................................................................................................................17

Network Speed Dome User Manual
iv
Chapter 4 Live View.................................................................................................................. 19
4.1 Live View Parameters..........................................................................................................19
4.1.1 Start and Stop Live View ..........................................................................................19
4.1.2 Aspect Ratio..............................................................................................................19
4.1.3 Live View Stream Type.............................................................................................19
4.1.4 Quick Set Live View ..................................................................................................19
4.1.5 Select the Third-Party Plug-in ..................................................................................19
4.1.6 Count Pixel................................................................................................................20
4.1.7 Start Digital Zoom ....................................................................................................20
4.1.8 Conduct Regional Focus ...........................................................................................20
4.1.9 Conduct Regional Exposure .....................................................................................20
4.1.10 Light ........................................................................................................................21
4.1.11 Lens Initialization ...................................................................................................21
4.1.12 Track Manually .......................................................................................................21
4.1.13 Conduct 3D Positioning..........................................................................................21
4.1.14 Undervoltage Alarm...............................................................................................22
4.1.15 Display Target Information on Live View ..............................................................22
4.2 Set Transmission Parameters..............................................................................................22
4.3 OSD Menu............................................................................................................................23
Chapter 5 Video and Audio....................................................................................................... 24
5.1 Video Settings......................................................................................................................24
5.1.1 Stream Type..............................................................................................................24
5.1.2 Video Type................................................................................................................24
5.1.3 Resolution.................................................................................................................25
5.1.4 Bitrate Type and Max. Bitrate .................................................................................25
5.1.5 Video Quality............................................................................................................25
5.1.6 Frame Rate ...............................................................................................................25
5.1.7 Video Encoding.........................................................................................................25
5.1.8 I-Frame Interval ........................................................................................................27
5.2 Audio Settings......................................................................................................................27
5.2.1 Audio Input...............................................................................................................27

Network Speed Dome User Manual
v
5.2.2 Environmental Noise Filter ...................................................................................... 28
5.3 Two-way Audio....................................................................................................................28
5.4 ROI........................................................................................................................................28
5.4.1 Set ROI ......................................................................................................................28
5.5 Display Info. on Stream.......................................................................................................29
5.6 Display Settings ...................................................................................................................29
5.6.1 Scene Mode ..............................................................................................................30
5.6.2 Image Parameters Switch ........................................................................................33
5.6.3 Mirror........................................................................................................................33
5.6.4 Video Standard.........................................................................................................34
5.6.5 Zoom Limit................................................................................................................34
5.7 OSD ......................................................................................................................................34
5.8 Demist..................................................................................................................................34
Chapter 6 Video Recording and Picture Capture........................................................................36
6.1 Storage Settings...................................................................................................................36
6.1.1 Memory Card............................................................................................................36
6.1.2 Set FTP ......................................................................................................................39
6.1.3 Set NAS .....................................................................................................................39
6.1.4 Set Cloud Storage .....................................................................................................40
6.2 Video Recording ..................................................................................................................41
6.2.1 Record Automatically...............................................................................................41
6.2.2 Record Manually ......................................................................................................42
6.2.3 Playback and Download Video ................................................................................42
6.3 Capture Configuration.........................................................................................................43
6.3.1 Capture Automatically .............................................................................................43
6.3.2 Capture Manually.....................................................................................................43
6.3.3 View and Download Picture ....................................................................................44
Chapter 7 Event and Alarm.......................................................................................................45
7.1 Basic Event...........................................................................................................................45
7.1.1 Set Motion Detection...............................................................................................45
7.1.2 Set Video Tampering Alarm .....................................................................................47

Network Speed Dome User Manual
vi
7.1.3 Set Exception Alarm .................................................................................................48
7.1.4 Set Alarm Input ........................................................................................................49
7.2 Smart Event .........................................................................................................................49
7.2.1 Detect Audio Exception............................................................................................49
7.2.2 Set Face Detection....................................................................................................50
7.2.3 Set Intrusion Detection ............................................................................................51
7.2.4 Set Line Crossing Detection .....................................................................................52
7.2.5 Set Region Entrance Detection ................................................................................54
7.2.6 Set Region Exiting Detection....................................................................................55
7.2.7 Set Object Removal Detection.................................................................................56
7.2.8 Set Unattended Baggage Detection ........................................................................58
Chapter 8 Arming Schedule and Alarm Linkage ......................................................................... 60
8.1 Set Arming Schedule ...........................................................................................................60
8.2 Linkage Method Settings.....................................................................................................60
8.2.1 Trigger Alarm Output ...............................................................................................60
8.2.2 FTP/NAS/Memory Card Uploading .........................................................................62
8.2.3 Send Email ................................................................................................................62
8.2.4 Notify Surveillance Center .......................................................................................63
8.2.5 Smart Tracking..........................................................................................................63
8.2.6 Trigger Recording .....................................................................................................63
Chapter 9 Network Settings...................................................................................................... 64
9.1 TCP/IP ..................................................................................................................................64
9.1.1 Multicast................................................................................................................... 65
9.1.2 Multicast Discovery..................................................................................................65
9.2 Port.......................................................................................................................................66
9.3 Port Mapping.......................................................................................................................67
9.3.1 Set Auto Port Mapping.............................................................................................67
9.3.2 Set Manual Port Mapping........................................................................................67
9.3.3 Set Port Mapping on Router ....................................................................................68
9.4 SNMP ...................................................................................................................................69
9.5 Access to Device via Domain Name....................................................................................69

Network Speed Dome User Manual
vii
9.6 Access to Device via PPPoE Dial Up Connection ................................................................70
9.7 Accessing via Mobile Client.................................................................................................71
9.7.1 Enable Hik-Connect Service on Camera ..................................................................71
9.7.2 Set Up Hik-Connect ..................................................................................................72
9.7.3 Add Camera to Hik-Connect ....................................................................................72
9.8 Wi-Fi.....................................................................................................................................73
9.8.1 Connect Device to Wi-Fi...........................................................................................73
9.9 Set ISUP................................................................................................................................74
9.10 Set Open Network Video Interface...................................................................................74
9.11 Set Network Service ..........................................................................................................75
9.12 Set Alarm Server................................................................................................................76
9.13 TCP Acceleration................................................................................................................76
9.14 Traffic Shaping...................................................................................................................76
9.15 Set SRTP .............................................................................................................................76
Chapter 10 System and Security ............................................................................................... 78
10.1 View Device Information ..................................................................................................78
10.2 Restore and Default ..........................................................................................................78
10.3 Search and Manage Log ....................................................................................................78
10.4 Import and Export Configuration File...............................................................................79
10.5 Export Diagnose Information............................................................................................79
10.6 Reboot ...............................................................................................................................79
10.7 Upgrade .............................................................................................................................79
10.8 View Open Source Software License ................................................................................80
10.9 Set Live View Connection..................................................................................................80
10.10 Time and Date .................................................................................................................80
10.10.1 Synchronize Time Manually.................................................................................80
10.10.2 Set NTP Server ......................................................................................................80
10.10.3 Set DST..................................................................................................................81
10.11 Set RS-485........................................................................................................................81
10.12 Security ............................................................................................................................82
10.12.1 Authentication .....................................................................................................82

Network Speed Dome User Manual
viii
10.12.2 Set IP Address Filter .............................................................................................82
10.12.3 Set HTTPS..............................................................................................................83
10.12.4 Security Audit Log ................................................................................................83
10.12.5 Set QoS .................................................................................................................84
10.12.6 Set IEEE 802.1X .....................................................................................................85
10.12.7 Certificate Management ......................................................................................85
10.12.8 Control Timeout Settings .....................................................................................88
10.12.9 User and Account .................................................................................................88
A. Device Command .................................................................................................................90
B. Device Communication Matrix .............................................................................................91

Network Speed Dome User Manual
1
Chapter 1 Overview
1.1 Product Introduction
The Network Speed Dome is an integration of the HD zoom camera and the PT module, ideal for
remote monitoring. The device is easy to install and operate. Through Ethernet control, the device
is able to compress and transmit images to multiple users. With network attached storage (NAS),
the device is able to store and retrieve data easily.
The device is well suited for HD monitoring in various places, such as rivers, forests, roads, railways,
airports, ports, oil fields, posts, squares, parks, scenic areas, streets, stations, stadiums, residential
blocks, libraries, shopping malls, hotels, government buildings, museums, and banks.
1.2 Key Function
The key functions of the device are as follows. Actual functions may vary for different models. You
can enable the functions as you need.
Event Function
The device detects basic events and multiple smart events.
PTZ Function
The device supports PTZ functions, such as presets, scans, patrol, and power-off memory.
1.3 System Requirement
Your computer should meet the requirements for proper visiting and operating the product.
Recommended Specifications
Operating System
Microsoft Windows XP/ Windows 7/ Windows 8/ Windows 10
Mac OS 10.13 or later
CPU
Intel® Pentium® IV 3.0 GHz or higher
RAM
1 G or higher
Display
1024 × 768 resolution or higher
Web Browser
Internet Explorer 10 and above version, Apple Safari 12 and above
version, Mozilla Firefox 52 and above version, Google Chrome 57 and
above version.

Network Speed Dome User Manual
2
Chapter 2 Device Activation and Accessing
To protect the security and privacy of the user account and data, you should set a login password
to activate the device when access the device via network.
Note
Refer to the user manual of the software client for the detailed information about the client
software activation.
2.1 Activate Device
The device need to be activated by setting a strong password before use. This part introduces
activation using different client tools.
2.1.1 Activate Device via Web Browser
Use web browser to activate the device. For the device with the DHCP enabled by default, use
SADP software or PC client to activate the device.
Before You Start
Make sure your device and your PC connect to the same LAN.
Steps
1. Change the IP address of your PC to the same subnet as the device.
The default IP address of the device is 192.168.1.64.
2. Open a web browser and input the default IP address.
3. Create and confirm the admin password.
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
4. Click OK to complete activation and enter Live View page.
5. Modify IP address of the camera.
1) Enter IP address modification page. Configuration → Network → TCP/IP
2) Change IP address.
3) Save the settings.

Network Speed Dome User Manual
3
2.1.2 Activate via SADP
SADP is a tool to detect, activate and modify the IP address of the device over the LAN.
Before You Start
●Get the SADP software from the supplied disk or the official website
http://www.hikvision.com/, and install the SADP according to the prompts.
●The device and the PC that runs the SADP tool should belong to the same subnet.
The following steps show how to activate one device and modify its IP address. For batch
activation and IP address modification, refer to User Manual of SADP for details.
Steps
1. Run the SADP software and search the online devices.
2. Find and select your device in online device list.
3. Input new password (admin password) and confirm the password.
Caution
STRONG PASSWORD RECOMMENDED-We highly recommend you create a strong password of
your own choosing (using a minimum of 8 characters, including upper case letters, lower case
letters, numbers, and special characters) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
4. Click Activate to start activation.
Status of the device becomes Active after successful activation.
5. Modify IP address of the device.
1) Select the device.
2) Change the device IP address to the same subnet as your computer by either modifying the IP
address manually or checking Enable DHCP.
3) Input the admin password and click Modify to activate your IP address modification.

Network Speed Dome User Manual
4
2.2 Access Device via Web Browser
Before You Start
Check the system requirement to confirm that the operating computer and web browser meets
the requirements. See System Requirement.
Steps
1. Open the web browser.
2. Input IP address of the device to enter the login interface.
3. Input user name and password.
Note
Illegal login lock is activated by default. If admin user performs seven failed password attempts
(five attempts for user/operator), the IP address is blocked for 30 minutes.
If illegal login lock is not needed, go to Configuration → System → Security → Security
Serviceto turn it off.
4. Click Login.
5. Download and install appropriate plug-in for your web browser.
For IE based web browser, webcomponents and QuickTime(TM) are optional. For non-IE based
web browser, webcomponents, QuickTime(TM), VLC and MJEPG are optional.
2.2.1 Plug-in Installation
Certain operation systems and web browser may restrict the display and operation of the device
function. You should install plug-in or complete certain settings to ensure normal display and
operation. For detailed restricted function, refer to the actual device.
Operating System
Web Browser
Operation
Windows
Internet Explorer 10+
Follow pop-up prompts to
complete plug-in installation.
Windows 7 and above version
Google Chrome 57+
Mozilla Firefox 52+
Click to
download and install plug-in.
Mac OS
Google Chrome 57+
Mozilla Firefox 52+
Mac Safari 12+
Plug-in installation is not
required.
Go to Configuration →
Network → Advanced
Settings → Network Service
to enable WebSocket or
Websockets for normal view.

Network Speed Dome User Manual
5
Operating System
Web Browser
Operation
Display and operation of
certain functions are
restricted. For example,
Playback and Picture are not
available. For detailed
restricted function, refer to
the actual device.
Note
The device only supports Windows and Mac OS system and do not support Linux system.
2.2.2 Admin Password Recovery
If you forget the admin password, you can reset the password by clicking Forget Password on the
login page after completing the account security settings.
You can reset the password by setting the security question or email.
Note
When you need to reset the password, make sure that the device and the PC are on the same
network segment.
Security Question
You can set the account security during the activation. Or you can go to Configuration → System
→ User Management, click Account Security Settings, select the security question and input your
answer.
You can click Forget Password and answer the security question to reset the admin password
when access the device via browser.
Email
You can set the account security during the activation. Or you can go to Configuration → System
→ User Management, click Account Security Settings, input your email address to receive the
verification code during the recovering operation process.
2.2.3 Illegal Login Lock
It helps to improve the security when accessing the device via Internet.
Go to Configuration → System → Security → Security Service, and enable Enable Illegal Login
Lock. Illegal Login Attempts and Locking Duration are configurable.
Illegal Login Attempts

Network Speed Dome User Manual
6
When your login attempts with the wrong password reach the set times, the device is locked.
Locking Duration
The device releases the lock after the setting duration.

Network Speed Dome User Manual
7
Chapter 3 PTZ
PTZ is an abbreviation for pan, tilt, and zoom. It means the movement options of the camera.
3.1 PTZ Control
In live view interface, you can use the PTZ control buttons to control the device panning, tilting,
and zooming.
PTZ Control Panel
Click and hold the directional button to pan/tilt
the device.
Note
●You can set Keyboard Control Speed in
Configuration → PTZ → Basic Settings. The
speed of pan/tilt movement in live view is
based on this speed level.
●You can set Max. Tilt-angle in Configuration
→ PTZ → Basic Settings to limit tilt
movement range.
Click the button, then the device keeps
panning.
Note
You can set Auto Scan Speed in Configuration
→ PTZ → Basic Settings. The higher the value
you set, the faster the device pans.
Drag the slider to adjust the speed of pan/tilt
movement.
Note
You can set Manual Control Speed in Configuration → PTZ → Basic Settings.
Compatible
The control speed is same as Keyboard Control

Network Speed Dome User Manual
8
Speed.
Pedestrian
Choose Pedestrian when you monitor the
pedestrians.
Non-motor Vehicle
Choose Non-motor Vehicle when you monitor
the non-motor vehicles.
Motor Vehicle
Choose Motor Vehicle when you monitor the
motor vehicles.
Auto
You are recommended to set it as Auto when
the application scene of the speed dome is
complicated.
To avoid blurred image resulted from fast zoom, you can check Enable Proportional Pan
in Configuration →PTZ →Basic Settings. If you enable this function, the pan/tilt speed
change according to the amount of zoom. When there is a large amount of zoom, the
pan/tilt speed will be slower for keeping the image from moving too fast on the live
view image.
Zoom in/out
Click the button, and the lens zooms in.
Click the button, and the lens zooms out.
Note
●You can set Zooming Speed in Configuration → PTZ → Basic Settings. The higher the value is,
the faster the zooming speed is.
You can set Zoom Limit in Configuration → Image → Display Settings → Other to limit the
maximum value of the total zoom (digital zoom and optical zoom).
Focus
Click the button, then the lens focuses near
and the object nearby gets clear.
Click the button, then the lens focuses far and
the object far away gets clear.

Network Speed Dome User Manual
9
Iris
When the image is too dark, click the button to
enlarge the iris.
When the image is too bright, click the button
to stop down the iris.
3.2 Set Preset
A preset is a predefined image position. For the defined preset, you can call the preset No. to view
the position.
Steps
1. Click to show the setting panel, and click .
2. Use the PTZ control buttons to move the lens to the desired position.
3. Select a preset number from the preset list, and click to finish the setting.
Note
Some presets are predefined with special command. You can only call them but not configure
them.
4. Repeat the steps above to set multiple presets.
Click the button to call the preset.
Click the button to delete the preset.
Note
You can delete all presets in Configuration → PTZ → Clear Config. Click Clear All Presets, and
click Save.
What to do next
Go to Configuration → PTZ → Basic Settings to set preset freezing and preset speed.
After enabling preset freezing, the live image switches directly from one preset to another,
without showing the areas between these two scenes. It also guarantees the masked area will not
be seen when the device is moving.

Network Speed Dome User Manual
10
3.2.1 Special Presets
You can call the following presets with special demands to enable corresponding functions.
Preset No.
Function
Preset No.
Function
33
Auto flip
92
Set manual limits
34
Back to origin
93
Save manual limits
35
Call patrol 1
94
Remote reboot
36
Call patrol 2
95
Call OSD menu
37
Call patrol 3
96
Stop a scan
38
Call patrol 4
97
Start random scan
39
Day mode
98
Start frame scan
40
Night mode
99
Start auto scan
41
Call pattern 1
100
Start tilt scan
42
Call pattern 2
101
Start panorama scan
43
Call pattern 3
102
Call patrol 5
44
Call pattern 4
103
Call patrol 6
45
One-touch patrol
104
Call patrol 7
46
Day/Night Mode
105
Call patrol 8
3.3 Set Patrol Scan
Patrol scan is a function to automatically move among multiple presets.
Before You Start
Note
This function is only supported by certain models.
Make sure that you have defined more than one presets. See Set Preset for detailed configuration.
Steps
1. Click to show the setting panel, and click to enter patrol setting interface.
2. Select a patrol number from the list and click .
3. Click to add presets.
Preset
Select predefined preset.

Network Speed Dome User Manual
11
Speed
Set the speed of moving from one preset to another.
Time
It is the duration staying on one patrol point.
Delete the presets in patrol.
Adjust the preset order.
Note
A patrol can be configured with 32 presets at most, and 2 presets at least.
4. Click OK to finish a patrol setting.
5. Repeat the steps above to configure multiple patrols.
6. Operate patrols.
Call the patrol.
Stop patroling.
Delete the patrol.
Set the patrol.
Note
You can delete all patrols in Configuration → PTZ → Clear Config. Click Clear All Patrols, and
click Save.
3.3.1 Set One-Touch Patrol
The device automatically adds presets to one patrol path and starts patrol scan.
Steps
1. Set two or more presets among preset No.1 to preset No.32. For setting presets, refer to Set
Preset.
The device will automatically add presets to patrol path No.8.
2. Choose one of the following methods to enable the function.
–Click .
–Call patrol path No.8.
Select and call preset No.45.