HIK VISION ECI-B62Z2 User manual

Network Bullet Camera
ECI-B62Z2
Quick Start Guide

QSG ECI-B62Z2 030618NA 2
Manual Illustrations and Features
Gra hics (screen shots, roduct ictures, etc.) in this document are for illustrative ur oses
only. Your actual roduct may differ in a earance. Your roduct might not su ort all
features discussed in this document.
Hikvision USA Inc., 18639 Railroad St., City of Industry, CA 91748, USA • Hikvision Canada,
4848 rue Levy, Saint Laurent, Quebec, Canada, H4R 2P1
Tele hone: [phone] • Toll Free in USA: [phone] • E-Mail:
[email protected] • www.hikvision.com
COPYRIGHT ©2017-2018 Hangzhou Hikvision Digital Technology Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, ictures, gra hs are the
ro erties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter
referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”)
cannot be re roduced, changed, translated, or distributed, artially or wholly, by any
means, without the rior written ermission of Hikvision. Unless otherwise sti ulated,
Hikvision does not make any warranties, guarantees or re resentations, ex ress or im lied,
regarding to the Manual.
About t is Manual
This Manual is a licable to the B62Z2 Network Bullet Camera.
The Manual includes instructions for using and managing the roduct. Pictures, charts,
images and all other information hereinafter are for descri tion and ex lanation only. The
information contained in the Manual is subject to change, without notice, due to firmware
u dates or other reasons. Please find the latest version in the com any website
(htt ://overseas.hikvision.com/en/).
Please use this user manual under the guidance of rofessionals.
Trademarks Acknowledgement
and other Hikvision trademarks and logos are the ro erties of Hikvision in
various jurisdictions. Other trademarks and logos mentioned below are the ro erties of
their res ective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED,
WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS,” WITH ALL FAULTS
AND ERRORS, AND HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL
HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG
OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF
DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE
WHOLLY AT YOUR OWN RISKS. HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR
JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE

QSG ECI-B62Z2 030618NA 3
CONFORMS THE APPLICABLE LAW. HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT
THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE
LATER PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes or modification not ex ressly a roved by the arty
res onsible for com liance could void the user’s authority to o erate the equi ment.
FCC Compliance: This equi ment has been tested and found to com ly with the limits for a
Class B digital device, ursuant to art 15 of the FCC Rules. These limits are designed to
rovide reasonable rotection against harmful interference in a residential installation. This
equi ment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
articular installation. If this equi ment does cause harmful interference to radio or
television rece tion, which can be determined by turning the equi ment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
˗Reorient or relocate the receiving antenna.
˗Increase the se aration between the equi ment and receiver.
˗Connect the equi ment into an outlet on a circuit different from that to which the
receiver is connected.
˗Consult the dealer or an ex erienced radio/TV technician for hel .
FCC Conditions
This device com lies with art 15 of the FCC Rules. O eration is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must acce t any interference received, including interference that may cause
undesired o eration.
EU Conformity Statement
This roduct and, if a licable, the su lied accessories too are marked with
“CE” and com ly therefore with the a licable harmonized Euro ean
standards listed under the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
dis osed of as unsorted munici al waste in the Euro ean Union. For ro er
recycling, return this roduct to your local su lier u on the urchase of
equivalent new equi ment, or dis ose of it at designated collection oints. For
more information see: www.recyclethis.info
2006/66/EC (battery directive): This roduct contains a battery that cannot be
dis osed of as unsorted munici al waste in the Euro ean Union. See the
roduct documentation for s ecific battery information. The battery is marked
with this symbol, which may include lettering to indicate cadmium (Cd), lead
(Pb), or mercury (Hg). For ro er recycling, return the battery to your su lier
or to a designated collection oint. For more information see: www.recyclethis.info
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

QSG ECI-B62Z2 030618NA 4
Safety Instruction
These instructions are intended to ensure that user can use the roduct correctly to avoid
danger or ro erty loss.
The recaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equi ment damage may occur if any of the cautions are neglected.
Warnings
● Pro er configuration of all asswords and other security settings is the res onsibility of
the installer and/or end-user.
● In the use of the roduct, you must be in strict com liance with the electrical safety
regulations of the nation and region. Please refer to technical s ecifications for detailed
information.
● In ut voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited
Power Source with 24 VAC or 12 VDC according to the IEC60950-1 standard. Please refer
to technical s ecifications for detailed information.
● Do not connect several devices to one ower ada ter as ada ter overload may cause
over-heating or a fire hazard.
● Make sure that the lug is firmly connected to the ower socket. When the roduct is
mounted on a wall or ceiling, the device shall be firmly fixed.
● If smoke, odor, or noise rise from the device, turn off the ower at once and un lug the
ower cable, and then lease contact the service center.
Cautions
● Make sure the ower su ly voltage is correct before using the camera.
● Do not dro the camera or subject it to hysical shock.
● Do not touch sensor modules with fingers. If cleaning is necessary, use clean cloth with
a bit of ethanol and wi e it gently. If the camera will not be used for an extended eriod,
lease re lace the lens ca to rotect the sensor from dirt.
● Do not aim the camera at the sun or extra bright laces. Blooming or smearing may
occur otherwise (which is not a malfunction), and affect the endurance of sensor at the
same time.
● The sensor may be burned out by a laser beam, so when any laser equi ment is in using,
make sure that the surface of sensor will not be ex osed to the laser beam.
Warnings Follow these safeguards
to revent serious injury or death.
Cautions Follow these recautions to revent
otential injury or material damage.

QSG ECI-B62Z2 030618NA 5
● Do not lace the camera in extremely hot, cold (the o erating tem erature shall be -30°
to +60° C, or -40° to 60° C if the camera model has an “H” in its suffix), dusty or dam
locations, and do not ex ose it to high electromagnetic radiation.
● To avoid heat accumulation, good ventilation is required for o erating environment.
● Kee the camera away from liquid while in use.
● While in delivery, the camera shall be acked in its original acking, or acking of the
same texture.
● Regular art re lacement: a few arts (e.g. electrolytic ca acitor) of the equi ment
shall be re laced regularly according to their average enduring time. The average time
varies because of differences between o erating environment and using history, so
regular checking is recommended for all the users. Please contact your dealer for more
details.
● Im ro er use or re lacement of the battery may result in hazard of ex losion. Re lace
with the same or equivalent ty e only. Dis ose of used batteries according to the
instructions rovided by the battery manufacturer.
● If the roduct does not work ro erly, contact your dealer or the nearest service center.
Never attem t to disassemble the camera yourself. (We shall not assume any
res onsibility for roblems caused by unauthorized re air or maintenance.)

QSG ECI-B62Z2 030618NA 6
Table of Contents
1 Appearance Description ................................................................................................................................................. 0
1.1 Ty e I Camera.................................................................................................................................................. 0
1.2 Ty e II Camera ................................................................................................................................................. 1
2 Installation ...................................................................................................................................................................... 2
2.1 Memory Card Installation ................................................................................................................................ 2
2.2 Ceiling/Wall Mounting .................................................................................................................................... 3
2.3 Zoom and Focus Adjustment ........................................................................................................................... 4
2.3.1 Ty e I .................................................................................................................................................... 4
Ty e II ................................................................................................................................................... 5 2.3.2
2.4 Installation of Network Cable Water-Resistant Jacket (O tional) ..................................................................... 5
3 Camera LAN Configuration ............................................................................................................................................. 7
Wiring ............................................................................................................................................................. 7 3.1
Activate t e Camera ....................................................................................................................................... 7 3.2
3.2.1 Activation via Web Browser ................................................................................................................ 7
3.2.2 Activation via SADP Software .............................................................................................................. 8
Modify t e IP Address .................................................................................................................................... 9 3.3
4 Access via Web Browser ............................................................................................................................................... 10
5 Hik-Connect .................................................................................................................................................................. 11
Enable Hik-Connect for Use with Cameras .................................................................................................... 11 5.1
Enable Hik-Connect Service via SADP Software ............................................................................................. 11 5.2
Enable Hik-Connect via a Web Browser .............................................................................................. 12 5.2.1
Add Camera to Hik-Connect .......................................................................................................................... 13 5.3
Initialize the Memory Card ............................................................................................................................ 14 5.4

QSG ECI-B62Z2 030618NA 0
1 Appearance Description
1.1 Type I Camera
The overview of the ty e I camera is shown below.
1
D
C 12VIN
10
5 6
7
3
4
2
89
11
Overview of Ty e I Camera Figure 1-1
Descri tion Table 1-1
No. Description
1 Front Cover
2 Sun Shield
3 Lens
4 IR LED
5 Memory Card Slot
6 Reset Button
7 Camera Body
8 Bracket
9 Network Interface
10 Power Interface
11 CVBS Interface
Note:
Press RESET for 10 s when the camera is owering on or rebooting to restore the default
settings, including the user name, assword, IP address, ort no., etc.

QSG ECI-B62Z2 030618NA 1
1.2 Type II Camera
The overview of the ty e II camera is shown below.
1
DC
1 2V
IN
5 6
7
3
4
2
89
10
Overview of Ty e II Camera Figure 1-2
Descri tion Table 1-2
No. Description
1 Front Cover
2 Sun Shield
3 Lens
4 IR LED
5 Memory Card Slot
6 Reset Button
7 Camera Body
8 Bracket
9 Network Interface
10 Power Interface
Note:
Press RESET for about 10s when the camera is owering u or rebooting, in order to restore
the default settings, which include the user name, assword, IP address, ort number, etc.

QSG ECI-B62Z2 030618NA 2
2 Installation
Make sure of the following before you start:
● The device included in the ackage is in good condition and all required arts are
included.
● The standard ower su ly is 12 VDC or PoE (802.3af), and must be consistent with
camera requirements.
● Equi ment is owered-off during installation.
● The installation environment is correct.
● The wall or ceiling is strong enough to withstand four times the weight of the camera
and mount.
For IR cameras, take the following recautions in order to revent IR reflection:
Make sure that there is no reflective surface that is too close to the camera lens. The IR
light from the camera may reflect back into the lens, which may cause reflection.
2.1 Memory Card Installation
NOTE: A microSD memory card is not included with the camera. You will need to
urchase one se arately.
This series of cameras su orts memory card installation. Different camera ty es share
similar installation ste s, and we used the ty e II camera as an exam le here.
Steps:
1. Loosen the lock screw to remove the sun shield.
DC1 2VIN
Lock Screw
Remove the Sun Shield Figure 2-1
2. Rotate the front cover counterclockwise in order to remove it.
DC1 2VIN
Remove the Front Cover Figure 2-2
3. Insert the memory card into the memory card slot.
DC
12V IN
Figure 2-3 Insert the Memory Card

QSG ECI-B62Z2 030618NA 3
4. Rotate the front cover clockwise back onto the camera and re lace the sun shield.
5. Tighten the lock screw clockwise to fix the sun shield.
DC12VIN
Fix the Front Cover Figure 2-4
2.2 Ceiling/Wall Mounting
Before You Start:
These ty es of cameras are equi ed with a bracket. They can be mounted directly to a wall
or ceiling.
Steps:
1. Stick the su lied drill tem late to the wall or ceiling where you intend to install the
camera.
2. Drill screw holes in the wall or ceiling according to the drill tem late.
Ceiling Mounting
11
11
2
2 2
2
1:Sc rew Hole for
Bracket
2:Sc rew Hole for
Mounting B ase
Ø 100 mm
Ø 36 mm
8-Ø 5 mm
Drilling Holes in the Wall/Ceiling Figure 2-5
3. To route the cables through the wall (or ceiling), drill a cable hole according to the drill
tem late. Ski this ste if you want to route the cables on the surface of the wall (or the
ceiling).
4. Route the camera cables.
5. Secure the camera to the wall (or ceiling) with the su lied screws.
Drill Tem late Drill Tem late
Secure the Camera Figure 2-6
Note:
● The su lied screw ackage contains self-ta ing screws and ex ansion bolts.
● For a cement wall (or ceiling), use ex ansion bolts to secure the camera. For a
wooden wall (or ceiling), use self-ta ing screws.
6. Connect the corres onding cables, such as the ower cord or network cable.