HIK VISION Network Dome Camera User manual

Network Dome Camera
Installation Manual
V3.0.0
Hangzhou Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com
2010-04

Thank you for purchasing our product. If there are any questions, or requests,
please do not hesitate to contact the dealer.
This manual applies to DS-2CD763PF(NF)-E(I), DS-2CD753F-E(I),
DS-2CD793PF(NF)-E(I), DS-2CD793PFWD(NFWD)-E(I) and DS-2CD733F-E(I)
Network Camera.
This manual may contain several technical incorrect places or printing errors,
and the content is subject to change without notice. The updates will be added
to the new version of this manual. We will readily improve or update the
products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or
reliability of the security or signaling aspects of this product. UL has only
tested for fire, shock or casualty hazards as outlined in UL’s Standard(s) for
Safety, UL60950-1. UL Certification does not cover the performance or
reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.”

Installation Manual of Network Dome Camera
1
Safety Instruction
These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into ‘Warnings’ and ‘Cautions’:
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to
prevent serious injury or death.
Cautions Follow these precautions to
prevent potential injury or material
damage.
Warnings:
1. In the use of the product, you must strictly comply with the electrical safety regulations
of the nation and region.
2. Source with DC 12V or AC24V according to the IEC60950-1 standard. Please refer to
technical specifications for more details.
3. Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.If use the POE as the power supply, please make
sure that the POE Switch have the sufficient power.
4. Please make sure that the plug is firmly inserted into the power socket.
5. When the product is installed on a wall or ceiling, the device should be firmly fixed.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
2
6. If smoke, odor, or noise rise from the device, turn off the power at once and unplug the
power cable, then contact the service center.
7. If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the camera yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
3
Notice:
1. Make sure the power supply voltage is correct before using the camera.
2. Do not drop the camera or subject it to physical shock.
3. Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with
a bit of ethanol and wipe it gently. If the camera will not be used for an extended period
of time, put on the lens cap to protect the sensor from dirt.
4. Do not aim the camera at the sun or extra bright places. A blooming or smear may occur
otherwise (which is not a malfunction however), and affecting the endurance of sensor at
the same time.
5. The sensor may be burned out by a laser beam, so when any laser equipment is being
used, make sure that the surface of the sensor will not be exposed to the laser beam.
6. Do not place the camera in extremely hot or cold temperatures (the operating
temperature should be between -10°C ~+60°C, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
7. To avoid heat accumulation, good ventilation is required for a proper operating
environment.
8. While shipping, the camera should be packed in its original packing, or packing of the
same texture.
9. Regular part replacement: a few parts (e.g. electrolytic capacitor) of the equipment
should be replaced regularly according to their average life time. The average time varies
because of differences between operating environment and usage history, so regular
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
4
checking is recommended for all users. Please contact with your dealer for more details.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
5
Index
Chapter 1 Introduction..............................................................................................................1
1.1 Network camera Functions and Features .............................................................1
1.2 Applications .....................................................................................................................2
Chapter 2 Installation.................................................................................................................3
2.1 Camera Description and Connection.....................................................................3
2.2 Hardware Installation ...................................................................................................5
Appendix Product Specification .........................................................................................8
DS-2CD763PF(NF)-E(I) ........................................................................................................8
Specification ....................................................................................................................8
Dimensions.......................................................................................................................9
DS-2CD753F-E(I) ................................................................................................................ 10
Specification ................................................................................................................. 10
Dimensions.................................................................................................................... 11
DS-2CD793PF(NF)-E(I) ..................................................................................................... 12
Specification ................................................................................................................. 12
Dimensions.................................................................................................................... 13
DS-2CD793PFWD(NFWD)-E(I)....................................................................................... 14
Specification ................................................................................................................. 14
Dimensions.................................................................................................................... 15
DS-2CD733F-E(I) ................................................................................................................ 16
Specification ................................................................................................................. 16
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
6
Dimensions.................................................................................................................... 17

Installation Manual of Network Dome Camera
1
Chapter 1 Introduction
Network camera is a kind of embedded digital surveillance product that combines the
features of both traditional analog camera and net DVS (Digital Video Server). Due to the
embedded Linux operation system and the latest Davinci hardware platform of TI, the system
operates with high scheduling efficiency. Furthermore, the firmware is burned in the flash,
which makes the product small, reliable and highly stable.
1.1 Network camera Functions and Features
Functions:
Network Function: Support the TCP/IP protocols and IE browsing.
Heartbeat Function: The server can acquire real time operating performance of the
network camera through the heartbeat function.
Alarm Function: The product includes 2 channel of alarm signal input and 2 channel of
alarm on/off output, and supports motion detection, video loss, Network Broken, IP
address conflict, Storage exception.
Voice Talking: Support bidirectional voice talking.
User Management: Support multilevel right management. The administrator can create
up to 15 separate users with different right levels, which highly improves the system
security.
Compression Functions:
Support 1 channel video signal and standard H.264 encoding compression, which
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
2
supports both variable bit rate and variable frame rate; besides, you can self-define both
the video quality and its compressed bit rate.
Remote Control:
The product offers a 10M/100M self-adaptive Ethernet interface.
Support TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP protocols.
Set the parameters, browse real time videos or check the camera performance through
software or IE, and store the compressed bit rate through network.
Support remote upgrades and maintenance.
1.2 Applications
This camera is ideal for remote control network applications. E.g.:
1. Network surveillance for bank counters, supermarkets and factories.
2. Remote surveillance for nursing homes, kindergartens and schools.
3. AI janitors.
4. AI building/district management systems.
5. Self-service systems of power plants.
6. Pipelining and warehouse monitoring.
7. Surveillance for airdrome, railway station, bus stop etc.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
3
Chapter 2 Installation
NOTE:
1. Please check if all the items on the package list have been included with your
camera.
2. Read the following contents carefully before the installation.
3. Make sure that all the related equipment is power-off during the installation.
4. Check the power supply to prevent any damage caused by mismatching problems.
5. If the product does not operate properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. Users are
responsible for any problem caused by modification or repairing without
authorization.
2.1 Camera Description and Connection
Camera description:
Camera Connection:
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
4
Serial NO. Description
1 LAN(PoE): 10M/100M self-adaptive Ethernet interface
2 INITIAL SET: Reset all parameters to factory default settings.
3 AUDIO OUT: Audio output interface
4 MIC IN: Audio input interface
5 D+, D-: RS-485 interface
6 1A 1B, 2A 2B: Alarm output interface
7 IN1 GND, IN2 GND: Alarm input interface
8 Power supply
9 SD card slot
10 Video output interface
11 Power LED indicator, which turns red when power is applied to the unit
NOTE:
When the camera is power up, press the “INITIAL SET” button for about 10 seconds,
then all parameters, including user name, password, IP address, port number, etc., will
be reset to the factory default settings.
The alarm input is a NO/NC relay. If the input is not a NO/NC relay, follow the
connection diagram below:
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
5
To connect to an AC/DC load, use the following diagram:
The alarm output is an on/off output that requires external power supply on connection. The
external power supply shall be 12V DC/30mA, or use AC with external relays. Equipment
damage or electric shock may cause if without relays.
2.2 Hardware Installation
The ceiling mount is a suitable installation method for this camera. Please stick to the
following steps:
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
6
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©
1. Use the screws to fix the bottom plate on the ceiling, and rotate dome camera in
anti-clockwise direction to attach it to the bottom plate, and finally use the lock screw to
secure the dome camera into position.
2. Loosen the set screws with a hexagonal screw driver (attached with the camera), and take
down the dome cover.
NOTE:
If required, user can apply the pliers
to remove the clip (refer to the part
kdi
dttdli
)
th id f

Installation Manual of Network Dome Camera
7
3. While viewing the video on the monitor, adjust the camera’s view angle for your need.
4. Install the dome cover and tighten the screws.
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
8
Appendix Product Specification
DS-2CD763PF(NF)-E(I)
Specification
DS-2CD763PF-E(I) / DS-2CD763NF-E(I)
Model
Parameter 1.3 Megapixel 1/3 ”CCD Day&Night Vandal-proof Network Dome
Camera
Camera
Image Sensor 1/3 ” SONY Progressive Scan CCD
Signal System PAL / NTSC
Min. Illumination
0.1Lux @(F1.2, AGC ON)
-I :
0.1Lux @(F1.2, AGC ON), 0 Lux with IR
Electronic
Shutter 1/25(1/30)s ~1/100,000s
Lens 2.7-9mm @ F1.2
Angle of view: 101°~30.4°
Lens Mount φ14
Auto Iris DC Drive
Adjustment
Range Pan0~360°, Tilt0~75°, Rotation0~360°
Day& Night Electronic (-I: IR cut filter with auto switch)
Compression Standard
Video
Compression H.264/Mjpeg
Bit rate 32 Kbps~16Mbps
Audio
Compression G.711(G.722.1 optional)
Image
Max. Image
Resolution 1280 x 960
Frame Rate 50HZ: 12.5fps (1280 x 960), 25fps (1280 x 720)
60HZ: 15fps (1280×960), 30fps (1280 x 720)
Image Settings Saturation, Brightness, Contrast adjustable through client software or
web browser
Network
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
9
Storage Support SD/SDHC, NAS (ISCSI optional)
Intelligent Alarm Motion Detection, Video Loss, Network Broken, IP address conflict,
Storage exception
Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP
(SNMP, HTTPS, FTP, SIP, SRTP, 802.1x, IPV6 optional )
Basic Initial Set Button, Anti-flicker, Dual Stream, Heartbeat, Password
Protection, Watermark
Interface
Audio Input 1 channel microphone input, 3.5mm mini-jack
Audio Output 1 channel 3.5mm audio interface (Line level, 600Ω)
Communication
Interface
1 RJ45 10M / 100M self-adaptive Ethernet interface, 1 RS-485
interface
Alarm Input 2 channel
Alarm Output 2 channel
Video Output 1Vp-p Composite Output (75Ω/RCA)
General
Operating
Condition -10 ~60 (14°F~140°F), Humidi℃℃ ty 90% or less(non-condensing)
Power Supply DC12V±10% / PoE (AC24V optional)
Power
Consumption
7.5W MAX
-I: 9W MAX(9.5W MAX with ICR working)
Impact
Protection IEC60068-2-75Eh,50J;EN50102, up to IK10
IR Range -I: Within 10-20 meters (32.8-65.6ft)
Dimensions(mm) φ140 × 114 (φ5.5" × 4.9")
Weight 1400g (3.08lbs)
*”I” series supports 10-20 meters (32.8-65.6ft) IR Range
Dimensions
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
10
DS-2CD753F-E(I)
Specification
DS-2CD753F-E(I)
Model
Parameter 2 Megapixel 1/3 ” CMOS Day&Night Vandal-proof Network Dome
Camera
Camera
Image Sensor 1/3 ” Progressive Scan CMOS
Min. Illumination
0.5Lux @(F1.2, AGC ON), 0.1Lux @(F1.2, AGC ON, Sense-up×5)
-I:
0.5Lux @(F1.2, AGC ON), 0.1Lux @(F1.2, AGC ON, Sense×5) , 0 Lux
with IR
Electronic
Shutter 1/25s ~1/100,000s
Lens 2.7-9mm @ F1.2
Angle of view: 101°~30.4°
Lens Mount φ14
Auto Iris DC Drive
Adjustment
Range Pan0~360°, Tilt0~75°, Rotation0~360°
Day&Night Electronic (-I: IR cut filter with auto switch)
Compression Standard
Video
Compression H.264/MJpeg
Bit rate 32 Kbps~16Mbps
Audio
Compression G.711(G.722.1 optional)
Image
Max. Image
Resolution 1600 x 1200
Frame Rate
50HZ: 12.5fps (1600×1200), 12.5fps (1600×912), 25fps (1280×960),
25fps (1280×720)
60HZ: 15fps (1600×1200), 15fps (1600×912), 25fps (1280×960), 30fps
(1280×720)
Video Parameter Saturation, Brightness, Contrast adjustable through client software or
web browser
Network
Storage Support SD/SDHC, NAS (ISCSI optional)
Intelligent Alarm Motion Detection, Video Loss, Network Broken, IP address conflict,
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
11
Storage exception
Protocols TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP
(SNMP, HTTPS, FTP, SIP, SRTP, 802.1x, IPV6 optional )
Basic e-PTZ , Initial Set Button, Anti-flicker, Dual Stream, Heartbeat,
Password Protection, Watermark
Interface
Audio Input 1 channel microphone input, 3.5mm mini-jack
Audio Output 1 channel 3.5mm audio interface (Line level, 600Ω)
Communication
Interface
1 RJ45 10M / 100M self-adaptive Ethernet interface, 1 RS-485
interface
Alarm Input 2 channel
Alarm Output 2channel
Video Output 1Vp-p Composite Output (75Ω/RCA)
General
Operating
Condition -10 ~60 (14°F~140°F), Humidity 90% or less(non℃℃ -condensing)
Power Supply DC12V±10% / PoE (AC24V optional)
Power
Consumption
4.5W MAX
-I: 6W MAX(6.5W MAX with ICR working)
Impact
Protection IEC60068-2-75Eh,50J;EN50102, up to IK10
IR Range -I: Within 10-20 meters (32.8-65.6ft)
Dimensions(mm) φ140 × 114 (φ5.5" × 4.9")
Weight 1400g (3.08lbs)
* ”I” series supports 10-20 meters (32.8-65.6ft) IR Range
Dimensions
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©

Installation Manual of Network Dome Camera
12
DS-2CD793PF(NF)-E(I)
Specification
DS-2CD793PF-E(I) / DS-2CD793NF-E(I)
Model
Parameter 4CIF 1/3 ” CCD Low Illumination Day&Night Vandal-proof Network
Dome Camera
Camera
Image Sensor 1/3 ” SONY CCD
Signal System PAL / NTSC
Min. Illumination
0.02Lux @ (F1.2, AGC ON)
0.027Lux @(F1.4, AGC ON)
-I:
0.02Lux @ (F1.2, AGC ON),0 Lux with IR
0.027Lux @(F1.4, AGC ON), 0 Lux with IR
Electronic
Shutter 1/25(1/30)s ~1/100,000s
Lens 2.8-11mm @ F1.4
Angle of view: 97°~24°
Lens Mount φ14
Auto Iris DC Drive
Adjustment
Range Pan0~360°, Tilt0~75°, Rotation0~360°
Day&Night Electronic (-I: IR cut filter with auto switch)
Compression Standard
Video
Compression H.264/MJpeg
Bit rate 32 Kbps~8Mbps
Audio
Compression G.711(G.722.1 optional)
Image
Max. Image
Resolution
PAL: 704 × 576
NTSC: 704 × 480
Frame Rate 50HZ:25 fps (704 × 576)
60HZ:30fps (704 × 480)
Image Settings Saturation, Brightness, Contrast adjustable through client software or
web browser
Network
Storage Support SD/SDHC, NAS (ISCSI optional)
Intelligent Alarm Motion Detection, Video Loss, Network Broken, IP address conflict,
Hangzhou Hikvision Digital Technology Co., Ltd. | Copyright ©