HIK VISION DS-2CD883F-E series User guide

Network Camera
Quick Operation Guide
V4.0.1
Hikvision Digital Technology Co., Ltd.
http://www.hikvision.com

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
1
Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate
to contact the dealer. This manual applies to
Type
Model
Box camera III
DS-2CD883F-E, DS-2CD855F-E, DS-2CD854F(WD)-E,
DS-2CD853F-E, DS-2CD864F(WD)-E,
DS-2CD863PF(NF)-E, DS-2CD893PFWD(NFWD)-E,
DS-2CD833F-E, DS-2CD893PF(NF)-E
Dome camera III
DS-2CD783F-E(I), DS-2CD754F-E(I), DS-2CD764FWD-E(I),
DS-2CD764F-E, DS-2CD754FWD-E(I), DS-2CD753F-E(I),
DS-2CD763PF(NF)-E(I), DS-2CD793PF-E(I),
DS-2CD793PFWD(NFWD)-E(I), DS-2CD733F-E(I),
DS-2CD733F-EZ, DS-2CD755F-E(I), DS-2CD793NF-E(I)
Dome camera IV
DS-2CD7233F-EIZH, DS-2CD7253F-E(I)ZH,
DS-CD7254F-EIZH, DS-2CD7293PFWD(NFWD)-EIZH,
DS-2CD7263NF(PF)-EZH, DS-2CD 7264FWD-EZH,
DS-2CD7293PF(NF)-EIZH, DS-2CD7255F-EIZHS
Bullet Camera
DS-2CD8253F-EI(Z), DS-2CD8233F-EI(Z),
DS-2CD8264FWD-EI(Z), DS-2CD8264F-E,
DS-2CD8254F-EI, DS-2CD8254FWD-E, DS-2CD8283F-EI,
DS-2CD8255F-EI
Cube Camera I
DS-2CD8133F-E, DS-2CD8153F-E
Cube Camera II
DS-2CD8464F-EI, DS-2CD8433F-EI
Mini Dome Camera
DS-2CD7164-E,DS-2CD7153-E, DS-2CD7133-E

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
2
This manual may contain several technical incorrect places or printing errors, and the content is
subject to change without notice. The updates will be added to the new version of this manual. We
will readily improve or update the products or procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or reliability of the security
or signaling aspects of this product. UL has only tested for fire, shock or casualty hazards as
outlined in UL’s Standard(s) for Safety, UL60950-1. UL Certification does not cover the
performance or reliability of the security or signaling aspects of this product. UL MAKES NO
REPRESENTATIONS, WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.”

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
3
Table of Contents
Chapter 1 Appearance Description.......................................................................... 1
1.1 Appearance Description of Box Camera ...........................................................1
1.1.1 Box Camera I .................................................................................................1
1.1.2 Box Camera II ................................................................................................2
1.1.3 Box Camera III ...............................................................................................5
1.2 Appearance Description of Dome Camera........................................................7
1.2.4 Dome Camera I..............................................................................................7
1.2.5 Dome Camera II.............................................................................................8
1.2.6 Dome Camera III..........................................................................................10
1.2.7 Dome Camera IV .........................................................................................12
1.3 Appearance Description of Bullet Camera ......................................................13
1.4 Appearance Description of Cube Camera .......................................................14
1.4.1 Cube Camera I .............................................................................................14
1.4.2 Cube Camera II ............................................................................................15
1.5 Appearance Description of Mini Dome Camera..............................................18
Chapter 2 Setting up the Network Camera over the LAN....................................... 20
Chapter 3 Accessing via Web Browsers ................................................................. 23

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
1
Chapter 1 Appearance Description
There are ten physical structures of network cameras, Box camera I, Box camera II, Box camera III,
Dome camera I, Dome camera II,Dome camera III, Dome camera IV, Bullet Camera, Cube Camera
and Mini Dome Camera.
1.1 Appearance Description of Box Camera
1.1.1 Box Camera I
Camera description:
Figure 1-1 Overview
Table 1-1 Description
No.
Description
1
CS Lens mount
2
Back focus ring
3
Auto-iris interface
4
10M/100M self-adaptive Ethernet interface
5
AUDIO IN: Audio input interface
AUDIO OUT: Audio output interface
6
SD: SD card slot
7
VIDEO OUT: Video output interface
8
Power supply interface
9
PWR: Power LED indicator
10
D+, D-: RS-485 interface
11
Ground
12
1A, 1B: Alarm output interface

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
2
13
IN, G: Alarm input interface
Note: The type of auto-iris interface is shown in Figure 1-2, and the definition of each pin is shown
below:
Figure 1-2 Auto-iris Interface
Table 1-2 Pins
Video-driven
DC-driven
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Camera wiring Diagram:
Figure 1-3 Wiring Diagram
1.1.2 Box Camera II
Camera description:

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
3
Figure 1-4 Overview
Figure 1-5 Overview
Table 1-3 Description
No.
Description
1
CS Lens mount
2
Auto-iris interface
3
Bracket mounting holes
4
F1+ F1-, F2+ F2- ,F3+ F3-: Alarm output interface
5
T1,T2,T3, T4,GND: Alarm input interface
6
D+, D-: RS-485 interface
7
10M/100M self-adaptive Ethernet interface
8
VIDEO OUT/HDMI: Video output interface
9
RESET: Reset button
10
TXD, RXD, GND: RS-232 interface
11
Power supply interface
12
POWER: Power LED indicator
13
SD: SD card slot
14
AUDIO IN: Audio input interface
15
AUDIO OUT: Audio output interface

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
4
16
Ground
Notes:
After the powering on of the camera, pressing and holding the RESET button for about 10
seconds can reset all the parameters to the default settings.
The type of auto-iris interface is shown in Figure 1-6, and the definition of each pin is shown
below:
Figure 1-6 Auto-iris Interface
Table 1-4 Pins
Video-driven
DC-driven
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Camera wiring Diagram:

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
5
Figure 1-7 Wiring Diagram
1.1.3 Box Camera III
Camera description:
Figure 1-8 Overview
Table 1-5 Description
No.
Description
1
Lens mount
2
Back focus ring
3
SD card slot
4
Auto-iris interface
5
10M/100M self-adaptive Ethernet interface
6
VIDEO OUT: Video output interface
7
AUDIO OUT: Audio output interface
8
POWER: Power LED indicator
9
Power supply interface
10
MIC IN: Audio input interface
11
D+, D-: RS-485 interface
12
IN, G: Alarm input interface
13
1A, 1B: Alarm output interface
14
Ground
15
RESET: Reset button
Notes:
After the powering on of the camera, pressing and holding the RESET button for about 10

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
6
seconds can reset all the parameters to the default settings.
The type of auto-iris interface is shown in Figure 1-9, and the definition of each pin is shown
below:
Figure 1-9 Auto-iris Interface
Table 1-6 Pins
Video-driven
DC-driven
1
Power
Damp-
2
NC
Damp+
3
Video
Drive+
4
GND
Drive-
Power, Video and GND pins are used when the auto-iris is driven by video; Damp+, Damp-, Drive+
and Drive- pins are used when the auto-iris is driven by DC.
Camera wiring Diagram:

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
7
Figure 1-10 Wiring Diagram
1.2 Appearance Description of Dome Camera
1.2.1 Dome Camera I
Camera description:
Figure 1-11 Overview
Table 1-7 Description
No.
Description
1
Video output interface
2
Power LED indicator
3
DIP switch
4
10M/100M self-adaptive Ethernet interface
5
D+, D-: RS-485 interface
6
Alarm IN: Alarm input interface
Alarm OUT: Alarm output interface
7
AIN: Audio input interface
AOUT: Audio output interface
8
Power supply interface
The function of positions 1-5 of DIP switch is shown below:
Position
Function
ON
OFF

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
8
1
SHARP: Sharpness
SOFT
2
AES: Auto Shutter
AI: Auto Iris
3
BLC: Back Light Compensation
OFF
4
FL: Anti-flicker
ON
5
NAGC: Normal AGC
SAGC: Special AGC
Camera wiring Diagram:
Figure 1-12 Wiring Diagram
1.2.2 Dome Camera II
Camera description:

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
9
Figure 1-13 Overview
Table 1-8 Description
No.
Description
1
10M/100M self-adaptive Ethernet interface
2
AUDIO IN: Audio input interface
3
AUDIO OUT: Audio output interface
4
D+, D-: RS-485 interface
5
IN, G: Alarm input interface
1A, 1B: Alarm output interface
6
Power supply interface
Camera wiring Diagram:
Figure 1-14 Wiring Diagram

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
10
1.2.3 Dome Camera III
Camera description:
Figure 1-15 Overview
Table 1-9 Description
No.
Description
1
10M/100M self-adaptive Ethernet interface
2
INITIAL SET: Reset button
3
AUDIO OUT: Audio output interface
4
MIC IN: Audio input interface
5
D+, D-: RS-485 interface
6
1A, 1B, 2A, 2B: Alarm output interface
7
IN1, GND, IN2, GND: Alarm input interface
8
Power supply interface
Note: After the powering on of the camera, pressing and holding the INITIAL SET button for about
10 seconds can reset all the parameters to the default settings.
Camera wiring Diagram:

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
11
Figure 1-16 Wiring Diagram

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
12
1.2.4 Dome Camera IV
Camera description:
Figure 1-17 Overview
Table 1-10 Description
No.
Description
1
Video output interface
2
LINK: Indicator is solid yellow when network is connected.
3
ACT: Indicator flashes blue when network connection is functioning properly.
4
PWR: Indicator is solid red when the device is powered on.
5
Micro SD slot
6
RESET: Reset button
7
10M/100M self-adaptive Ethernet interface
8
Power supply interface
9
Extended interface
Notes:
The extended interface can be connected to alarm input/output interface, audio input/output
7
8
9

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
13
interface, RS-485 interface, etc.
After the powering on of the camera, pressing and holding the RESET button for about 10
seconds can reset all the parameters to the default settings.
Camera wiring Diagram:
Figure 1-18 Wiring Diagram
1.3 Appearance Description of Bullet Camera
Camera description:
Figure 1-19 Overview
Figure 1-20 Overview
Table 1-11 Description
No.
Description

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
14
1
10M/100M self-adaptive Ethernet interface
2
Power supply interface
3
IN, G: Alarm input interface
1A, 1B: Alarm output interface
4
D+, D-: RS-485 interface
5
AUDIO IN, G: Audio input interface
AUDIO OUT, G: Audio output interface
Camera wiring Diagram:
Figure 1-21 Wiring Diagram
1.4 Appearance Description of Cube Camera
1.4.1 Cube Camera I
Camera description:
Figure 1-22 Overview
1
2
4
5
3
6
7
8
9
10
11

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
15
Table 1-12 Description
No.
Description
1
Microphone
2
Infrared light (Optional)
3
Micro SD card slot
4
LINK: Network status LED indicator.
LED indicator is solid yellow when network connection is functioning
properly.
5
Power LED indicator, It is solid red when power is applied to the unit.
6
Lens
7
ETHERNET: 10M / 100M self-adaptive Ethernet interface
8
RESET: Reset button
9
Speaker
10
Power supply interface
11
Screw hole, used to fix the camera to the bracket
Note:
After the powering on of the camera, pressing and holding the RESET button for about 10 seconds
can reset all the parameters to the default settings.
Camera wiring Diagram:
Figure 1-23 Wiring Diagram
1.4.2 Cube Camera II
Camera description:

Quick Operation Guide of Network Camera
© Hikvision Digital Technology Co., Ltd. All Rights Reserved.
16
Figure 1-24 Overview
Table 1-13 Description
No.
Description
1
Photosensitive resistance
2
Infrared light
3
PIR sensor
4
Microphone
5
Lens
6
Alarm: Indicator is solid red when the camera is armed with PIR and
access control and it is solid blue when the camera is unarmed.
7
Indicator flashes blue when movement or presence is detected in
its field of view.
8
Link: Indicator flashes orange when network connection is
functioning properly.
9
Tri-axial adjustment bracket
10
USB interface
11
Battery
12
Speaker
13
RESET: Reset button
14
Micro SD card slot
15
Power supply interface
16
10M / 100M self-adaptive Ethernet interface & PoE
Note:
After the powering on of the camera, pressing and holding the RESET button for about 10 seconds
can reset all the parameters to the default settings.
Camera wiring diagram:
1
2
3
4
6
7
8
5
9
10
11
12
13
14
16
15