Hikmicro HM-TD1017-2/QW-HS121 User manual

Thermal Presence Detector
Quick Start Guide

1
Thermal Presence Detector
English
7
Thermischer Anwesenheitsmelder
Deutsch
13
Détecteur thermique de présence
Français
19
Detector térmico de presencia
Español
24
Detetor de presença térmico
Português
30
Termorilevatore di presenza
Italiano
36
Termální detektor přítomnosti
Čeština
41
Teplocitlivý detektor prítomnosti osôb
Slovenčina
46
Detektor termiczny
Polski
51
Termikus jelenlét-érzékelő
Magyar
57
Detector de prezență termic
Română
62
Detector thermale aanwezigheid
Nederlands
68
Termisk tilstedevæ relsesdetektor
Dansk
74
Termisk næ rvæ rsdeteksjon
Norsk
79
Lämmön läsnäolon tunnistin
Suomi
84
Termisk närvarodetektor
Svenska
89
Тепловой датчик присутствия
Русский
94
Termal Varlık Dedektörü
Türkçe
100
熱源検知器
日本語
105
열감지기
영어
110
熱顯像儀
繁體中文
115

2
A
B
1
①

3
②
③

4
④
2
①

5
②
③
④

6
C
1
2
2.1
2.2

7
English
Product appearance is for
reference only and may
differ from the actual product.
Interface and Button (Page 2 - A)
1. RS-485 & Alarm Interface
2. USB Type-C
3. MicroSD Slot
4. Reset Button: Restore to default
settings.
Install the Camera (Page 2 - B)
1. Wall mounting of the camera
a: Wall mounting bracket
b: Ceiling mounting bracket
2. Ceiling mounting of the camera
Note:
The drill cable hole is within the
grey circle.
The detection area is a 4:3
rectangle.
The arrows’direction in B-2-①is
the long side of detection area.
Wi-Fi Connection
Connect to Wi-Fi via Web Browser
Before You Start
Check the label on the device or the
package to obtain the device serial
number.
Steps
1. Power on the device.
2. Enable the Wi-Fi function on your
phone or computer, and select the
device wireless AP (Access Point).
Note: The device AP is
HM-AP_XXXXXX, e.g.
HM-AP_ABCDEF.
3. Enter the password of the device
AP.
Note: The password is the last 8
digits of the device serial number.
For example, if the device serial
number is D12345678, the
password of the device AP is
12345678.
4. Start the browser on your phone
or computer. Click Refresh on the
web, and then select the Wi-Fi
network to be connected to.
5. Enter the password of the Wi-Fi
network.
6. Check the status of the indicator
to determine whether the
connection is successful.
–Flash about every 2 seconds:
Wi-Fi connection succeeded.
–Flash about every 0.2 seconds:
Wi-Fi connection failed.
Detection Range (Page 6 - C)
The detection range of ceiling
mounting in C - 1.
Mounting
Height (h)
Length
(a)
Width
(b)
3.0 m
3.2 m
2.0 m
4.2 m (Max.)
5.7 m
3.6 m
The detection range of wall
mounting in C - 2 - 2.1.
Mounting Height (h)
2.8 m
Depression Angle of
Bracket (α)
57.5°
Distance of Blind Area (c)
0 m
Effective Detection
Distance (d)
3 m
The detection range of wall
mounting in C - 2 - 2.2.
Nearest Horizontal
Effective Distance (d1)
2.3 m
Farthest Horizontal
Effective Distance (d2)
5.7 m
Distance of Blind Area (c)
0 m
Effective Detection
Distance (d)
3 m
Note:
The grey area refers to the effective
detection area.
User Manual
For detailed information, refer to
the user manual of the device.

8
© 2021 Hangzhou Microimage
Software Co., Ltd. All rights
reserved.
About this Manual
The Manual includes instructions
for using and managing the Product.
Pictures, charts, images and all
other information hereinafter are
for description and explanation only.
The information contained in the
Manual is subject to change,
without notice, due to firmware
updates or other reasons. Please
find the latest version of this
Manual at the HIKMICRO website
(www.hikmicrotech.com/).
Please use this Manual with the
guidance and assistance of
professionals trained in supporting
the Product.
Trademarks
and other HIKMICRO’s
trademarks and logos are the
properties of HIKMICRO in various
jurisdictions.
Other trademarks and logos
mentioned are the properties of
their respective owners.
DISCLAIMER
TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW,
THIS MANUAL AND THE PRODUCT
DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, ARE
PROVIDED “AS IS” AND “WITH ALL
FAULTS AND ERRORS”. HIKMICRO
MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WITHOUT
LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, OR
FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE
PRODUCT BY YOU IS AT YOUR OWN
RISK. IN NO EVENT WILL HIKMICRO
BE LIABLE TO YOU FOR ANY SPECIAL,
CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING,
AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS
OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER
BASED ON BREACH OF CONTRACT,
TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, OR OTHERWISE,
IN CONNECTION WITH THE USE OF
THE PRODUCT, EVEN IF HIKMICRO
HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR
LOSS.
YOU ACKNOWLEDGE THAT THE
NATURE OF THE INTERNET
PROVIDES FOR INHERENT SECURITY
RISKS, AND HIKMICRO SHALL NOT
TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER-ATTACK,
HACKER ATTACK, VIRUS INFECTION,
OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKMICRO WILL
PROVIDE TIMELY TECHNICAL
SUPPORT IF REQUIRED.
YOU AGREE TO USE THIS PRODUCT
IN COMPLIANCE WITH ALL
APPLICABLE LAWS, AND YOU ARE
SOLELY RESPONSIBLE FOR
ENSURING THAT YOUR USE
CONFORMS TO THE APPLICABLE
LAW. ESPECIALLY, YOU ARE
RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES
NOT INFRINGE ON THE RIGHTS OF
THIRD PARTIES, INCLUDING

9
WITHOUT LIMITATION, RIGHTS OF
PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA
PROTECTION AND OTHER PRIVACY
RIGHTS. YOU SHALL NOT USE THIS
PRODUCT FOR ANY PROHIBITED
END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION
OF WEAPONS OF MASS
DESTRUCTION, THE DEVELOPMENT
OR PRODUCTION OF CHEMICAL OR
BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT
RELATED TO ANY NUCLEAR
EXPLOSIVE OR UNSAFE NUCLEAR
FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS
BETWEEN THIS MANUAL AND THE
APPLICABLE LAW, THE LATTER
PREVAILS.
Regulatory Information
FCC Information
Please take attention that changes
or modification not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the
equipment.
FCC compliance: This equipment
has been tested and found to
comply with the limits for a Class B
digital device, pursuant to part 15
of the FCC Rules. Operation is
subject to the following two
conditions:
(1) this device may not cause
interference, and
(2) this device must accept any
interference, including interference
that may cause undesired operation
of the device.
These limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. This equipment
generates, uses and can radiate
radio frequency energy and, if not
installed and used in accordance
with the instructions, may cause
harmful interference to radio
communications. However, there is
no guarantee that interference will
not occur in a particular installation.
If this equipment does cause
harmful interference to radio or
television reception, which can be
determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
—Reorient or relocate the receiving
antenna.
—Increase the separation between
the equipment and receiver.
—Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
—Consult the dealer or an
experienced radio/TV techniciaan
for help
EU Conformity Statement
This product and - if
applicable - the supplied
accessories too are marked
with "CE" and comply therefore
with the applicable harmonized
European standards listed under the
Low Voltage Directive 2014/35/EU,
the EMC Directive 2014/30/EU, the
RoHS Directive 2011/65/EU.
2012/19/EU (WEEE
directive): Products marked
with this symbol cannot be
disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
upon the purchase of equivalent
new equipment, or dispose of it at
designated collection points. For
more information, please see: