Hikmicro Pocket Series User manual

Contact Us
Handheld Thermography Camera
HIKMICRO Pocket Series
User Manual
HIKMICRO SP Series

Pocket Series User Manual
i
Legal Information
Read all information and instructions in this document carefully before using the
device and keep it for further reference.
For more device information and instructions, please visit our website at
http://www.hikmicrotech.com. You can also refer to other documents (if any)
accompanying the device to get more information.
About this Manual
The Manual includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only. The information contained in the Manual is subject to change,
without notice, due to firmware updates or other reasons. Please find the latest
version of this Manual at the HIKMICRO website (http://www.hikmicrotech.com).
Please use this Manual with the guidance and assistance of professionals trained in
supporting the Product.
© 2023 Hangzhou Microimage Software Co., Ltd. All rights reserved.
Trademarks
and other HIKMICRO's trademarks and logos are the
properties of HIKMICRO in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective
owners.
Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND
THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKMICRO MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR
PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT
WILL HIKMICRO BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL,
OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF
SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF

Pocket Series User Manual
ii
CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE,
IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKMICRO HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKMICRO SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKMICRO WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS,
AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO
THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS
PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD
PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL
PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL
NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE
DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE
DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY
ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE
NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE
LAW, THE LATTER PREVAILS.

Pocket Series User Manual
iii
Regulatory Information
These clauses apply only to the products bearing the corresponding mark or
information.
FCC Information
Note: This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note: Due to the device size limit, the above statement may not be disclaimed on
the device.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are
marked with "CE" and comply therefore with the applicable
harmonized European standards listed under the Directive
2014/30/EU (EMCD), Directive 2014/35/EU (LVD), Directive
2011/65/EU (RoHS).

Pocket Series User Manual
iv
This product and - if applicable - the supplied accessories too are
marked with "UKCA" and comply therefore with the following
directives: Radio Equipment Regulations 2017, Electromagnetic
Compatibility Regulations 2016, Electrical Equipment (Safety)
Regulations 2016, the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations 2012.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, when operating
in the 5150 to 5350 MHz frequency range, this device is restricted to
indoor use in: Austria (AT), Belgium (BE), Bulgaria (BG), Croatia (HR),
Cyprus (CY), the Czech Republic (CZ), Denmark (DK), Estonia (EE),
Finland (FI), France (FR), Germany (DE), Greece (EL), Hungary (HU),
Iceland (IS), Ireland (IE), Italy (IT), Latvia (LV), Liechtenstein (LI),
Lithuania (LT), Luxembourg (LU), Malta (MT), Netherlands (NL),
Northern Ireland (UK(NI)), Norway (NO), Poland (PL), Portugal (PT),
Romania (RO), Slovakia (SK), Slovenia (SI), Spain (ES), Sweden (SE),
Switzerland (CH), and Turkey (TR).
In accordance with the Radio Equipment Regulations 2017 in the UK,
the device working in the 5150 to 5350 MHz frequency range is
restricted to indoor use in the United Kingdom.
Frequency Bands and Power (for CE/UKCA)
The frequency bands and modes and transmitting power (radiated
and/or conducted) nominal limits applicable to the following radio
equipment are as follows:
Wi-Fi: 2.4 GHz (2.4 GHz to 2.4835 GHz): 20 dBm; 5 GHz (5.15 GHz to
5.25 GHz): 23 dBm; 5 GHz (5.25 GHz to 5.35 GHz): 23 dBm; 5 GHz
(5.47 GHz to 5.725GHz): 23 dBm; 5 GHz (5.725 GHz to 5.85 GHz): 14
dBm
Bluetooth: 2.4 GHz (2.4 GHz to 2.4835 GHz): 20 dBm
Use the power adapter provided by a qualified manufacturer. Refer
to the product specification for detailed power requirements.
Use the battery provided by a qualified manufacturer. Refer to the
product specification for detailed battery requirements.

Pocket Series User Manual
v
Directive 2012/19/EU (WEEE Directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in the
European Union. For proper recycling, return this product to your
local supplier upon the purchase of equivalent new equipment, or
dispose of it at designated collection points. For more information
see: www.recyclethis.info
According to the Waste Electrical and Electronic Equipment
Regulations 2013: Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the United Kingdom. For
proper recycling, return this product to your local supplier upon the
purchase of equivalent new equipment, or dispose of it at designated
collection points. For more information see: www.recyclethis.info.
Directive 2006/66/EC and its amendment 2013/56/EU (Battery
Directive): This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is
marked with this symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For
more information see: www.recyclethis.info
According to the Batteries and Accumulators (Placing on the Market)
Regulations 2008 and the Waste Batteries and Accumulators
Regulations 2009: This product contains a battery that cannot be
disposed of as unsorted municipal waste in the United Kingdom. See
the product documentation for specific battery information. The
battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper
recycling, return the battery to your supplier or to a designated
collection point. For more information see: www.recyclethis.info.
Industry Canada ICES-003 Compliance
This device meets the CAN ICES-003 (B)/NMB-003 (B) standards requirements.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause

Pocket Series User Manual
vi
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même
si le brouillage est susceptible d'en compromettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment.
ce matériel est conforme aux limites de dose d'exposition aux rayonnements, CNR-
102 énoncée dans un autre environnement.
(i) The device for operation in the band 5150-5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) The maximum antenna gain permitted for devices in the bands 5250-5350 MHz
and 5470-5725 MHz shall comply with the e.i.r.p. limit; and
(iii) The maximum antenna gain permitted for devices in the band 5725-5825 MHz
shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-
point operation as appropriate.
(i) Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
(ii) Le gain d'antenne maximal autorisé pour les appareils dans les bandes 5250-5350
MHz et 5470-5725 MHz doivent respecter le pire limiter; et
(iii) Le gain d'antenne maximal autorisé pour les appareils dans la bande 5725-5825
MHz doivent respecter le pire limites spécifiées pour le point-à-point et
l'exploitation non point à point, le cas échéant.
KC
B급기기: 이기기는 가정용(B급) 전자파적합기기로써 주로 가정에서
사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수있습니다.
INFORMATIONEN FÜR PRIVATE HAUSHALTE
1. Getrennte Erfassung von Altgeräten:

Pocket Series User Manual
vii
Elektro- und Elektronikgeräte, die zu Abfall geworden sind, werden als Altgeräte
bezeichnet. Besitzer von Altgeräten haben diese einer vom unsortierten
Siedlungsabfall getrennten Erfassung zuzuführen. Altgeräte gehören insbesondere
nicht in den Hausmüll, sondern in spezielle Sammel- und Rückgabesysteme.
2. Batterien und Akkus sowie Lampen:
Besitzer von Altgeräten haben Altbatterien und Altakkumulatoren, die nicht vom
Altgerät umschlossen sind, die zerstörungsfrei aus dem Altgerät entnommen
werden können, im Regelfall vor der Abgabe an einer Erfassungsstelle vom Altgerät
zu trennen. Dies gilt nicht, soweit Altgeräte einer Vorbereitung zur
Wiederverwendung unter Beteiligung eines öffentlich-rechtlichen
Entsorgungsträgers zugeführt werden.
3. Möglichkeiten der Rückgabe von Altgeräten:
Besitzer von Altgeräten aus privaten Haushalten können diese bei den
Sammelstellen der öffentlich-rechtlichen Entsorgungsträger oder bei den von
Herstellern oder Vertreibern im Sinne des ElektroG eingerichteten
Rücknahmestellen unentgeltlich abgeben. Rücknahmepflichtig sind Geschäfte mit
einer Verkaufsfläche von mindestens 400 m²für Elektro- und Elektronikgeräte sowie
diejenigen Lebensmittelgeschäfte mit einer Gesamtverkaufsfläche von mindestens
800 m², die mehrmals pro Jahr oder dauerhaft Elektro- und Elektronikgeräte
anbieten und auf dem Markt bereitstellen. Dies gilt auch bei Vertrieb unter
Verwendung von Fernkommunikationsmitteln, wenn die Lager- und Versandflächen
für Elektro- und Elektronikgeräte mindestens 400 m²betragen oder die gesamten
Lager- und Versandflächen mindestens 800 m²betragen. Vertreiber haben die
Rücknahme grundsätzlich durch geeignete Rückgabemöglichkeiten in zumutbarer
Entfernung zum jeweiligen Endnutzer zu gewährleisten. Die Möglichkeit der
unentgeltlichen Rückgabe eines Altgerätes besteht bei rücknahmepflichtigen
Vertreibern unter anderem dann, wenn ein neues gleichartiges Gerät, das im
Wesentlichen die gleichen Funktionen erfüllt, an einen Endnutzer abgegeben wird.
4. Datenschutz-Hinweis:
Altgeräte enthalten häufig sensible personenbezogene Daten. Dies gilt insbesondere
für Geräte der Informations- und Telekommunikationstechnik wie Computer und
Smartphones. Bitte beachten Sie in Ihrem eigenen Interesse, dass für die Löschung
der Daten auf den zu entsorgenden Altgeräten jeder Endnutzer selbst
verantwortlich ist.
5. Bedeutung des Symbols „durchgestrichene Mülltonne“:
Das auf Elektro- und Elektronikgeräten regelmäßig abgebildete Symbol einer
durchgestrichenen Mülltonne weist darauf hin, dass das jeweilige Gerät am

Pocket Series User Manual
viii
Ende seiner Lebensdauer getrennt vom unsortierten Siedlungsabfall zu erfassen ist.

Pocket Series User Manual
ix
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Description
Danger
Indicates a hazardous situation which, if not avoided, will
or could result in death or serious injury.
Caution
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance degradation, or unexpected results.
Note
Provides additional information to emphasize or
supplement important points of the main text.

Pocket Series User Manual
x
Safety Instruction
These instructions are intended to ensure that user can use the product
correctly to avoid danger or property loss. Please read all the safety
information carefully before using.
Laws and Regulations
●Use of the product must be in strict compliance with the local electrical
safety regulations.
Transportation
●Keep the device in original or similar packaging while transporting it.
●Keep all wrappers after unpacking them for future use. In case of any
failure occurred, you need to return the device to the factory with the
original wrapper. Transportation without the original wrapper may
result in damage on the device and the company shall not take any
responsibilities.
●DO NOT drop the product or subject it to physical shock. Keep the
device away from magnetic interference.
Power Supply
●Input voltage should meet the Limited Power Source (3.85 VDC, 570
mA) according to the IEC62368 standard. Please refer to technical
specifications for detailed information.
●Make sure the plug is properly connected to the power socket.
●DO NOT connect multiple devices to one power adapter, to avoid over-
heating or fire hazards caused by overload.
●Use the power adapter provided by a qualified manufacturer. Refer to
the product specification for detailed power requirements.
Battery
●Improper use or replacement of the battery may result in explosion
hazard. Replace with the same or equivalent type only. Dispose of used

Pocket Series User Manual
xi
batteries in conformance with the instructions provided by the battery
manufacturer.
●The built-in battery cannot be dismantled. Please contact the
manufacture for repair if necessary.
●For long-term storage of the battery, make sure it is fully charged every
half year to ensure the battery quality. Otherwise, damage may occur.
●Use the battery provided by a qualified manufacturer. Refer to the
product specification for detailed battery requirements.
●DO NOT charge other battery types with the supplied charger. Confirm
there is no flammable material within 2 m of the charger during
charging.
●DO NOT place the battery near heating or fire source. Avoid direct
sunlight.
●DO NOT swallow the battery to avoid chemical burns.
●DO NOT place the battery in the reach of children.
●When the device is powered off and the RTC battery is full, the time
settings can be kept for 6 months.
●In the first use, charge the device for more than 2.5 hours in the power-
off status.
●The lithium battery voltage is 3.85 V, and the battery capacity is 2100
mAh.
●The battery is certified by UL2054.
Maintenance
●If the product does not work properly, please contact your dealer or the
nearest service center. We shall not assume any responsibility for
problems caused by unauthorized repair or maintenance.
●A few device components (e.g., electrolytic capacitor) require regular
replacement. The average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
●Wipe the device gently with a clean cloth and a small quantity of
ethanol, if necessary.
●If the equipment is used in a manner not specified by the manufacturer,

Pocket Series User Manual
xii
the protection provided by the device may be impaired.
●Please notice that the current limit of USB 3.0 PowerShare port may
vary with the PC brand, which is likely to result in incompatibility issue.
Therefore, it’s advised to use regular USB 3.0 or USB 2.0 port if the USB
device fails to be recognized by PC via USB 3.0 PowerShare port.
●Your camera will periodically perform a self-calibration to optimize
image quality and measurement accuracy. In this process, the image
will pause briefly and you will hear a “click” as a shutter moves in front
of the detector. The self-calibration will be more frequent during start
up or in very cold or hot environments. This is a normal part of
operation to ensure optimum performance for your camera.
Calibration Service
●We recommend you send the device back for calibration once a year,
and please contact the local dealer for the information on maintenance
points. For more detailed calibration services, please refer to
https://www.hikmicrotech.com/en/calibrationservices/2.
Using Environment
●Make sure the running environment meets the requirement of the
device. The operating temperature shall be -10 °C to 50 °C (14 °F to
122 °F), and the operating humidity shall be 95% or less.
●This device can only be safely used in the region below 2000 meters
above the sea level.
●Place the device in a dry and well-ventilated environment.
●DO NOT expose the device to high electromagnetic radiation or dusty
environments.
●DO NOT aim the lens at the sun or any other bright light.
●When any laser equipment is in use, make sure that the device lens is
not exposed to the laser beam, or it may burn out.
●DO NOT aim the lens at the sun or any other bright light.
●The device is suitable for indoor and outdoor uses, but do not expose it
in wet conditions.

Pocket Series User Manual
xiii
●The level of protection is IP 54.
●The pollution degree is 2.
Technical Support
The https://www.hikmicrotech.com/en/contact-us.html portal will help
you as a HIKMICRO customer to get the most out of your HIKMICRO
products. The portal gives you access to our support team, software and
documentation, service contacts, etc.
Emergency
●If smoke, odor, or noise arises from the device, immediately turn off the
power, unplug the power cable, and contact the service center.
Manufacture Address
Room 313, Unit B, Building 2, 399 Danfeng Road, Xixing Subdistrict,
Binjiang District, Hangzhou, Zhejiang 310052, China
Hangzhou Microimage Software Co., Ltd.
COMPLIANCE NOTICE: The thermal series products might be subject to
export controls in various countries or regions, including without
limitation, the United States, European Union, United Kingdom and/or
other member countries of the Wassenaar Arrangement. Please consult
your professional legal or compliance expert or local government
authorities for any necessary export license requirements if you intend to
transfer, export, re-export the thermal series products between different
countries.

Pocket Series User Manual
xiv
Contents
Chapter 1 Overview........................................................................................................................1
1.1 Device Description ............................................................................................................1
1.2 Main Function...................................................................................................................1
1.3 Appearance.......................................................................................................................2
Chapter 2 Preparation....................................................................................................................5
2.1 Charge Device ...................................................................................................................5
2.2 Power On/Off ................................................................................................................... 5
2.2.1 Set Auto Power-off Duration..................................................................................5
2.3 Operation Method............................................................................................................5
2.4 Menu Description .............................................................................................................6
Chapter 3 Display Settings.............................................................................................................. 7
3.1 Set Screen Brightness........................................................................................................7
3.2 Set Display Mode..............................................................................................................7
3.3 Set Palettes.......................................................................................................................9
3.4 Adjust Display Temperature Range.................................................................................10
3.5 Adjust Digital Zoom ........................................................................................................11
3.6 Display OSD Info .............................................................................................................11
Chapter 4 Temperature Measurement.........................................................................................13
4.1 Set Measurement Parameters........................................................................................ 13
4.1.1 Set Unit ................................................................................................................ 14
4.2 Set Image Measurement................................................................................................. 14
4.3 Set Temperature Alarm .................................................................................................. 14
Chapter 5 Picture and Video.........................................................................................................16
5.1 Capture Picture...............................................................................................................16
5.2 Record Video................................................................................................................... 18
5.3 Manage Albums..............................................................................................................19
5.4 View Recorded Files........................................................................................................21
5.5 Manage Files...................................................................................................................22
5.6 Export Files ..................................................................................................................... 24

Pocket Series User Manual
xv
Chapter 6 Connect Bluetooth ....................................................................................................... 25
Chapter 7 Set LED Light ................................................................................................................26
Chapter 8 Cast Device Screen to PC.............................................................................................. 27
Chapter 9 Set Macro Mode .......................................................................................................... 28
Chapter 10 Connect Device to Wi-Fi............................................................................................. 29
Chapter 11 Set Device Hotspot..................................................................................................... 30
Chapter 12 Thermal View Mobile Client Connection....................................................................31
12.1 Connect via Wi-Fi ..........................................................................................................31
12.2 Connect via Hotspot......................................................................................................31
Chapter 13 Maintenance.............................................................................................................. 33
13.1 View Device Information ..............................................................................................33
13.2 Set Date and Time.........................................................................................................33
13.3 Upgrade Device............................................................................................................. 33
13.4 Restore Device .............................................................................................................. 34
13.5 Initialize Memory Card.................................................................................................. 34
13.6 About Calibration..........................................................................................................34
Chapter 14 Appendix.................................................................................................................... 35
14.1 Common Material Emissivity Reference .......................................................................35
14.2 Device Command..........................................................................................................35
14.3 Device Communication Matrix......................................................................................36
14.4 FAQ ............................................................................................................................... 36

Pocket Series User Manual
1
Chapter 1 Overview
1.1 Device Description
The handheld thermography camera is a device with both optical images
and thermal images. It can do thermography, video recording, snapshot
capturing, alarm, and it can connect to Wi-Fi, hotspot and Bluetooth. The
built-in high-sensitivity IR detector and high-performance sensor detects
the variation of temperature and measure the real-time temperature. The
temperature measurement range is -20 °C to 400 °C (-4 °F to 752 °F), with
the accuracy of ± 2 °C (± 3.6 °F) or 2% when the ambient temperature is
15 °C to 35 °C (59 °F to 95 °F) and the object temperature is above 0 °C
(32 °F).
The device is easy to use, and adopts ergonomic design. It is widely used
for building inspection, HVAC, as well as electrical and mechanical
equipment maintenance.
1.2 Main Function
Temperature Measurement
Device detects the real-time temperature, and displays it on the screen.
Fusion
Device can display fusion of thermal view and optical view.
Palettes and Alarm
Device supports multiple palettes, and you can set the palette mode
according to the alarm function.
Client Software Connection
●Mobile Phone: You can view live view, capture snapshots, and record
videos via HIKMICRO Viewer App on your phone. You can also, analyze

Pocket Series User Manual
2
pictures offline, generate and share a report via the app. Scan the QR
codes on the cover to download the App.
HIKMICRO Viewer Android
HIKMICRO Viewer iOS
●PC: You can download HIKMICRO Analyzer
(https://www.hikmicrotech.com/en/industrial-products/hikmicro-
analyzer-software.html) to analyze pictures offline professionally, and
generate a custom format report on your PC.
Bluetooth
Device can be connected to headset via Bluetooth, and you can hear the
voice in the recording.
1.3 Appearance

Pocket Series User Manual
3
Figure 1-1 Appearance
Table 1-1 Button and Interface Description
No.
Description
Function
1
Home Key
Tap to return to the live view interface.
2
File Key
Tap to enter albums.
3
Settings Key
Tap to enter settings interface.
4
Flash Light
Fill light on objects and output flashing
alarm.
5
Thermal Lens
View the thermal image.
6
Optical Lens
View the optical image.
7
Power Key
Hold to power on/off the device.
8
Capture Key
Press in live view mode: capture
snapshots/stop recording
Press in menu mode: return to the live
view interface
Hold: start recording

Pocket Series User Manual
4
No.
Description
Function
9
Tripod Mount
Mount the tripod.
10
Strap Attachment
Point
Mount the strap.
11
Indicator
Indicate the charging status of the device.
Solid red: charging normally
Flashing red: charging exception
Solid green: fully charged
12
Type-C Interface
Charge the device or export files with
Type-C cable.
13
Buzzer
Output audible alarm.
14
Microphone
Record audio.
Note
Your camera will periodically perform a self-calibration to optimize image
quality and measurement accuracy. In this process, the image will pause
briefly and you’ll hear a “click” as a shutter moves in front of the detector.
The prompt “Calibrating …” appears in the upper center of the screen as
the device is calibrating itself. The self-calibration will be more frequent
during start up or in very cold or hot environments. This is a normal part
of operation to ensure optimum performance for your camera.