Hiland Premium Series User manual

MODEL # FT-51216
AZPH-YAYI
Questions, problems, missing parts? For small parts please call 1-888-775-1330 for
assistance, 8 a.m. - 4 p.m., MST, Monday - Friday. For damaged product, you may have to
return to the retailer.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
40" Slate Top
Wood Burning Firepit

Item Number: FTB-51216
Product Name: 40 Inch Slate Fire Pit
•This fire bowl is intended for outdoor use only. Do not use on wooden decks.
WARNINGS:
•This fire bowl is intended to burn wood logs only. Do not burn coal, leaves, or other combustible
materials in the fire bowl.
•Not for use by children. Keep children and pets away from the fire bowl.
•The fire bowl is hot. Use with caution. Do not touch the hot fire bowl with bare hands.
•Never leave any burning fire bowl unattended, always extinguish the fire completely before leaving
the fire bowl.
•Do not use near flammable or combustible objects or materials.
•When the fire bowl is in use, the handle on the mesh screen can reach extreme temperatures that
can cause serious injury to an unprotected hand. Use a poker or an appropriate heat resistant glove
or pad when handling.
•Check local fire regulations and municipal by-laws for safe use.
FIRE PIT PARTS LIST
HARDWARE LIST
No. Hardware Qty
AA M6*12 bolt 14
BB M6 Nut 2
No.
Step By Step Assembly Instructions:
PARTS Qty
A Handle 1
B Mesh Screen 1
C Log Grate 1
D Fire Bowl 1
E Slate Top 1
F Leg 4
G Support Ring 1
H Poker 1
OWNER'S MANUAL

Step 1: Choose a level location for assembly. Remove all parts from packaging，check
parts list for missing parts.
Step 2: Attach Leg (F) to Slate Top (E) by using 8pcs M6*12 bolts (AA) Do not fully tighten
at first!
Step 3: Attach Support Ring (G) to 4 Legs (F) by using 4pcs M6*12 bolts(AA) tightened,
once ring is attached tighten all the bolts.
Step 4: Insert Handle (A) into mid hole of Mesh Screen (B) by using M6*12MM bolts (AA)
and M6 Nut (BB) tightened.

Step 5: Place Log Grate(C) and Mesh Screen (B) into the Fire Bowl. Then put the Fire Bowl
(D) into the Slate top.
Now your fire pit is ready for use!