Hiland YFP-022 User manual

MODEL #YFP-022
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-888-775-1330, 8a.m. - 4 p.m., PST, Monday - Friday.
ATTACH YOUR RECEIPT HERE
Serial Number Purchase Date
30" Wood Burning Firepit
with Scroll Design

Item Number: YFP-022
Product Name: 30"Wood Burning Firepit with Scroll Design
•This firepit is intended foroutdoor use only.
WARNINGS: Do not
•This firepit is intended to burn wood logs only. Donot burn coal, leaves, orother combustible
materials in thepit.
use on wooden decks.
•Not for use bychildren. Keep children and pets away from this firepit.
•The firepit is hot. Use with caution. Donot touch thehot firepit with bare hands.
•Never leave theburning firepit unattended, and always extinguish thefire completely before leaving
the firepit.
•Do not use near flammable or combustible objects or materials.
•When thefirepit is inuse, thehandle onthemesh screen can reach extreme temperatures that can
cause serious injury to anunprotected hand. Use apoker oran appropriate heat resistant glove orpad
when handling.
•DO NOT use this firepit as a cooking appliance. Thisfirepit is not designed forgrilling food.
•Check local fire regulations and municipal by-laws for safe use.
•Read all safety guidelines, warnings, instructions, and operating rules carefully before assembling and
using this product.
•Some parts may contain sharp edges—especially as noted in the manual. Wear protective
gloves if necessary.
PARTS LIST
HARDWARE LIST
Note: You will need a screwdriver to complete the assembly.
No. PARTS Qty
A Lift Handle 1
B Screen 1
C Wood grate 1
D Fire Bowl 1
E Frame Ring 1
F Decorative Frame 6
G Base 1
H Fire Poker 1
No. Hardware Qty
I M6*12 Bolt 18
J M6 Nut 6
OWNER'S MANUAL

Step 1: Attach Lift Handle (A) to Screen (B); tighten with Nut M6 (J), as per Fig. 1
Step 2: Attach Frame Ring (E) to Decorative Frame (F) using Bolts (I). Do not fully tighten the bolts.
Step 3: Connect Base (G) to Decorative Frame (F) using Bolts (I) and Nut (J). Fully tighten all bolts.
Step 4: Place D, C, and Bon the assembled frame. The firepit is now ready for use.