Hillrom LIFE2000 Ventilator User manual

EXTENDED RANGE
CONFIGURATION
QUICK START GUIDE
Life2000®Ventilation System

Life2000®Compressor
or
Connect
External Power Supply
to Compressor
Plug
AC Power Cord
into outlet
Connect
AC Power Cord
to External Power Supply
Step One: Connect Compressor
External Power Supply AC Power Cord
What You’ll
Need for
This Step
Power Supply will click into place.
Lock Tab will be on top.
Power is connected properly when Green Indicator Light on External Power Supply is lit

Step Two: Connect Ventilator
CombO2®Hose
Life2000
Ventilator
Connect
CombO2
Hose to
Compressor
Connect
CombO2Hose
to the Breathe Pillows
Interface
Connect
- CombO2Hose to Ventilator
- Breathe Pillows Interface to Ventilator
Breathe
Pillows
Interface
What You’ll
Need for
This Step
Life2000®Compressor
or
CombO2Hose will click into place.

Disconnect
Current Oxygen Hose
from Concentrator
Connect
CombO2Hose
to Concentrator
Step Three: Change Oxygen Connection
Oxygen Concentrator
Remove
Current oxygen
cannula from face
Put On
Breathe Pillows
Interface
CombO2®Hose
Breathe
Pillows
Interface
What You’ll
Need for
This Step
(Not provided by Hillrom)
Ensure your oxygen is set to your prescribed liter flow.

Life2000®and CombO2®are registered trademarks of Breathe Technologies, Inc., a Hill-Rom company. Hill-Rom reserves the right to make changes without
notice in design, specifications and models. The only warranty Hill-Rom makes is he express written warranty extended on the sale or rental of its products.
© 2021 Hill-Rom Services PTE Ltd. ALL RIGHTS RESERVED. APR186301 rev 1 26-JAN-2021 ENG – US
For more information about products or services, please contact your Hillrom sales
representative or Hillrom customer service at 1-800-426-4224.
hillrom.com/en/products/life2000-system